Determination of chloroacetanilides, triazines and phenylureas and some of their metabolites in soils by pressurised liquid extraction, GC-MS/MS, LC-MS and LC-MS/MS

Pressurised liquid extraction (PLE) technique was used for the simultaneous extraction of phenylureas, triazines and chloroacetanilides and some of their metabolites from soils. Extractions were performed by mixing 15 g of dried soil with 30 mL of acetone under 100 atm at 50 degrees C, during 3 min and with three PLE cycles. Prior to the analysis of naturally contaminated soils, each of the five representative soil matrices used as blanks (of different depths) was spiked in triplicate with standards of each parent and degradation compound at about 10, 30 and 120 microg/kg. For each experiment, isoproturon-D6 and atrazine-D5 were used as surrogates. Analysis of phenylureas and metabolites of triazines and phenylureas was carried out by reversed phase liquid chromatography/mass spectrometry (LC-MS) and LC-MS/MS in the positive mode. Gas chromatography (GC)/ion trap mass spectrometry was used in the MS/MS mode for the parent triazines and chloroacetanilides. The average extraction recoveries were above 85%, except for didesmethyl-isoproturon, and quantification limits were between 0.5 and 5 microg/kg. The optimised multi-residue method was applied to soils and solids below the root zone, sampled from agricultural plots of a small French hydrogeological basin.     

Stability of organophosphorus insecticides on graphitized carbon black extraction cartridges used for large volumes of surface water

The stability of nine organophosphorus insecticides (azinphos-ethyl, azinphos-methyl, diazinon, EPN, ethion, fonofos, malathion, phosmet and parathion-methyl) was evaluated under a variety of storage conditions. Large volumes of surface water (4 l) were extracted using large-particle-size graphitized carbon black cartridges (Carbopack B 60-80 mesh). The effects of temperature, matrix type and drying of cartridges on the recovery of these contaminants, after different storage periods, were studied and compared to the conservation of surface water in bottles. After a 2-month period, all the chemicals stored on cartridges and kept at -20 degrees C remained stable, with recoveries ranging from 70 to 134%. By contrast, phosmet and EPN could no longer be recovered from the bottled surface water. Cartridges kept at -20 degrees C fared better than did those stored at 4 degrees C and 20 degrees C. The type of matrix water selected appears to have kept the target pesticides stored on cartridges from degrading, compared to the Milli-Q water, in which malathion and phosmet were unstable. The effect of the cartridges being either wet or dry made no difference in terms of improving the recovery of chemicals. After immediate surface water extraction, the most practical storage condition for the target insecticides was found to be storage on cartridges in the dark at -20 degrees C, with no drying or solvent washing of the Carbopack B material.     

Multi-Residue Analysis by Liquid Chromatography-Mass Spectrometry Coupling. Application to Drinking and River Waters

Abstract

The coupling between liquid chromatography and mass spectrometry with an APCI or ESI interface (in positive or negative mode) is used here for multi-residue analyses in natural waters, covering basic and neutral pesticides as well as acid pesticides. The methods developed are applied to drinking and, river waters after the samples are concentrated by liquid-liquid extraction or solid phase extraction on C18 cartridges. Comparisons are made between UV detection and mass spectrometry and between two chromatographic methods for acid substances. The quantitation limits range from 0.01 to 0.1 μg/l according to the substance.     

Azetidine‐Containing Alkaloids Produced by a Quorum‐Sensing Regulated Nonribosomal Peptide Synthetase Pathway in Pseudomonas aeruginosa

Pseudomonas aeruginosa displays an impressive metabolic versatility, which ensures its survival in diverse environments. Reported herein is the identification of rare azetidine‐containing alkaloids from P. aeruginosa PAO1, termed azetidomonamides, which are derived from a conserved, quorum‐sensing regulated nonribosomal peptide synthetase (NRPS) pathway. Biosynthesis of the azetidine motif has been elucidated by gene inactivation, feeding experiments, and biochemical characterization in vitro, which involves a new S‐adenosylmethionine‐dependent enzyme to produce azetidine 2‐carboxylic acid as an unusual building block of NRPS. The mutants of P. aeruginosa unable to produce azetidomonamides had an advantage in growth at high cell density in vitro and displayed rapid virulence in Galleria mellonella model, inferring functional roles of azetidomonamides in the host adaptation. This work opens the avenue to study the biological functions of azetidomonamides and related compounds in pathogenic and environmental bacteria.     

Total Synthesis and Structural Revision of the Antibiotic Tetrapeptide GE81112A

The total synthesis of the naturally occurring antibiotic GE81112A, a densely functionalized tetrapeptide, is reported. Comparison of spectral data with those of the natural product and the lack of biological activity of the synthesized compound led us to revise the published configuration of the 3‐hydroxypipecolic acid moiety. This hypothesis was fully validated by the synthesis of the corresponding epimer.     

