A model for noise processes in semiconductor laser amplifiers, part 1: the travelling-wave semiconductor laser amplifier

A new model for the noise processes in a travelling-wave semiconductor laser amplifier is presented. This model is based on applying perturbation techniques to the basic travelling-wave rate equations to deduce the noise rate equations. These equations are then used to calculate the power spectral densities of the intensity, electron density and phase noises introduced into a single signal mode propagating through the amplifier. The model can be applied to any gain profile within the amplifier, ranging from unsaturated to completely saturated. Furthermore, in contrast to most other semiconductor laser amplifier models, this model does not require the homogenization of the photon field over the length of the device.     

Non empirical quantum mechanical calculations of the1H,13C,15N and17O magnetic shielding constants and of the spin-spin coupling constants in formamide,hydrated formamide and N-methylformamide

The magnetic shielding constants of the different atoms of formamide, hydrated formamide and N-methylformamide are calculated by anab initio method. For the protons of formamide the measured differences between their chemical shifts are correctly reproduced by theory, provided that the molecular geometry used as input is carefully chosen. The differences between the values of the magnetic shielding constants calculated for formamide and hydrated formamide show that intermolecular hydrogen bonding produces variations of chemical shifts for all the atoms of the molecule except the formyl proton. The calculated chemical shift variations between formamide and N-methylformamide are compared to the experimental values and discussed in relation with different hydrogen bonding possibilities of the two molecules. The calculation of the contact term of the spin-spin coupling constants of formamide and hydrated formamide shows that in most cases the measured trends are satisfactorily reproduced and that the variations of these terms upon hydration are less than 3%.     

Thallium-205 NMR spectroscopy. Solvation of the thallous ion in dilute aqueous-amide and amide-amide binary solvent systems of formamide,N-methylformamide,andN-ethylformamide

Solvation of the thallous ion in dilute solutions of six binary solvent systems (formamide/water,N-methylformamide/water,N-ethylformamide/water, formamide/N-methylformamide, formamide/N-ethylformamide, andN-methylformamide/N-ethylformamide) was studied with²⁰⁵Tl NMR spectroscopy. An attempt was made to separate solvation effects related to the electrondonating ability (Lewis basicity) of the solvents from effects resulting from structural changes in the solvation sphere. Structural effects were found to be greatest in theN-methylformamide/water system and least in theN-methylformamide/formamide system.     

Interfacial synthesis of bisphenol A tetrachlorocyclotriphosphazene from bisphenol A and hexachlorocyclotriphosphazene

The effect of solvent purity on the synthesis and yield of bisphenol A tetrachlorocyclotriphosphazene (BATCCP) has not been described in the literature. The purpose of this research was to synthesize BATCCP hybrid monomers and to evaluate the effect of solvent purity on the BATCCP production. BATCCP monomers were prepared by an interfacial procedure in a water/toluene system as a function of time with the assistance of a phase transfer catalyst, tetraoctylammonium bromide. ¹H and ³¹P NMR confirmed the production of BATCCP monomer by the appearance of chemical shifts at 7.18 and 5.35 ppm in the ¹H NMR and 23.4 and 13.9 ppm in the ³¹P NMR, respectively. Distillation of the toluene, not suggested in previous reports of HCCP hybrid synthesis, resulted in an improvement of actual % yield to 40% and stability of the product throughout the 1440 min reaction as confirmed by MALDI, compared with an 11% actual yield at 15 min, decaying to 2% over a 1440 min reaction when the synthesis was performed with ‘anhydrous toluene’ as provided commercially without further distillation.     

