Reversed migration micellar electrokinetic chromatography with off-line and on-line concentration analysis of phenylurea herbicides

Three environmentally important phenylurea herbicides (monuron, isoproturon, diuron) were separated in reversed migration micellar electrokinetic chromatography (RM-MEKC) using 50 mM sodium dodecyl sulfate, 50 mM phosphoric acid, and 15 mM gamma-cyclodextrin. Three on-line concentration techniques are then evaluated to increase the detection sensitivity of the RM-MEKC system. Stacking with reverse migrating micelles (SRMM, water as the sample solvent) provided the best results among the focusing techniques studied. Using a z-shaped detection cell, more than 500-fold increase in peak height is obtained. As a sample preparation and off-line concentration method, solid-phase extraction (SPE) that further improved detection sensitivity was used in the analysis of spiked tap and pond water. For example, 1 parts per billion of each herbicide spiked in tap or pond water was detected by MEKC after SPE and SRMM.     

Photopolymerized sol-gel frits for packed columns in capillary electrochromatography

Porous sol-gel frits are fabricated in a capillary column by filling it with a solution of 3-(trimethoxysilyl)propyl methacrylate, hydrochloric acid, water, toluene (porogen), and a photoinitiator (Irgacure 1800) and exposing it to UV light at 365 nm for 5 min. The separation column (30 cm x 75 microm I.D.) contains between the inlet and outlet frits a 15-cm packed segment filled with 5-microm silica particles modified with the chiral compound (S)-N-3,5-dinitrobenzoyl-1-naphthylglycine. A detection window (1 mm long) is placed immediately after the outlet frit. To demonstrate the performance of this chiral separation column, mixtures of 16 different amino acids (three of which are not naturally occurring) derivatized with the fluorogenic reagent 4-fluoro-7-nitro-2,1,3-benzoxadiazole were separated by capillary chromatography. The enantiomeric separation of the column results in a resolution ranging from 1.21 to 8.29, and a plate height ranging from 8.7 to 39 microm.     

Chiral separation using cyclodextrins as mobile phase additives in open-tubular liquid chromatography with a pseudophase coating

The chiral separation of various analytes (dichlorprop, mecoprop, ibuprofen, and ketoprofen) was demonstrated with different cyclodextrins as mobile phase additives in open-tubular liquid chromatography using a stationary pseudophase semipermanent coating. The stable coating was prepared by a successive multiple ionic layer approach using poly(diallyldimethylammonium chloride), polystyrene sulfonate, and didodecyldimethyl ammonium bromide. Increasing concentrations (0–0.2 mM) of various native and derivatized cyclodextrins in 25 mM sodium tetraborate (pH 9.2) were investigated. Chiral separation was achieved for the four test analytes using 0.05–0.1 mM β-cyclodextrin (resolution between 1.11 and 1.34), γ-cyclodextrin (resolution between 0.78 and 1.27), carboxymethyl-β-cyclodextrin (resolution between 1.64 and 2.59), and 2-hydroxypropyl-β-cyclodextrin (resolution between 0.71 and 1.76) with the highest resolutions obtained with 0.1 mM carboxymethyl-β-cyclodextrin. %RSD values were <10%. This is the first demonstration of chiral open-tubular liquid chromatography using achiral chromatographic coatings and cyclodextrins as mobile phase additives.     

Large volume sample stacking of positively chargeable analytes in capillary zone electrophoresis without polarity switching: use of low reversed electroosmotic flow induced by a cationic surfactant at acidic pH

A simple and effective way to improve detection sensitivity of positively chargeable analytes in capillary zone electrophoresis more than 100-fold is described. Cationic species were made to migrate toward the cathode even under reversed electroosmotic flow caused by a cationic surfactant by using a low pH run buffer. For the first time, with such a configuration, large volume sample stacking of cationic analytes is achieved without a polarity-switching step and loss of efficiency. Samples are prepared in water or aqueous acetonitrile. Aromatic amines and a variety of drugs were concentrated using background solutions containing phosphoric acid and cetyltrimethylammonium bromide. Qualitative and quantitative aspects are also investigated.     

