Experimental and computational studies of trialkylaluminum and alkylaluminum chloride reactions with silica

Reactions of trimethylaluminum, triethylaluminum, and diethylaluminum chloride and ethylaluminum dichloride with silica gel have been studied experimentally by infrared spectroscopy and elemental analysis. The silica gel was subjected to different pretreatments to alter surface functionalities prior to reaction. In all cases the extent of surface modification reaction follows the trend unmodified > 600 degrees C pretreated > hexamethyldisilazane (HMDZ) pretreated > 600 degrees C/HMDZ pretreated. All of the aluminum compounds studied completely react non-hydrogen-bonded silanols, while also reacting with hydrogen-bonded silanols and siloxanes. Primarily monomeric surface species result from the surface modification reaction. Ethylaluminum chlorides preferentially react with silanols through cleavage of the Al-C bond rather than the Al-Cl bond. Singly bonded Si(s)-O-AlCl(2) surface species are readily synthesized by reaction of ethylaluminum dichloride with HMDZ-pretreated silica gel. Bridged bonded (Si(s)-O)(2)-AlCl surface species are readily synthesized by reaction of diethylaluminum chloride with HMDZ-pretreated silica gel. Computational ab initio studies of the cluster Si(4)O(6)(OH)(4) as a model to study the reaction of monomeric and dimeric methylaluminum dichloride with a silica silanol are also described. Comparison of the potential energy surface (PES) of monomer and dimer indicates that the energetics favor monomer reaction, consistent with experimental results. The energy cost in the dimer reaction is primarily from cleavage of a bridged Al-Cl bond upon adsorption. This does not occur when the monomer adsorbs. A comparison of the PES for the two reaction pathways resulting from cleavage of either an Al-Cl or Al-C bond indicates that while the former reaction is slightly kinetically favored (E(a) = 23.1 kJ/mol for Al-Cl bond cleavage versus E(a) = 31.1 kJ/mol for Al-C bond cleavage), the latter is strongly thermodynamically favored with an overall free energy difference between the two reaction pathways of 135 kJ/mol favorable to Al-C bond cleavage. These reactions are thermodynamically controlled.     

Some Physico-Chemical and Biological Properties of Triazeno Sugars

Replacement of the alkyl group of l-aryl-3-alkyltriazenes with a sugar moiety did not significantly modify their tautomeric behaviour. The same replacement done on 1-aryl-3-alkyl-3-methyl-triazenes did not affect to any large extent their rotameric properties. In contrast, the most prominent biological properties, anticancer activity and toxicity, of 1-aryl-3-methyltria-zenes disappeared on replacement of the methyl group with a sugar moiety. Unexpectedly, the N-acetyltriazene 15 was highly cyto-toxic.     

Groupes de départ inhabituels lors de cyclisations dans la série des quinoxalines,II [1]

Quinoxaline-3-ketones substituted by different groups in position 2 (I) are easily cyclized by hydroxylamine and phenylhydrazine to form isoxazolo[4, 5-b] quinoxalines (II) and pyrazolo [3, 4-b] quinoxalines (III) respectively. The reactions proceed via the oximes resp. phenylhydrazones. Groups displaced are not only the customary leaving groups of aromatic S_N2 reactions (halogens, OH), but likewise H, COOH, CONH₂, CO-Ar, and, less easily, benzyl groups; methyl and phenyl groups were not displaced. The displacement of hydride ion in the presence of excess of hydroxylamine resp. phenylhydrazine is explained in terms of an extension of the theory of osazone formation.     