Development of miniaturized pH biosensors based on electrosynthesized polymer films

A new type of pH biosensor was developed for biological applications. This biosensor was fabricated using silicon microsystem technology and consists in two platinum microelectrodes. The first microelectrode was coated by an electrosynthesized polymer and acted as the pH sensitive electrode when the second one was coated by a silver layer and was used as the reference electrode. Then, this potentiometric pH miniaturized biosensor based on electrosynthesized polypyrrole or electrosynthesized linear polyethylenimine films was tested. The potentiometric responses appeared reversible and linear to pH changes in the range from pH 4 to 9. More, the responses were fast (less than 1 min for all sensors), they were stable in time since PPy/PEI films were stable during more than 30 days, and no interference was observed. The influence of the polymer thickness was also studied.     

Observation of sodium gel-induced protein modifications in dodecylsulfate polyacrylamide gel electrophoresis and its implications for accurate molecular weight determination of gel-separated proteins by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectrometry (TOFMS) can potentially provide accurate molecular weight information of proteins separated by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). Several issues related to resolution and accuracy of molecular weight measurement are investigated by using a time-lag focusing MALDI-TOF mass spectrometer. The effects of the gel components SDS, glycerol, and tris buffer on the mass spectral signals are studied systematically. Glycerol and tris buffer are shown to have little or no effect on resolution and mass accuracy, whereas SDS degrades sensitivity, resolution, and mass accuracy even at low concentrations. A simple and fast gel extraction technique is presented which is capable of detecting proteins loaded at the low-picomole level on the gel. The sample preparation procedure used in this work appears to remove most of SDS from the gel, thereby reducing the peak broadening effect caused by SDS and resulting in high resolution and accurate measurement of proteins. However, for proteins containing cysteines, the molecular ions are composed of a distribution of acrylamide-protein adducts likely formed by reaction with unpolymerized acrylamide in the gel during the gel separation process. The implications of gel-induced protein modifications on the accurate molecular weight measurement of gel-separated proteins are discussed.     

Synthesis and antiviral evaluation of 2'-deoxy-2'-C-trifiuoromethyl beta-D-ribonucleoside analogues bearing the five naturally occurring nucleic acid bases

2'-Deoxy-2'-C-trifluoromethyl-beta-D-ribonucleoside derivatives bearing the five naturally occurring acid bases have been synthesized. All these derivatives were prepared by glycosylation reactions of purine and pyrimidine bases with a suitable peracylated 2-deoxy-2-C-trifluoromethyl sugar precursor to afford anomeric mixtures of protected nucleosides. After separation and deprotection, the resulting beta-nucleoside analogues were tested for their activity against HIV, HBV and several RNA viruses. However, none of these compounds showed significant antiviral activity nor cytotoxicity.     

Mise en évidence de CaF2e4O6 et détermination des structures cristallines des ferrites de calcium CaFe2+nO4+n(n = 1, 2, 3): nouvel exemple d'intercroissance

The synthesis of a new calcium ferrite CaFe₄O₆ has been carried out at 1125°C under a controlled atmosphere of H₂H₂O. The existence of this compound modifies a part of the diagram FeCaO. The crystal structures of the ferrites CaFe_2+nO_4+n (n = 1, 2, 3) have been resolved on a series of single crystals; these ferrites crystallize in the orthorhombic system, space group Cmcm, with the average parameters a = 3.04 Å, b = 10 Å, c = 10 + 2.65 nÅ. The three structures derive from each other through an intergrowth process, in the direction of the c axis, with CaFe₂O₄ blocks between the FeO blocks. The coordination of the iron atoms is slightly changed by the nature of the neighboring blocks during stacking.     

Speciation of butyl- and phenyltin compounds in sediments using pressurized liquid extraction and liquid chromatography-inductively coupled plasma mass spectrometry

A liquid chromatographic method with inductively coupled plasma mass spectrometry is proposed for the speciation of butyl- (monobutyltin, dibutyltin, tributyltin) and phenyl- (monophenyltin, diphenyltin, triphenyltin) tin compounds in sediments. After evaluation of different additives in the mobile phase, the use of 0.075% (w/v) of tropolone and 0.1% (v/v) of triethylamine in a mobile phase of methanol-acetic acid-water (72.5:6:21.5) allowed the best chromatographic separation of the six compounds. Pressurized liquid extraction (PLE) with a methanolic mixture of 0.5 M acetic acid and 0.2% (w/v) of tropolone was suitable for the quantitative extraction of butyl- and phenyltin compounds with recovery values ranging from 72 to 102%. This analytical approach was compared to conventional solvent extraction methods making use of acids and/or organic solvent of medium polarity. The main advantages of PLE over conventional solvent extraction are: (i) the possibility to extract quantitatively DPhT and MPhT from sediments, which could not be done by a solvent extraction approach; (ii) to preserve the structural integrity of the organotin compounds; (iii) to reduce the extraction time from several hours in case of solvent extraction techniques to just 30 min. For spiked sediments, limits of detection ranged from 0.7 to 2 ng/g of tin according to the compound. The relative standard deviations were found to be between 8 and 15%. The developed analytical procedure was validated using a reference material and was applied to various environmental samples.