Determination of environmentally relevant aromatic amines in the ppt levels by cation selective exhaustive injection-sweeping-micellar electrokinetic chromatography

Environmentally important aromatic amines are determined by micellar electrokinetic chromatography (MEKC) with UV detection. Using a combination of field-enhanced sample injection in the capillary zone electrophoresis format (performed for a longer period than usual, e.g., 200 s at high voltages; cation selective exhaustive injection) and sweeping in the MEKC format, from 10(4)- to 10(5)-fold improvements in detector response are achieved for all positively chargeable test analytes. Preliminary results indicate that limits of detection for the positively chargeable aromatic amines are in the parts per trillion (ppt) levels.     

Electrokinetic chromatography.

The important features of electrokinetic chromatography are critically reviewed. Special emphasis is given to systems using micelles as pseudostationary phase. Short and comprehensive overviews are given on the subjects of separation, comparison with capillary electrochromatography, on-line coupling with mass spectrometry, and developments that are expected in the future. A greater coverage on the subject of improvement of detection sensitivity, specifically by on-line concentration was also contributed.     

Sweeping with an Enhanced Electric Field of Neutral Analyte Zones in Electrokinetic Chromatography

The concept of sweeping has been used in electrokinetic chromatography to explain the concentrating mechanism in micellar electrokinetic chromatography when the sample matrix is a high resistivity non-micellar aqueous solution. Theoretical and experimental studies were undertaken. It was found that the total focusing effect is brought about by the cumulative effect of sweeping and sample stacking. For better analytical results, compounds showing low to moderate retention factors (k) and compounds showing high values of k must be dissolved in low and high conductivity matrices, respectively.     

Micelle to solvent stacking of organic cations in capillary zone electrophoresis with electrospray ionization mass spectrometry

The direction of the effective electrophoretic mobility of small organic cations in micellar electrokinetic chromatography using sodium dodecyl sulphate in a low-pH electrolyte can be reversed in the presence of organic solvent. This effective electrophoretic mobility change is presented here as a new dimension for on-line sample preconcentration of cations in capillary zone electrophoresis (CZE) using a background solution (BGS) modified by an organic solvent. The sample is prepared in a micellar solution without organic solvent. The focusing effect relies on the reversal in the effective electrophoretic mobility at the boundary zone between the micellar matrix and the BGS modified with organic solvent. This on-line sample preconcentration technique, called micelle to solvent stacking (MSS) afforded more than an order of magnitude improvement in concentration sensitivity compared to typical CZE-UV or CZE-electrospray ionization (ESI) MS analysis. The calculated limit of detection (S/N = 3) for pindolol and metoprolol analysed by MSS-CZE-ESI-MS was found to be 0.03 and 0.01 μg/mL, respectively.     

Online transient micellar phase concentration of anions using CTAB in CE

A transient micellar phase extractor using CTAB was described for the online sample concentration of various anionic analytes (drugs and herbicides) in CE. Stacking and separation was performed at neutral pH in coelectroosmotic flow in a hexadimethrine bromide coated fused‐silica capillary. A micellar plug (e.g. 10 mM CTAB) was injected prior to hydrodynamic injection of the analytes prepared in aqueous organic solvent (e.g. with 30% ACN). In the presence of an electric field, the micelles interacted with the anions inside the capillary. This was followed by selective analyte focusing via the mechanism of micelle to solvent stacking. The micelles acted as transient extractor because the stacking ends when the injected micelles completely migrated through the boundary between the sample and micellar plug. Fundamental studies were performed (effect of surfactant concentration, etc.) and the technique yielded 13‐ to 30‐fold improvements in peak height. A stacking CE method in conjunction with liquid–liquid extraction was also tested for the detection of the herbicides fenoprop and mecoprop in fortified drinking water at analyte concentration levels relevant to Australian Drinking Water Guidelines.