SAPO—11分子筛用i—Pr2NH导向合成及其酸性研究

以ＡｌＰＯ４、Ｈ３ＰＯ４、ＳｉＯ２等为原料采用单一模板剂ｉＰｒ２ＮＨ合成了ＳＡＰＯ１１分子筛，利用Ａｖｒａｍｉ方程等对合成过程进行了定量描述。还利用红外（ＩＲ）、程序升温脱附（ＴＰＤ）、线性丁烯骨架异构反应催化活性测试等手段表征了ＳＡＰＯ１１的酸性。结果表明，合成过程随温度有明显变化，晶化阶段的活化能远高于核化阶段的值。可用Ａｖｒａｍｉ方程的参数来表征合成过程的难易程度。分子筛中存在Ｂ酸和Ｌ酸位，主要在中等强度范围，从而对线性丁烯骨架异构反应有较好的催化活性。提高分子筛中硅含量可明显增大酸位浓度，酸强度也有轻度增强。     

A chemical sensor for the liquid-ordered phase

The mixing properties of exchangeable phospholipids, derived from 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine, with an exchangeable form of cholesterol have been used to monitor the transition from the liquid-disordered to the liquid-ordered phase in cholesterol-containing bilayers, made from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-distearoyl-sn-glycero-3-phosphocholine, respectively.     

Hydrodechlorination of Dichloromethane by a Metal-Free Triazole-Porphyrin Electrocatalyst: Demonstration of Main-Group Element Electrocatalysis**

In this work, the electrocatalytic reduction of dichloromethane (CH₂Cl₂) into hydrocarbons involving a main group element-based molecular triazole-porphyrin electrocatalyst H2PorT8 is reported. This catalyst converted CH₂Cl₂ in acetonitrile to various hydrocarbons (methane, ethane, and ethylene) with a Faradaic efficiency of 70 % and current density of −13 mA cm⁻² at a potential of −2.2 V vs. Fc/Fc⁺ using water as a proton source. The findings of this study and its mechanistic interpretations demonstrated that H2PorT8 was an efficient and stable catalyst for the hydrodechlorination of CH₂Cl₂ and that main group catalysts could be potentially used for exploring new catalytic reaction mechanisms.     

Investigating the effects of side chain length on the AIE properties of water-soluble TPE derivatives

The emissive properties of fluorophores in aggregated state are important for the development of bio-sensors or bio-imaging reagents. So three water-soluble TPE derivatives with different lengths of side chains have been synthesized and we investigated the effects of side chains on aggregation-induced emission (AIE) properties in the aggregated states. The results indicate that side chains on the fluorophores play a pivotal role in their emission in aggregated state mediated by heparin or solid state, because the coplanarity of these TPE derivatives was affected by side chains. The rates of radiative decay k_f and non-radiative decay k_nr have been obtained through the quantum yields and lifetime, and a larger k_f and smaller k_nr were present for compound TPE-C4N, suggesting that the aggregated TPE-C4N should posses the most remarkable fluorescent property.     

Amorphous Carbon Film with Self-modified Carbon Nanoparticles Synthesized by Low Temperature Carbonization of Phenolic Resin for Simultaneous Sensing of Dopamine and Uric Acid

A self-modified film electrode consisting of homogeneous snowflake-shaped nanoparticles on the amorphous carbon substrate (HNAC) was prepared by low temperature carbonization of phenolic resin. Such a unique structure was beneficial to enhance the electroanalysis signal responds. Simultaneous detection of DA and UA was performed on the HNAC using differential pulse voltammetry (DPV) at pH 8 phosphate buffer. The well-defined oxidation peak potential separation reached 260 mV between DA and UA. Meanwhile, the detection limit of HNAC were 0.401 μM (DA) and 2.800 μM (UA).     

具有聚集诱导发光性质的近红外荧光染料

聚集诱导发光(AIE)现象的发现为解决传统有机荧光分子在高浓度和聚集形态下存在的荧光猝灭问题提供了最佳方案,并实现了在光电器件、化学传感、生物成像和靶向治疗等众多领域的广泛应用.随着对AIE 发光机理研究的不断深入,AIE 分子体系得到了极大的扩展.其中,一类具有给体-受体结构的AIE分子能够显著降低分子能隙,使发光分...     

湿式氧化工艺中颗粒Ru催化剂的活性和稳定性

分别采用传统成型法和新的成型法制备了一系列以CeO2为主要成分的载体,将贵金属Ru浸渍在这些载体上制备了不同的催化剂.对催化剂的比表面积和机械强度进行了表征,并通过湿式氧化乙酸的静态实验和湿式氧化苯酚的动态实验分别考察了催化剂的活性和稳定性.结果表明,Ru负载在采用新方法成型的载体上制得的催化剂具有更大的比表面积.向CeO2中掺杂Zr能增大载体的比表面积.新方法制备的催化剂Ru/ZrO2-CeO2催化湿式氧化乙酸具有良好的活性,化学需氧量(COD)去除率为98%.在110h的催化湿式氧化苯酚反应中,苯酚和COD的去除率维持在96%左右,反应过程中活性组分的溶出浓度很小,催化剂表面有少量的积炭,但积炭在300℃能够被完全氧化.因而催化剂具有较好的稳定性和工业应用可能性.     

含膦酰杂菲侧基聚乙炔的合成与热稳定性

以2-(6-氧化-6-氢-二苯基(c,e)<1,2>氧杂磷酰基)-1,4-二羟基苯(ODOPB)结构单元为中心,在两侧通过酯化反应分别引入4-乙炔基苯甲酰基和4-烷氧基苯甲酰基,并作为乙炔单体,在[Rh(nbd)Cl]2催化下,30℃聚合得到了含磷酰杂菲(DOPO)基团的聚乙炔.1H-NMR和GPC分析表明,由于DOPO存在较大π共轭结构和较强极性效应,在诱导聚乙炔主链采取高反式构型的同时,增加了分子链内相邻侧基之间的相互作用,使整个分子链趋向二维共平面结构,有利于增强分子链之间的相互作用.TGA显示,与不含磷酰杂菲侧基的模型聚乙炔相比,DOPO的引入使聚乙炔呈现良好的热稳定性,起始热分解温度(T5%)接近400℃,说明通过增强分子链内侧基间相互作用有助于提高热稳定性.     

N-芳亚甲基-4-(4-甲氧基苯基)-5-(1H-1,2,4-三唑-1-基)-1,3-噻唑-2-胺的合成与生物活性

通过2-氨基-4-(4-甲氧基苯基)-5-(1H-1,2,4-三唑-1-基)-1,3-噻唑与取代苯甲醛发生缩合,合成了一系列新型含三唑环的噻唑席夫碱类化合物.利用1H NMR和元素分析对所有化合物进行了结构表征.初步的毒性试验表明,部分标题化合物具有一定的抗肿瘤活性.     

新型含2-取代-1,3-噻唑烷环的噻唑酰胺类化合物的合成与生物活性研究

为了寻找新的含噻唑杂环的先导化合物,利用¨(2-氰基亚胺基-1,3-噻唑烷-3-基)甲基]-2-氨基噻唑与取代苯甲酰氯(或乙酰氯)在吡啶存在下发生缩合反应,合成了19个新型含2-取代-1,3-噻唑烷环的噻唑酰胺类化合物4.经1HNMR和元素分析对目标化合物的结构进行了表征,经MS进一步证实了化合物4s的结构,并通过X射线单晶衍射分析测定了化合物4a的晶体结构.对所合成的目标化合物进行了生物活性测试,部分化合物表现出一定的杀菌和植物生长调节活性.