Combined OX40 Agonist and PD-1 Inhibitor Immunotherapy Improves the Efficacy of Vascular Targeted Photodynamic Therapy in a Urothelial Tumor Model

Purpose: Vascular targeted photodynamic therapy (VTP) is a nonsurgical tumor ablation approach used to treat early-stage prostate cancer and may also be effective for upper tract urothelial cancer (UTUC) based on preclinical data. Toward increasing response rates to VTP, we evaluated its efficacy in combination with concurrent PD-1 inhibitor/OX40 agonist immunotherapy in a urothelial tumor-bearing model. Experimental design: In mice allografted with MB-49 UTUC cells, we compared the effects of combined VTP with PD-1 inhibitor/OX40 agonist with those of the component treatments on tumor growth, survival, lung metastasis, and antitumor immune responses. Results: The combination of VTP with both PD-1 inhibitor and OX40 agonist inhibited tumor growth and prolonged survival to a greater degree than VTP with either immunotherapeutic individually. These effects result from increased tumor infiltration and intratumoral proliferation of cytotoxic and helper T cells, depletion of Treg cells, and suppression of myeloid-derived suppressor cells. Conclusions: Our findings suggest that VTP synergizes with PD-1 blockade and OX40 agonist to promote strong antitumor immune responses, yielding therapeutic efficacy in an animal model of urothelial cancer.     

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Statistical Optimization for Succinic Acid Production from E. Coli in a Cost-Effective Medium

Response surface methodology (RSM) was employed for optimization of medium components and cultural parameters in cost effective cane molasses based medium for attaining high yield of succinic acid. The important factors obtained by “one-variable-at-a-time-approach” (cane molasses, corn steep liquor, sodium carbonate, and inoculum density) were further optimized by RSM. The optimum values of the parameters obtained through RSM (cane molasses 12.5%, corn steep liquor 7.5%, and sodium carbonate 25 mM) led to almost double yield of succinic acid (15.2 g/l in 36 h) as against “one-variable-at-a-time-approach” (7.1 g/l in 36 h) in 500-ml anaerobic bottles containing 300-ml cane molasses based medium. Subsequently, in 10-l bioreactor succinic acid production from Escherichia coli was further improved to 26.2 g/l in 30 h under conditions optimized through RSM. This fermentation-derived succinic acid will definitely help in replacing existing environmentally hazardous and cost-intensive chemical methods for the production of succinic acid.     

A CRITICAL STUDY ON THE INTERACTIONS OF HESPERITIN WITH HUMAN HEMOGLOBIN: FLUORESCENCE SPECTROSCOPIC AND MOLECULAR MODELING APPROACH

Hesperitin, a ubiquitous bioactive flavonoid abundant in citrus fruits is known to possess antioxidant, anti-carcinogenic, hypolipidemic, vasoprotective and other important therapeutic properties. Here we have explored the interactions of hesperitin with normal human hemoglobin (HbA), using steady state and time resolved fluorescence spectroscopy, far UV circular dicroism (CD) spectroscopy, combined with molecular modeling computations. Specific interaction of the flavonoid with HbA is confirmed from flavonoid-induced static quenching which is evident from steady state fluorescence as well as lifetime data. Both temperature dependent fluorescence measurements and molecular docking studies reveal that apart from hydrogen bonding and van der Waals interactions, electrostatic interactions also play crucial role in hesperitin-HbA interactions. Furthermore, electrostatic surface potential calculations indicate that the hesperitin binding site in HbA is intensely positive due to the presence of several lysine and histidine residues.     

Elevated uptake of Th and U by netted chain fern (<Emphasis Type="Italic">Woodwardia areolata</Emphasis>)

We assessed the ability of netted chain fern (Woodwardia areolata) to uptake U and Th from wetland soils on the U.S. Department of Energy’s Savannah River Site in South Carolina. Netted chain fern had the highest Th and U concentrations of all plants collected from the wetland. Ferns grown in contaminated soil (329 mg·kg⁻¹ Th, 44 mg·kg⁻¹ U) in a greenhouse contained 6.4 mg·kg⁻¹ Th and 5.3 mg·kg⁻¹ U compared with 0.13 mg·kg⁻¹ Th and 0.035 mg·kg⁻¹ U in Bermuda grass (Cynodon dactylon). Netted chain fern has potential for the phytoremediation of soils contaminated with Th and U.