Characterization of sulfate-reducing bacteria in yeast industry waste by microcalorimetry and PCR amplification

Sulfate-reducing bacteria (SRB) were isolated from anaerobic sludge of yeast factory wastewater treatment plant by cultivation on Postgate C medium. Microcalorimetry was used to monitor the anaerobic digestion processes and to measure the growth rates of sulfate-reducing bacteria. The maximum growth rates determined by microcalorimetry and ATP analysis were different—μ_max(dQ/dt) = 0.165 ± 0.008 h⁻¹ and μ_max(N_ATP) = 0.207 ± 0.013 h⁻¹. Experiments on the cultivation of SRB from yeast industry wastewater treatment plant in batch culture showed that during the first 20 h the concentration of sulfate decreased from 78.3 mM down to 62.2 mM while the increase of sulfide production was negligible. Perceptible amount of sulfide (7.82 mM) appeared on the 33.5 h of fermentation together with a peak on the power–time curve and considerable increase in the cell count (1.26 × 10⁹). First steps of sulfate metabolism (activation of sulfate by ATP sulfurylase, production of H₂) are accompanied by endothermic heat effects, therefore the values of thermal power remain moderate until the evolution of sulfide starts. The influence of green microalgae Chlorococcum sp. (preparation Biotreat 100) on the growth characteristics of microorganisms was also studied. Identification of one SRB strain was started by sequencing of PCR-amplified 16S rRNA gene. Two sets of primers were used for PCR amplification, both specific for domain Bacteria but giving different gene fragments. PCR-products were purified with JETQUICK kit according to the manufacturer instructions.     

Metal-catalyzed di-tert-butylsilylene transfer: synthesis and reactivity of silacyclopropanes

Metal-catalyzed di-tert-butylsilylene transfer was developed as a mild, operationally simple, functional-group-tolerant method for silacyclopropane formation. Di-tert-butylsilylene was transferred from cyclohexene silacyclopropane 1 to an alkene through the use of a metal salt. Silacyclopropanation occurred at temperatures as low as -27 degrees C when AgOTf or AgOC(O)CF(3) were used as catalysts. Complex silacyclopropanes were formed stereospecifically and diastereoselectively from functionalized alkenes. Silacyclopropanes reacted with various carbonyl compounds, including aldehydes, ketones, formate esters, and formamides, in an overall process that efficiently converts alkenes into oxasilacyclopentanes with defined stereochemistry.     

Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.     

Selective pervaporation of water through a nonselective microporous titania membrane by a dynamically induced molecular sieving mechanism

Pervaporation experiments were performed on microporous titania membranes using several binary liquids containing 2-20 wt % water. The membrane was nonselective in the separation of water from alcohols and p-dioxane but showed a remarkably high selectivity in the separation of water from ethylene glycol/water mixtures with < or =15 mol % water. The absence of selectivity under most conditions is explained by the large pore size (0.9 nm) of microporous titania. The high selectivity for water in the separation from ethylene glycol can be explained by the formation of a hydrogen-bonded network of ethylene glycol in the micropores, which blocks transport of ethylene glycol, while water can still permeate through. These networks are disrupted by water at higher concentrations, leading to full loss of membrane selectivity.     

Ultrasound-Assisted Water Extraction of Gentiopicroside,Isogentisin, and Polyphenols from Willow Gentian “Dust” Supported by Hydroxypropyl-β-Cyclodextrin as Cage Molecules

The residue after sieving (“dust”) from the willow gentian underground parts is an unexploited herbal tea by-product, although it contains valuable bioactive compounds. Cyclodextrins as efficient green co-solvents, cage molecules, and multifunctional excipients could improve the extraction and contribute to the added value of the resulting extracts. The objective of this study was to determine the optimal conditions for the extraction of gentiopicroside, isogentisin, and total phenolics (TPC) from willow gentian “dust” using ultrasound-assisted water extraction coupled with hydroxypropyl-β-cyclodextrin (HPβCD). The influence of extraction temperature (X₁: 20–80 °C), time (X₂: 20–50 min), and HPβCD concentration (X₃: 2–4% w/v) was analyzed employing the response surface methodology (RSM). The optimal extraction conditions for simultaneously maximizing the extraction yield of all monitored responses were X₁: 74.89 °C, X₂: 32.57 min, and X₃: 3.01% w/v. The experimentally obtained response values under these conditions (46.96 mg/g DW for gentiopicroside, 0.51 mg/g DW for isogentisin, and 12.99 mg GAE/g DW for TPC) were in close agreement with those predicted, thus confirming the suitability and good predictive accuracy of the developed RSM models. Overall, the developed extraction system could be an applicable alternative strategy to improve the extraction of bioactive compounds from the underutilized “dust” of willow gentian underground parts.     

Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

Lattice Boltzmann simulation of two-sided lid-driven flow in a staggered cavity

In this article, the lattice Boltzmann method is employed in order to explore incompressible fluid flow inside a two-sided lid-driven staggered cavity. Results of the lattice Boltzmann simulation for antiparallel motion of lids are compared with the data from existing literature. For parallel motion of lids, the characteristics of flow pattern for a variety of Re numbers (50–3200) are presented. An asymmetric steady-state flow pattern for parallel motion of lids is obtained.     

Degradation of azithromycin using Ti/RuO<Subscript>2</Subscript> anode as catalyst followed by DPV,HPLC–UV and MS analysis

The electrodegradation of azithromycin was studied by its indirect oxidation using dimensionally stable Ti/RuO₂ anode as catalyst in the electrolyte containing methanol, 0.05 M NaHCO₃, sodium chloride and deionized water. The optimal conditions for galvanostatic electrodegradation for the azithromycin concentration of 0.472 mg cm^?3 were found to be NaCl concentration of 7 mg cm^?3 and the applied current of 300 mA. The differential pulse voltammetry using glassy carbon electrode was performed for the first time in the above-mentioned content of electrolyte for the nine concentration of azithromycin (0.075–0.675 mg cm^?3) giving the limits of azithromycin detection and of quantification as: LOD 0.044 mg cm^?3 and LOQ 0.145 mg cm^?3. The calibration curve was constructed enabling the electrolyte analysis during its electrodegradation process. The electrolyte was analyzed by high-performance liquid chromatography and electrospray ionization time-of-flight mass spectrometry. The electrooxidation products were identified and after 180 min there was no azithromycin in the electrolyte while TOC analysis showed that 79% of azithromycin was mineralized. The proposed degradation scheme is presented.     

The conformation of epinephrine in polar solvents: an NMR study

Structural Chemistry - Epinephrine (Epi) is a physiologically important catecholamine. Molecular conformation of Epi controls the interactions with other molecules and its biological effects. There...