Low temperature synthesis of ITO nanoparticles using polyol process

A low temperature synthesis technique to prepare indium tin oxide (ITO) nanoparticles by the polyol process is proposed. On examining the phase formation of ITO nanoparticles in polyols and alcohols such as ethylene glycol, trimethylene glycol, and 1-heptanol, it was found that ITO nanoparticles could be synthesized directly without any post--annealing treatments at 175 °C in 1-heptanol. The morphology of the particles is influenced by the type of polyol. The composition of Sn in the ITO system could be easily controlled by simply varying the In/Sn precursor ratio in 1-heptanol. The low temperature synthesis method has enabled the formation of highly crystalline ITO nanoparticles with diameters less than 25 nm even at annealing temperatures as high as 700 °C.     

A mild photoactivated hydrophilic/hydrophobic switch

Surface modification using light is one of the most powerful methods for controlling the physical and chemical properties offunctionalized surfaces. In this paper, we report on systems where soft UV irradiation (lambda = 365 nm) converts a "low" activity fluorocarbon to a "high" activity amine-functionalized surface. An amine-functionalized SAM (self-assembled monolayer) is first masked using a tertiary amine catalyzed reaction with an N-hydroxysuccinimidyl carbonyl reagent. This mild, room-temperature reaction introduces a hydrophobic photocleavable nitrobenzyl "protecting group" terminated with a fluorocarbon end-chain. UV irradiation (lambda = 365 nm) of this hydrophobic/fluorocarbon surface cleaves the nitrobenzyl residue, returning the surface to the original hydrophilic/amine-functionalized state. This provides a mild, generic method of producing surfaces with hydrophilic/hydrophobic patterns or patterned with amine functional residues. Two different protecting groups, one terminated with a single and the other with three fluorocarbon end chains, are compared. In the case of the more bulky protecting group, only a small proportion of the amine residues react, but the surface is equally hydrophobic and the amine residues equally well shielded from further reaction. Surfaces are characterized by X-ray photoelectron spectroscopy, ellipsometry, surface potential, and contact angle measurements. Images of the photopatterned SAMs were obtained using scanning electron microscopy.     

Synthesis of size-controlled cobalt ferrite particles with high coercivity and squareness ratio

Cobalt ferrite particles with diameters ranging from a few micrometer to about 15 nm were synthesized using a modified oxidation process. The fine control of the particle size was achieved by introducing various concentrations of Fe(3+) ions at the beginning of the reaction. Among the particle sizes obtained by using this method, particles with a grain size of about 36 nm showed a magnetization (M(s)) of 64 emu/g and a maximum coercivity (H(c)) of 2020 Oe at room temperature. The corresponding squareness ratio was found to be 0.53.     

Structures and photovoltaic properties of copper oxides/fullerene solar cells

Copper oxide (CuO_x) thin films were produced by spin-coating and electrodeposition methods, and their microstructures and photovoltaic properties were investigated. Thin film solar cells based on the Cu₂O/C₆₀ and CuO/C₆₀ heterojunction or bulk heterojunction structures were fabricated on F-doped or In-doped SnO₂, which showed photovoltaic activity under air mass 1.5 simulated sunlight conditions. Microstructures of the CuO_x thin films were examined by X-ray diffraction and transmission electron microscopy, which indicated the presence of Cu₂O and CuO nanoparticles. The energy levels of the present solar cells were also discussed.     

Heat dissipation mechanism of magnetite nanoparticles in magnetic fluid hyperthermia

The relative contributions of Néel and Brownian relaxations on magnetic heat dissipation were studied by investigating the physical, magnetic and heating characteristics of magnetite nanoparticle suspensions with average diameters of 12.5 and 15.7 nm. Heating characteristics depended on the dispersion states of particles. The specific absorption rates (SAR) dropped by 27% for the 12.5 nm particles to 16.8×10⁻⁹ W g⁻¹ Oe⁻² Hz⁻¹ and by 67% for the 15.7 nm particles to 9.69×10⁻⁹ W g⁻¹ Oe⁻² Hz⁻¹, when the particle rotation was suppressed by dispersing magnetite nanoparticles in hydro-gel.     

Study of structural and electronic transport properties of Ce-doped LaMnO3

The structural and electronic transport properties of La_1−x Ce _x MnO₃ (x=0.0–1.0) have been studied. All the samples exhibit orthorhombic crystal symmetry and the unit cell volume decreases with Ce doping. They also make a metal-insulator transition (MIT) and transition temperature increases with increase in Ce concentration up to 50% doping. The system La_0.5Ce_0.5MnO₃ also exhibits MIT instead of charge-ordered state as observed in the hole doped systems of the same composition.