Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

The use of contact angle measurements to estimate the adhesion propensity of calcium carbonate to solid substrates in water

We have studied a series of solids using contact angle measurements; stainless steel, gold, aluminium, titanium nitride and PTFE that are frequently used in domestic water environments. It was found the influence of electron-donor (γ⁻) and electron-acceptor (γ⁺) free energies on material scaling rate was dominated by water wetting angles, providing materials exhibit an average roughness below 100 nm. The γ⁻ component had the greatest influence on theoretical adhesion, while γ^LW, (Lifshitz-van der Waals) γ⁺ and γ^AB (acid-base) had little effect. From the materials analysed, amorphous carbon coatings were least adhesive, while ‘kettle coating’ and highly roughened steel the most adhesive. The size and distribution of asperities also influenced the polar free energies and subsequent adhesion due to fluctuations in the wetting angle. The results obtained indicate works of adhesion can be used as a complementary technique with Lewis acid-base theory to deliver useful information about the propensity of scale to deposit on solids.     

Volume holographic data storage at an areal density of 250 gigapixels/in.(2)

One thousand volume holographic data pages, each containing 1x10(6)pixels , are stored in a common volume of LiNbO(3) :Fe by use of the 90 degrees geometry. An effective transverse aperture of 1.6 mm x 1.6mm , realized by repetition of this experiment at each of the eight surrounding locations, results in a demonstrated areal density of 394pixels/mum (2) (254 Gpixels/in. (2)) . Short-focal-length Fourier optics provide a tightly confined object beam at the crystal; the reference beam is angle multiplexed. Data pages retrieved with a 1024 x 1024 CCD camera are processed to remap bad spatial light modulator pixels and to compensate for global and local pixel misregistration and are then decoded with a strong 8-bits-from-12-pixels modulation code. The worst-case raw bit-error rate (BER) before error correction was 1.1x10(-3) , sufficient to deliver a user BER of 10(-12) at an overall code rate of 0.61 user bits per detector pixel. This result corresponds to 1.08% of the well-known theoretical volumetric density limit of 1/lambda(3) .     

Surface atomic imaging of La2CuO4 and superconducting Tl2Ba2Ca2Cu3O10

Surface structures of the high T_c oxide superconductors Tl₂Ba₂Ca₂Cu₃O₁₀ and La₂CuO₄ have been studied by high resolution electron microscopy. In addition to the single atomic layer of La on the (113) surface observed previously, several atomic layers of the C-form of La₂O₃ were found to coat the (001) surfaces of La₂CuO₄. Surface reconstruction with the incorporation of excess Ba on the (110) surface of Tl₂Ba₂Ca₂Cu₃O₁₀ has been observed together with a stepped (11l) surface produced by a combination of the (110) and (001) planes. The (001) surface of Tl₂Ba₂Ca₂Cu₃O₁₀ was also found to terminate with a Ba-O layer. Possible mechanisms for the formation of these surface structures are discussed.     

On Duality for a Class of Quasiconcave Multiplicative Programs

Multiplicative programs are a difficult class of nonconvex programs that have received increasing attention because of their many applications. However, given their nonconvex nature, few theoretical results are available. In this paper, we study a particular case of these programs which involves the maximization of a quasiconcave function over a linear constraint set. Using results from conjugate function theory and generalized geometric programming, we derive a complete duality theory. The results are further specialized to linear multiplicative programming.     

Measurement of the neutron electric form factor via recoil polarimetry

The ratio G _e ⁿ /G _m ⁿ of the electric to the magnetic form factor of the neutron has been measured by analyzing the polarization of the recoiling neutron in quasi-elastic scattering of longitudinally polarized electrons from deuterium at the Q ² values of 0.45, 1.15, and 1.47 (GeV/c)². The experiment has been performed in Hall C of the Thomas Jefferson National Accelerator Facility. With G _m ⁿ being known G _e ⁿ can be deduced. The preliminary results show that the lowest Q ² points follow the Galster parametrization and that the 1.47 (GeV/c)² point rises above this parametrization.Received: 30 September 2002, Published online: 22 October 2003PACS: 13.40.Gp Electromagnetic form factors - 14.20.Dh Protons and neutrons - 24.70. + s Polarization phenomena in reactions     

Electron spin lifetimes in Hg0.78Cd0.22 Te and InSb

We have made direct pump–probe measurements of spin lifetimes in long wavelength narrow-gap semiconductors at wavelengths between 4 and 10 μm and from 4 to 300 K. In particular, we measure remarkably long spin lifetimes, τ_s300 ps, even at 300 K for epilayers of degenerate n-type InSb. In this material the mobility is approximately constant between 77 and 300 K, and we find that τ_s is approximately constant in this temperature range. In order to determine the dominant spin relaxation mechanism we have investigated the temperature dependence of τ_s in non-degenerate lightly n-type Hg_0.78Cd_0.22Te of approximately the same band gap as InSb, and find that τ_s varies from 356 ps at 150 K to 24 ps at 300 K. Our results, both in magnitude and temperature dependence of τ_s, imply that the Elliott–Yafet model dominates in these materials.