Rhenium hydride/boron Lewis acid cocatalysis of alkene hydrogenations: activities comparable to those of precious metal systems

Dibromonitrosyl(dihydrogen)rhenium(I) complexes [ReBr(2)(NO)(PR(3))(2)(η(2)-H(2))] (1; R = iPr, a; Cy, b) and Me(2)NH·BH(3) (DMAB) catalyze at either 90 °C or ambient temperature under 10 bar of H(2) the hydrogenation of various terminal and cyclic alkenes (1-hexene, 1-octene, cyclooctene, styrene, 1,5-cyclooctadiene, 1,7-octadiene, α-methylstyrene). Maximum turnover frequency (TOF) values of 3.6 × 10(4) h(-1) at 90 °C and 1.7 × 10(4) h(-1) at 23 °C were achieved in the hydrogenation of 1-hexene. The extraordinary catalytic performance of the 1/DMAB system is attributed to the formation of five-coordinate rhenium(I) hydride complexes [Re(Br)(H)(NO)(PR(3))(2)] (2; R = iPr, a; Cy, b) and the action of the Lewis acid BH(3) originating from DMAB. The related 2/BH(3)·THF catalytic system also exhibits under the same conditions high activity in the hydrogenation of various alkenes with a maximum turnover number (TON) of 1.2 × 10(4) and a maximum TOF of 4.0 × 10(4) h(-1). For the hydrogenations of 1-hexene with 2a and 2b, the effect of the strength of the boron Lewis acid was studied, the acidity being in the following order: BCl(3) > BH(3) > BEt(3) ≈ BF(3) > B(C(6)F(5))(3) > BPh(3) ? B(OMe)(3). The order in catalytic activity was found to be B(C(6)F(5))(3) > BEt(3) ≈ BH(3)·THF > BPh(3) ? BF(3)·OEt(2) > B(OMe)(3) ? BCl(3). The stability of the catalytic systems was checked via TON vs time plots, which revealed the boron Lewis acids to cause an approximate inverse order with the Lewis acid strength: BPh(3) > BEt(3) ≈ BH(3)·THF > B(C(6)F(5))(3). For the 2a/BPh(3) system a maximum TON of 3.1 × 10(4) and for the 2a/B(C(6)F(5))(3) system a maximum TOF of 5.6 × 10(4) h(-1) were obtained in the hydrogenation of 1-hexene. On the basis of kinetic isotope effect determinations, H(2)/D(2) scrambling, halide exchange experiments, Lewis acid variations, and isomerization of terminal alkenes, an Osborn-type catalytic cycle is proposed with olefin before H(2) addition. The active rhenium(I) monohydride species is assumed to be formed via reversible bromide abstraction with the "cocatalytic" Lewis acid. Homogeneity of the hydrogenations was tested with filtration and mercury poisoning experiments. These "rhenium(I) hydride/boron Lewis acid" systems demonstrate catalytic activities comparable to those of Wilkinson- or Schrock-Osborn-type hydrogenations accomplished with precious metal catalysts.     

Deuteration of Water Enables Self‐Organization of Phospholipid‐Based Reverse Micelles

Phospholipid‐based reverse micelles are composed of branched cylinders. Their branching points are known to attract themselves and to slide along branches. The rate of this sliding is governed by the lifetime of H(D)‐bonded water bridges between phospholipid molecules. This lifetime is increased when the water is deuterated. On condition that the water contains at least 40 D atoms %, water/dipalmitoylphosphatidylcholine (DPPC)/deuterated pyridine reverse micelles with the composition 1.1:1:250 (v/v) have been shown to self‐organize into a liquid crystal in the 310–316 K temperature range. The mechanism of this self‐organization is unraveled by following the FTIR and ¹H NMR spectra of more concentrated micelles upon heating. During the preparation of micelles, pyridine‐(D⁺)H⁺ ions are formed. They give rise to hydron transfers, under the influence of the DPPC electric charges, evidenced by two broad FTIR absorptions above (BB1) and below (BB2) the ν(C? O) stretch. These hydron transfers occur along strong (D⁺)H⁺ bonds of pyridinium ions with pyridine (BB1) and DPPC C?O groups (BB2). The proton transfers at the interface of micelles, relayed in the continuous pyridine medium, create a tenuous link between separated micelles, thus facilitating their organization. Upon heating, DPPC heads shrink and DPPC chains expand to make wedge‐shaped DPPC molecules. The micelles then change in shape: cylinders constrict and enclosed water drifts towards branching points, which swell. Branching points of neighboring micelles come into contact. Due to the deuteration of water these contacts are prolonged and H bonds are formed between DPPC molecules located in each branching point. Upon storage at 39 °C, these branching points fuse. The lateral diffusion of DPPC molecules becomes free, as evidenced by a narrowing of all ¹H NMR resonances. Upon further heating, reorganization into a liquid crystal occurs.     

