The Mutual Conversion of CO2 and CO in Dielectric Barrier Discharge (DBD)

Non-equilibrium plasma, which was engendered by dielectric barrier discharge (DBD) was used to analyze the mutual conversion between CO₂ and CO. The results showed that the conversion ratio of CO increased monotonously with the increasing voltage. But CO₂ was not so. Its conversion ratio reached maximum when the voltage was 3600 V in Ar system. It also showed that the existence of water molecules was more advanageous for the conversion of CO to CO₂ in Air system than in oxygen system, and the conversion ratio could reach 75.8% when the relative humidity was 100%. We also discussed the energy yield and energy efficiency, and the result was that high voltage and high concentration of reactant was disadvantageous for energy utilization.     

PREPARATION OF PARTICLE SIZE NARROWLY DISTRIBUTED LOW-DENSITY STYRENE DIVINYLBENZENE COPOLYMER MICROBEADS

In view of the importance of dispersion agent, the amount of the crosslinking monomer andthe diluent in suspension polymerization for the production of particle size narrowly distributedIow-density styrene divinylbenzene copolymer microbeads (LDPS), their actions are preliminarilyinvestigated in this paper. Experimental results indicate that when both the gelatine and polyvinylalcohol (PVA) are used as dispersion agents, the better effect is achieved. DVB is helpful to theformation of the lower density fine particles, the proportion of the DVB/St should be between1:1～1.5:1. Compared with toluene, gasoline is the more effective diluent for the above target.     

Vertically aligned γ-AlOOH nanosheets on Al foils as flexible and reusable substrates for NH<Subscript>3</Subscript> adsorption

Vertically aligned γ-AlOOH nanosheets (NSs) have been successfully fabricated on flexible Al foils via a solvothermal route without morphology-directing agents. Three different reaction temperature (25, 80, and 120 ?C) and time (30 min, 45 min, and 24 h) are discussed for the growth period, which efficiently tune the density and size of the γ-AlOOH NSs. Meanwhile, the growth speed of the nanosheets confirms that dominant growth stage is seen in the initial 45 min. Furthermore, the interlayer of the γ-AlOOH NSs displays an average height of 140 nm and superhydrophilicity. By dynamic adsorption, the assynthesized γ-AlOOH NSs exhibit an outstanding NH₃ adsorption capacity of up to 146 mg/g and stably excellent regeneration for 5 cycles. The mechanism of NH₃ adsorption on the in-plane of the γ-AlOOH NSs is explained by the Lewis acid/base theory. The H-bond interactions among the NH₃ molecules and the edge groups (-OH) further improve the capture ability of the nanosheets.     

高效液相色谱-电喷雾串联质谱法检测环境水样中22种抗生素类药物

建立了高效液相色谱-电喷雾串联质谱(HPLC-ESI MS/MS)分析环境水样中22种抗生素类药物的方法。采用HLB固相萃取柱对环境水样中的目标化合物进行富集、净化,然后以6 mL氨水-甲醇(5:95, v/v)溶液洗脱。收集的洗脱液经氮气吹干至1 mL,然后进行HPLC-ESI MS/MS分离分析。色谱流动相A相为甲醇-乙腈(1:1, v/v), B相为0.3%(体积分数)甲酸水溶液(含0.1%(体积分数)甲酸铵,pH 2.9);色谱柱为XTerra MS C18柱。质谱检测采用正离子扫描,多反应监测模式。分别以自来水和污水作为基质,22种抗生素类药物的加标平均回收率分别为54.9%～130%和57.4%～138%,相对标准偏差(n=3)分别为2.85%～28.6%和2.02%～23.2%;方法的检出限为0.05～0.5 ng/L。将建立的方法应用于北京市高碑店湖和小清河水样的分析,结果表明在两个水样中均有部分抗生素类药物检出。     

