3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Catalytic partial oxidation of methane using RhSr- and Ni-substituted hexaaluminates

This paper reports the results of experimental and modeling efforts to characterize partial oxidation of methane to produce synthesis gas (H₂ and CO) using metal-substituted hexaaluminate catalysts in short-contact-time reactors. Hexaaluminate catalysts offer excellent high-temperature stability compared to the equivalent metal-based catalysts. The hexaaluminates are synthesized by a metal-exchange process using alumoxane precursors that enable a wide range of metal substitutions. Of all the combinations tested, RhSr-substituted hexaaluminates yielded the best performance. The catalysts are supported on alumina porous-foam structures, which are positioned within a tube furnace to control the operating temperature. Two-stage combinations of RhSr- and Ni-substituted hexaaluminates are shown to improve conversion activity and selectivity compared to a single-catalyst system.     

Polynomial operator matrices as generators: The general case

Of concern are systems of linear evolution equations

MECHANISM OF PHOTOOXYGENATION OF THE CD (II) COMPLEX OF PYROPHEOPHORBIDE A METHYL ESTER

Photooxygenation of (pyropheophorbidato a methyl ester)cadmium (II) was studied using ^18,18O₂ labeling of the molecular oxygen required for cleavage of the macrocycle. After reductive demetallation of the primary oxidation product (4,5-dioxo-4,5-secopyropheophorbidato a methyl ester)cadmium (II), the isotope content of formylbilinone 4a was analyzed by repeated-scan fast atom bombardment mass spectrometry. Comparison of the spectroscopic data of the labeled pigment 4a with the statistical probabilities of¹⁸ O isotope incorporation calculated for four possible reaction mechanisms clearly proves that photooxidative ring cleavage occurred by the one-molecule mechanism, i.e. the terminal oxygen atoms of 4a were derived from one oxygen molecule. Furthermore, a study of the exchange of the¹⁸ O-labeled atoms revealed that no exchange occurs within the pH 4.5–9.5 range. In stronger alkaline or acidic solutions, only the oxygen atom of the formyl group is exchanged. Hydrolysis of the methyl ester group of 4a was achieved, without loss of the¹⁸ O label on the formyl group, at pH 7.2 in the presence of pig liver esterase.     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Adsorption of bovine alpha-lactalbumin on suspended solid nanospheres and its subsequent displacement studied by NMR spectroscopy

Detailed knowledge of the adsorption-induced conformational changes of proteins is essential to understand the process of protein adsorption. However, not much information about these conformational changes is available. Here, the adsorption of calcium-depleted (APO)- and calcium-containing (HOLO)-bovine alpha-lactalbumin (BLA) on suspended solid polystyrene nanospheres and their subsequent displacement by a surfactant are studied by NMR spectroscopy. To our knowledge, this is the first time that adsorption of proteins on solid nanospheres, with both components present in the NMR sample, is studied by this method. High-quality one-dimensional and two-dimensional 1H NMR spectra of nonadsorbed APO- and HOLO-BLA in the presence of BLA- and/or surfactant-covered solid polystyrene nanospheres in suspension are obtained using standard NMR procedures. BLA and surfactant molecules that are adsorbed on the polystyrene nanospheres give rise to extremely broadened proton resonances. This can be exploited to determine the amount of adsorbed protein and of adsorbed surfactant in a system containing protein, nanospheres, and surfactant, without disturbing the equilibrium of the system. Two-dimensional 1H NMR spectroscopy shows that the chemical shifts of the backbone amide protons of HOLO-BLA after its adsorption and subsequent displacement from polystyrene nanospheres by the surfactant 3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate (CHAPS) are identical to those of native HOLO-BLA. The adsorption-induced unfolding of BLA to a molten globule state on polystyrene nanospheres is thus fully reversible at the residue level upon CHAPS-induced displacement of BLA. The latter is the now fulfilled essential requirement that enables the future indirect study, at the residue level, of the conformational characteristics of BLA adsorbed on polystyrene nanospheres by hydrogen/deuterium exchange and NMR spectroscopy. The results presented show that NMR spectroscopy is clearly feasible to study the adsorption of BLA on suspended polystyrene nanospheres. This technique should be applicable to the study of the adsorption of other proteins on other surfaces as well.     

Kinetics of cooperative conformational transitions of lineal biopolymers

Cooperative conformational transitions of proteins and nucleic acids are of decisive importance to many processes of molecular biology, and particularly to their regulation. They proceed via numerous interdependent elementary processes, and their kinetics are therefore often complicated. They are frequently also very fast. However, kinetic analyses can be carried out by chemical relaxation methods. The theoretical interpretation is comparatively simple in the case of linear biopolymers. When the linear Ising model extended for kinetics was applied to model peptides and polynucleotides, it provided an insight into the fundamental principles of cooperative transformations.