Amino-nucléosides. V. Amino-3′-didésoxy-3′, 5′-adénosine

A synthesis of 3′-amino-3′, 5′-dideoxyadenosine is described. This compound is not a substrate of adenosine deaminase.     

Therapeutic drug monitoring of cefepime with micellar electrokinetic capillary chromatography: Assay improvement,quality assurance,and impact on patient drug levels

The improvement and performance of a micellar electrokinetic capillary chromatography assay for cefepime in human serum and plasma with a 50 μm id fused‐silica capillary elongated from 40 to 60 cm is reported. Sample preparation with dodecylsulfate protein precipitation at pH 4.5, the pH 9.1 separation medium, and the applied voltage were as reported previously [16]. The change resulted in a significant lower current, higher resolution, and increased detection time intervals. The performance of the assay with multilevel internal calibration was assessed with calibration and control samples. Quality assurance data of a 2‐year period assessed under the new conditions demonstrated the robustness of the assay. In serum samples of patients who received both cefepime and sulfamethoxazole, cefepime could not be detected due to the inseparability of the two compounds. The presence of an interference can be recognized by an increased peak width (width > 0.2 min), the appearance of a shoulder or an unresolved double peak. The patient data gathered during a 3‐year period reveal that introduction of therapeutic drug monitoring led to a 50% reduction of the median drug level. The data suggest that therapeutic drug monitoring can help to minimize the risk of major adverse reactions and to increase drug safety on an individual basis.     

Capillary zone electrophoresis determination of carbohydrate-deficient transferrin using the new CEofix reagents under high-resolution conditions

Capillary zone electrophoresis (CZE) with a dynamic double coating based on the new CEofix reagents is shown to provide high-resolution separations of serum transferrin (Tf) isoforms, a prerequisite for the monitoring of unusual and complex Tf patterns, including those seen with genetic variants and disorders of glycosylation. A 50 microm I.D. fused-silica capillary of 60 cm total length, an applied voltage of 20 kV and a capillary temperature of 30 degrees C results in 15 min CZE runs of high assay precision and thus provides a robust approach for the determination of carbohydrate-deficient transferrin (CDT, sum of asialo-Tf and disialo-Tf in relation to total Tf) in human serum. Except for selected samples of patients with severe liver diseases and sera with high levels of paraproteins, interference-free Tf patterns are detected. Compared with the use of the previous CEofix reagents for CDT under the same instrumental conditions, the resolution between disialo-Tf and trisialo-Tf is significantly higher (1.7 versus 1.4). The CDT levels of reference and patient sera are comparable, suggesting that the new assay can be applied for screening and confirmation analyses. The high-resolution CZE assay represents an attractive alternative to HPLC and can be regarded as a candidate of a reference method for CDT.     

Transferrin immunoextraction for determination of carbohydrate‐deficient transferrin in human serum by capillary zone electrophoresis

CZE‐based assays for carbohydrate‐deficient transferrin (CDT) in which serum is mixed with an Fe(III) ion‐containing solution prior to analysis are effective approaches for the determination of CDT in patient samples. Sera of patients with progressed diseases, however, are prone to interferences comigrating with transferrin (Tf) that prevent the proper determination of CDT by CZE in these samples. The need of a simple and economic approach to immunoextract Tf from human serum prompted us to investigate the use of a laboratory‐made anti‐Tf spin column containing polyclonal rabbit anti‐human Tf antibodies linked to Sepharose 4 Fast Flow beads. This article reports extraction column manufacturing and column characterization with sera having normal and elevated CDT levels. The developed procedure was applied to a number of relevant hepatology and dialysis patient samples and could thereby be shown to represent an effective method for extraction and concentration of all Tf isoforms. Furthermore, lipemic sera were delipidated using a mixture of diisopropyl ether and butanol prior to immunoextraction. CDT could unambiguously be determined in all pretreated samples.