Close‐Packed Two‐Dimensional Silver Nanoparticle Arrays: Quadrupolar and Dipolar Surface Plasmon Resonance Coupling

Silver nanoparticles (NPs) ranging in size from 40 to 100 nm were prepared in high yield by using an improved seed‐mediated method. The homogeneous Ag NPs were used as building blocks for 2D assembled Ag NP arrays by using an oil/water interface. A close‐packed 2D array of Ag NPs was fabricated by using packing molecules (3‐mercaptopropyltrimethoxysilane) to control the interparticle spacing. The homogeneous 2D Ag NP array exhibited a strong quadrupolar cooperative plasmon mode resonance and a dipolar red‐shift relative to individual Ag NPs suspended in solution. A well‐arranged 2D Ag NP array was embedded in polydimethylsiloxane film and, with biaxial stretching to control the interparticle distance, concomitant variations of the quadrupolar and dipolar couplings were observed. As the interparticle distance increased, the intensity of the quadrupolar cooperative plasmon mode resonance decreased and dipolar coupling completely disappeared. The local electric field of the 2D Ag NP array was calculated by using finite difference time domain simulation and qualitatively showed agreement with the experimental measurements.     

Experimental analysis, modeling, and theoretical design of McMaster pore-filled nanofiltration membranes

A side-by-side comparison of the performance of McMaster pore-filled (MacPF) and commercial nanofiltration (NF) membranes is presented here. The single-salt and multi-component performance of these membranes is studied using experimental data and using a mathematical model. The pseudo two-dimensional model is based on the extended Nernst–Planck equation, a modified Poisson–Boltzmann equation, and hydrodynamic calculations. The model includes four structural properties of the membrane: pore radius, pure water permeability, surface charge density and the ratio of effective membrane thickness to water content. The analysis demonstrates that the rejection and transport mechanisms are the same in the commercial and MacPF membranes with different contributions from each type of mechanism (convection, diffusion and electromigration). Solute rejection in NF membranes is determined primarily by a combination of steric and electrostatic effects. The selectivity of MacPF membranes is primarily determined by electrostatic effects with a significantly smaller contribution of steric effects compared to commercial membranes. Hence, these membranes have the ability to reject ions while remaining highly permeable to low molecular weight organics. Additionally, a new theoretical membrane design approach is presented. This design procedure potentially offers the optimization of NF membrane performance by tailoring the membrane structure and operating variables to the specific process, simultaneously. The procedure is validated at the laboratory scale.     

Long-Range proton-proton coupling constants. I. Propanic coupling involving a methyl group 4JMeH

An equation is formulated on the basis of theoretical INDO/FPT calculations which describes the angular dependence of the propanic long-range coupling constant ⁴J_MeH in substituted HCCCH₃ fragments. This equation is a truncated Fourier series in the torsion angle ?, HCCMe, which takes into account the dependence of the Fourier coefficients on the bond angle θ, CCMe. The substituent effects are assumed to be additive. Some parameters in the equation may be obtained from the ⁴J_MeH couplings in propane and neopentane derivatives. The calculated effect upon ⁴J_MeH of changes in the bond angle θ is significant and it seems to be in part the cause of some effects which have been attributed to conformational dependence.     

Algorithmic analysis of theMAP/PH/1 retrial queue

In this paper the distribution of the maximum number of customers in a retrial orbit for a single server queue with Markovian arrival process and phase type services is studied. Efficient algorithm for computing the probability distribution and some interesting numerical examples are presented.     

Time reversal for infinite-dimensional diffusions

Summary In this paper we analize the reversibility of the diffusion property for the solution of certain infinite-dimensional systems of stochastic differential equations. Necessary and sufficient conditions ensuring this reversibility are given. The proofs use the techniques of the stochastic calculus of variations.This work was partly done when the first author was visiting the Centre de Recerca Matemàtica at Barcelona     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Effect of some organic solvents and acids on the laser-induced atomic fluorescence of tin in air-hydrogen flames

The effects of some organic solvents and acids on the atomic fluorescence of tin in air-hydrogen flames have been examined. Ketones and alcohols greatly reduced the florescence sensitivity in fuel rich air-hydrogen flame whereas organic acids generally enhanced the fluorescence signal. The depressive effect of organic solvents was found to be highly dependent on the fuel to oxidant ratio in the flame. An attempt has been made to explain these effects, on the basis of possible reactions occurring in the flame.On leave from Institute of Chemistry, University of the Punjab, Lahore 54590, PakistanOn leave from Department of Analytical Chemistry, University of Zaragoza, Zaragoza, Spain     

Application of molecular absorption properties of horseradish peroxidase for self-indicating enzymatic interactions and analytical methods

In this paper an in depth study is presented of the use of the horseradish peroxidase (HRP) enzyme as a self-indicating biorecognition reagent in UV-vis molecular absorption spectrometry. The HRP/H2O2 reaction mechanism in the absence of an external substrate has been clarified, and the interaction between HRP and glucose oxidase (GOx) has been studied. It has been demonstrated that GOx can act as a substrate of HRP; in both cases the kinetic constants have been obtained and mathematical models have been developed. Second, the HRP/H2O2 reaction is used to follow a H2O2-producing enzymatic reaction, the glucose reaction with GOx being used as a model. As an application of this, two methodologies have been proposed for glucose determination: with or without previous incubation of glucose with GOx. In both cases mathematical models relating HRP absorbance changes to glucose concentration have been developed and tested; both methods have been optimized, analytically characterized, and tested for glucose determination in samples. The methodology described could be applied to other heme-proteins and to other H2O2-producing enzymatic reactions. The models permit the reaction constants to be calculated. From the analytical chemistry point of view the models allow the prediction of the method sensitivity for other analytes involved in this type of reaction if the kinetic constants are known and can be used in the design of optical sensors.