An improved method for quantitative sugar analysis of glycoproteins

Although there are numerous methods available to hydrolyze glycans utilizing strong acids, it all requires lengthy steps to obtain quantitative yield. We have developed a new simple one-step method for analysis of amino and neutral monosaccharides of glycoproteins quantitatively. Free monosaccharides were found to be stable during hydrolysis of glycans with 6 N HCI at 80 degrees C up to 2 h. Using this condition, analysis of free monosaccharides hydrolyzed from the bovine fetuin showed sugar composition of Gal: Man: GlcN: GaIN = 13.2: 11.0: 15.5: 2.6, which is closely matched with the reported value of 12.4: 9.6: 17.2: 2.7 (Townsend et al., ABRF News 8: 14, 1997). This method was shown to be applicable to varieties of well-characterized glycoproteins, erythropoietin, fibrinogen and soybean agglutinin. The amounts of sugars released under the condition were very close to the experimental values by other procedures or to the theoretical ones. This condition was found to be suitable for direct sugar analysis of fetuin, which have been immobilized onto polyvinylidene difluoride membrane. Based on these results, it support that the 6 N HCl/80 degrees C/2 h is the simplest method for quantitative analysis of monosaccharide composition of glycoproteins.     

Biomedical significance of endothelial cell specific growth factor, angiopoietin

Until recently, vascular endothelial growth factor (VEGF) was the only growth factor proven to be specific and critical for blood vessel formation. Other long-known factors, such as the fibroblast growth factors (FGFs), platelet-derived growth factor, or transforming growth factor-beta, had profound effects in endothelial cells. But such factors were nonspecific, in that they could act on many other cells, and it seemed unlikely that these growth factors would be effective targets for treatment of endothelial cell diseases. A recently discovered endothelial cell specific growth factor, angiopoietin, has greatly contributed to our understanding of the development, physiology, and pathology of endothelial cells (Davis et al., 1996; Yancopoulos et al., 2000). The recent studies that identified and characterized the physiological and pathological roles of angiopoietin have allowed us to widen and deepen our knowledge about blood vessel formation and vascular endothelial function. Therefore, in this review, we describe the biomedical significance of these endothelial cell growth factors, the angiopoietins, in the vascular system under normal and pathological states.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Hispidulin Ameliorates Endotoxin-Induced Acute Kidney Injury in Mice

Lipopolysaccharide (LPS) is an endotoxin that plays a crucial role in septic acute kidney injury (AKI). Hispidulin is a natural flavonoid that possesses various biological activities. Recent studies have shown that hispidulin administration alleviates various inflammatory diseases in animal models. This study aimed to investigate the renoprotective effect of hispidulin on LPS-induced AKI. Male C57BL/6 mice were administered LPS (10 mg/kg) with or without hispidulin (50 mg/kg). Hispidulin administration attenuated renal dysfunction, histological alterations, and the upregulation of neutrophil gelatinase-associated lipocalin. This flavonoid also reduced cytokine production and Toll-like receptor 4 expression, inhibited nuclear factor-κB and mitogen-activated protein kinase cascades, and alleviated immune cell infiltration. The oxidation of lipids and DNA was also inhibited by hispidulin administration. This antioxidant effect of hispidulin was associated with the downregulation of NADPH oxidase 4, the activation of catalase and superoxide dismutase activities, and the restoration of glutathione levels. Moreover, hispidulin administration attenuated tubular cell apoptosis by inhibiting caspase-3 pathway. These data suggest that hispidulin ameliorates endotoxin-induced kidney injury by suppressing inflammation, oxidative stress, and tubular cell death.     

Observation of insulating–insulating monoclinic structural transition in macro‐sized VO2 single crystals [Phys. Status Solidi RRL 5, No. 3, R107–R109 (2011)]

In our article, we reported the observation of monoclinic M2 to M1 structural phase transition in VO₂ single crystal near the temperature of ～49 °C. However, the re‐examination of Laue patterns reveals that previously defined monoclinic M1 and M2 phases can be interpreted as monoclinic M2 and triclinic T phases instead. Careful experimental geometry calibration and further refinement of the lattice parameter ratios and angles show that monoclinic M2 and triclinic T phases fit better with the experimental data. On the other hand, our previous misidentification of the insulating phases does NOT affect the conclusions of our article. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Loss-coupled distributed-feedback lasers with amplified optical feedback for optical microwave generation

Multisection semiconductor lasers for optical microwave generation have been fabricated that consist of a loss-coupled distributed feedback (LC-DFB), a phase control, and an amplifier section. High-frequency self-pulsations are generated according to the concept of a single-mode laser with short optical feedback. The effect of the optical feedback via the phase control and the amplifier section on the self-pulsation is apparently shown as a result of the superior single-mode characteristic of the LC-DFB section. Continuous frequency tuning is achieved in the range of 17-35 GHz.     

