New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Electron spin resonance study of γ-irradiated poly(acrylic acid)

Electron spin resonance (ESR) spectra of poly(acrylic acid) (PAA) γ-irradiated in air at room temperature and recorded at room temperature and at liquid-nitrogen temperature have been studied to identify the radiation products. The ESR spectra are composed of eight lines with hyperfine splittings of 23 ± 1 G and 11 ± 1 G. The method of least-squares total curve fitting, employing the Lorentzian line shape function, to the observed spectra enabled the assignment of the spectra. Computed spectra obtained by the superposition of a singlet and the spectra due to chain radicals are considered to give the best fits to the observed ESR spectra. The singlet is assigned to the radicals COOH, and the component 10-line spectra are assigned to the chain radicals CH₃? CH? CH₂ ～ and/or ～ CH₂? CH? CH₂ ～. The observed change in line shape with temperature of the ESR spectra is attributed to the hindered oscillations of the methyl groups about the C_α? C_β bond axis of the chain radicals. The existence of the methyl groups is confirmed by the measurement of infrared absorption.     

Montmorillonite KSF-catalyzed one-pot synthesis of hexahydro-1H-pyrrolo[3,2-c]quinoline derivatives

Aryl amines react with endocyclic ene-carbamates such as tert-butyl 2,3-dihydro-1H-1-pyrrolecarboxylate and tert-butyl 1,2,3,4-tetrahydro-1-pyridinecarboxylate, on the surface of montmorillonite KSF clay under mild conditions to afford the corresponding 3-aminopropylhexahydropyrrolo[3,2-c]quinoline or 4-aminobutyloctahydrobenzo[h][1,6]naphthyridine derivatives in excellent yields with moderate diastereoselectivity.     

X-ray fluorescence in some rare earth and high Z elements excited by 661.6 keV γ-rays

The K-shell X-ray fluorescence cross sections are determined experimentally for 10 elements such as Pb, Hg, Ir, W, Lu, Tm, Dy, Tb, Gd and Nd at excitation energy of 661.6 keV associated with γ-rays of ¹³⁷Cs radioisotope. The technique employed involves the measurement of total intensity of fluorescent K X-rays that follow the photoeffect absorption of a known flux of γ-rays using a well type Nal(Tl) detector. The obtained results are compared with the available theoretical values and other measured values.     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006     

129I in soil and grass samples around a nuclear reprocessing plant

Neutron activation analysis was used to determine¹²⁹I in soil and grass samples around a reprocessing plant. The method involved wet oxidation of samples, using chromic acid, followed by distillation, collection of iodine in alkaline solution, loading on Dowex-1, irradiation and post-irradiation purification steps. The -activity of¹³⁰I isotope of the purified samples was measured for quantitative determination of¹²⁹I. The experimental results showed that¹²⁹I and the¹²⁹I/¹²⁷I atomic ratio in soil samples varied from 1.09×10^–4 to 5.33×10^–3 pCi g^–1 and 0.10×10^–6 to 6.12×10^–6, respectively. Further, the geometric mean of soil-to-plant transfer factor (Bv) for¹²⁹I was found to be 0.16 which was comparable with other published values.     

Excess enthalpies for mixtures of cyclohexanone with isomeric propanols and butanols at 298.15 K

Excess enthalpies (H ^E ) for mixtures of cyclohexanone with propan-1-ol. propan-2-ol, butan-1-ol, butan-2-ol and 2-methyl propan-1-ol at 298.15 K have been measured over the entire composition range. All mixed endothermically with the maximum values ofH ^E occurring at equimole fraction. Comments about the molecular interactions contributing to the excess enthalpies of a cyclic ketone + an alcohol are made on the basis of these results.     

An indirect method for the spectrofluorimetric determination of trace amounts of germanium after extraction as an ion association complex with rhodamine B in the presence of chromotropic acid

A highly sensitive and selective spectrofluorimetric method for the determination of 0.05-2.00 mug germanium is described. Germanium is treated with chromotropic acid at pH 2.5 and the resultant anionic complex is extracted as an ion pair with rhodamine into toluene. Addition of butanol to the organic extract releases the fluorescent dye and facilitates its measurement at 570 nm after exciting at 540 nm. The method provides a detection limit of 0.003 mug ml(-1) and is virtually free from interference from extraneous ions. The relative standard deviaiton is 2.9% for ten determinations of 1.0 mug germanium. The method has been applied to the determination of germanium in various ores, minerals and rock samples.