基于硅杂蒽类染料的荧光探针及其应用

近年来,荧光成像技术为人们研究活体细胞及组织内的化学生物学过程提供了有效的研究工具,可以无损、实时、原位地以高时空分辨率实现对目标物进行生物荧光成像与分析。荧光成像技术在生物学、环境监测、临床诊断和药物发现等诸多研究领域发挥着越来越重要的作用。生物荧光成像技术的最新进展对发展新型小分子荧光染料及探针提出了更高的要求。激发和发射波长位于近红外光区（600~900 nm）的荧光染料及探针由于具有光毒性低、生物分子自发荧光干扰小、光散射低、组织穿透能力强等优点,非常适合用于生物荧光成像领域。通过将罗丹明分子中O桥原子用Si代替,得到了一类新型的探针分子--硅杂蒽类荧光探针。这类染料分子在保留了氧杂蒽荧光染料优越的光学性质的同时,光谱发生明显红移,满足了近红外荧光检测的要求,具有良好的生物相容性。本文综述了近年来基于硅杂蒽及其衍生物荧光探针的合成及在金属离子、pH值、小分子、生物酶等检测方面的研究进展,并且简要阐述了基于硅杂蒽类探针分子的识别检测机理以及其在生物成像等方面的应用。     

In原子在GaAs(001)表面的成核与扩散研究

近年来,半导体量子点特别是InAs量子点的基本物理性质和潜在应用得到了广泛研究。许多研究者利用InAs量子点结构的改变以调制其光电特性。本文采用液滴外延法在GaAs(001)表面沉积了不同沉积量的In(3 ML、4 ML、5 ML),以研究In的成核机制和表面扩散。实验发现,随着In沉积量的增加,液滴尺寸(包括直径、高度)明显增大。不仅如此,在相同的衬底温度下,沉积量越大,液滴密度越大。利用经典成核理论,计算了GaAs(001)表面In液滴形成的临界厚度为0.57 ML,计算的结果与已报道的实验一致。从In原子在表面的迁移和扩散,以及衬底中Ga和液滴中的In之间的原子互混原理解释了In液滴形成和形貌演化的机理。实验中得到的In液滴临界厚度以及In液滴在GaAs(001)上成核机理,可以为制备InAs量子点提供实验指导。     

水坝在水流作用下动力响应的一种分析方法

以广东某水坝为研究对象,给出一种基于Fluent平台和Ansys平台进行结构动力响应分析的方法。首先采用基于YOUNGS界面重构技术的VOF模型,对流动进行数值模拟,成功捕捉了闸门开启过程中自由面的变化,比较了在三种落差情况下水坝的受力差异。计算表明,即使在上游平稳的入流条件下,水坝所受到的湍流水压力也会出现波动现象,水压力对坝体的冲击为低频作用,下游水位的升高会减缓水压力的波动,这些特点都与现场观察的相符。然后将水动力作为激励条件导入结构动力分析平台Ansys后,进一步对坝体结构进行动力分析。结构的模态分析结果与实测结果一致。因此,方法可以应用于实际。     

关于非定常系统零解的稳定性问题

本文研究了一般的非定常系统零解的稳定性问题,得到一些新结论,并且推广了某些已知结果。     

Multi-layer cartridges filled with multi-walled carbon nanotubes for the determination of volatile organic compounds in indoor air.

A kind of new multi-layer adsorbent including Tenax TA/multi-walled carbon nanotubes (MWCNTs)/Carboxen 564 was developed for collecting volatile organic compounds. The adsorption and desorption efficiencies of 11 kinds of adsorbents (including Activated charcoal, Tenax TA, Carboxen 564, Chromosorb 101, Chromosorb 102, Chromosorb 103, Chromosorb 105, Porapak Q, GDX 301, XAD-2, and MWCNTs) were compared. By combining the advantages of Tenax TA, MWCNTs, and Carboxen 564, new type of multi-layer adsorbents was developed. The adsorption and desorption efficiency, the sampling reproducibility, and the effect of water were improved using multi-layer adsorbents, Tenax TA/MWCNTs/Carboxen 564. New multi-layer adsorbents were successfully applied to the determination of volatile organic compounds (VOCs) in ambient air.     

Structure–property relationships of novel fluorinated polycarbonate polyurethane films with high transparency and thermal stability

Research on Chemical Intermediates - Novel polycarbonate diol (PCDL) was synthesized using dimethyl carbonate, 1,5-pentanediol (1,5-PD), 1,6-hexanediol (1,6-HD) and 1,4-cyclohexanedimethanol...