Bandgap engineering of self-assembled InAs quantum dots with a thin AlAs barrier

We investigate the effects of a thin AlAs layer with different position and thickness on the optical properties of InAs quantum dots (QDs) by using transmission electron microscopy and photoluminescence (PL). The energy level shift of InAs QD samples is observed by introducing the thin AlAs layer without any significant loss of the QD qualities. The emission peak from InAs QDs directly grown on the 4 monolayer (ML) AlAs layer is blueshifted from that of reference sample by 219 meV with a little increase in FWHM from 42–47 meV for ground state. In contrast, InAs QDs grown under the 4 ML AlAs layer have PL peak a little redshifted to lower energy by 17 meV. This result is related to the interdiffusion of Al atom at the InAs QDs caused by the annealing effect during growing of InAs QDs on AlAs layer.     

Antireflective properties of AZO subwavelength gratings patterned by holographic lithography

We fabricate the aluminum-doped zinc oxide (AZO) subwavelength gratings (SWG) on Si and glass substrates by holographic lithography and sequent CH₄/H₂/Ar reactive ion etching process. The etch selectivity of AZO over photoresist mask as well as the nano-scale shape is optimized for better antireflection performance. To analyze the antireflective properties of AZO SWG surface, the optical reflectivity is measured and then calculated together with a rigorous coupled-wave analysis. The reflectance spectrum can be considerably changed by incorporating the SWG into AZO film. As the SWG height of AZO on Si substrate increases, the magnitude of interference oscillations in the reflectance spectrum tends to be reduced with the larger difference between its maxima. The use of optimized SWG can significantly reduce the surface reflection of AZO film at the desired wavelengths. The measured reflectance data of AZO SWG are reasonably consistent with the simulation results. No considerable change in transmission characteristics is observed for AZO SWG structures.     

Characterization of fish schooling behavior with different numbers of Medaka (Oryzias latipes) and goldfish (Carassius auratus) using a Hidden Markov Model

Fish that swim in schools benefit from increased vigilance, and improved predator recognition and assessment. Fish school size varies according to species and environmental conditions. In this study, we present a Hidden Markov Model (HMM) that we use to characterize fish schooling behavior in different sized schools, and explore how school size affects schooling behavior. We recorded the schooling behavior of Medaka (Oryzias latipes) and goldfish (Carassius auratus  ) using different numbers of individual fish (10–40), in a circular aquarium. Eight to ten 3 s video clips were extracted from the recordings for each group size. Schooling behavior was characterized by three variables: linear speed, angular speed, and Pearson coefficient. The values of the variables were categorized into two events each for linear and angular speed (high and low), and three events for the Pearson coefficient (high, medium, and low). Schooling behavior was then described as a sequence of 12 events (2×2×3$2\times 2\times 3$), which was input to an HMM as data for training the model. Comparisons of model output with observations of actual schooling behavior demonstrated that the HMM was successful in characterizing fish schooling behavior. We briefly discuss possible applications of the HMM for recognition of fish species in a school, and for developing bio-monitoring systems to determine water quality.     

Angle-resolved photoemission spectroscopy of electron-doped cuprate superconductors: isotropic electron-phonon coupling

We have performed high resolution angle-resolved photoemission (ARPES) studies on electron-doped cuprate superconductors Sm2-xCexCuO4 (x=0.10, 0.15, 0.18), Nd2-xCexCuO4 (x=0.15), and Eu2-xCexCuO4 (x=0.15). Imaginary parts of the electron removal self energy show steplike features due to an electron-bosonic mode coupling. The steplike feature is seen along both nodal and antinodal directions but at energies of 50 and 70 meV, respectively, independent of the doping and rare earth element. Such energy scales can be understood as being due to preferential coupling to half- and full-breathing mode phonons, revealing the phononic origin of the kink structures. Estimated electron-phonon coupling constant lambda from the self energy is roughly independent of the doping and momentum. The isotropic nature of lambda is discussed in comparison with the hole-doped case where a strong anisotropy exists.