基元阀在汽轮机进汽阀研究中的应用

阀碟型线对汽轮机进汽阀的性能影响很大，本文设计了三种形式的基元阀，通过数值模拟手段研究了阀碟型线对流场的影响；得出了不同阀碟形式的性能．     

Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

As+注入硅的紫外-可见椭圆偏振光谱

本文采用椭圆偏振光谱法研究了剂量为1×10¹⁶—3×10¹²cm^-2的As⁺注入硅,及其在700℃退火后的光学性质。得出:当As⁺注入剂量增大到某一程度后,便呈非晶特性。低于临界剂量的样品,其n-λ,ε₂-λ关系曲线随剂量的增大而往下方移动,呈有规律变化;退火后,在大于4000?波段,n-λ与ε₂-λ曲线基本恢复到单晶硅状态。但在小于4000?的紫外区却未完全恢复,注入剂量越大,偏离单晶硅就越大。并指出,紫外光区是离子注入硅的信息敏感区;用有效质量模型计算出注入剂量与损伤度的关系。计算结果与实验符合得较好。 关键词：     

ZnSe及ZnSe/GaAs异质结构中压力导致的直接禁带向间接禁带的转变

用经验赝势方法计算了体ZnSe以及ZnSe/GaAs单异质结系统中ZnSe外延层г、X、L等特殊对称点导带底能量随压力的变化。结果表明，同Si、Ge、GaAs等半导体材料不同，ZnSe的X点导带底具有正的压力系数，但比г点的压力系数小，这是ZnSe材料以及ZnSe基异质结构材料发生直接禁带向间接禁带的转变时所需转变压力较大的根本原因。研究了ZnSe/GaAs异质结构中晶格失配造成的应变对外延层г、X、L对称点压力系数的影响，表明这种晶格失配造成的应变可以极大地减小ZnSe外延层材料由直接禁带向间接禁带的转变压力。     

激光等离子体探针及应用研究

本文介绍用阴影、纹影相干涉方法确定等离子体折射系数变化的原理。分析了等离子体中的非线性效应和对光探测系统的基本要求。并简要叙述了实验上采用的后向喇曼探测束,给出了等离子体干涉、纹影和阴影的测量结果。     

基于MMD算法的HMM参数重估计的矩阵表示

本文提出的MMD算法用于提高模型区别错误信息和正确信息的能力．利用该算法在对模型的参数进行重估计时．涉及到复杂的目标函数的梯度运算．击运用矩阵运算使得梯度运算变得简单明了，因此本文给出了MMD算法下的HMM参数重估计的矩阵表示形式并给出了证明．     

Radiative Lifetimes of Doubly Ionized Terbium

Radiative lifetimes of two short-lived levels （i.e. 4f^8 （TF6）6p^1/2 （6, 1/2）11/2,13/2） in Tb Ⅲ are measured by time-resolved laser-induced fluorescence （LIE） technique with a two-step excitation process. Free Tb Ⅲ ions are produced in a laser-induced plasma. Lifetime values are evaluated with a deconvolution procedure of the timeresolved fluorescence signal with the temporal shape of second-step excitation pulse （about 1 ns）. The lifetimes of the 4f^8 （^7F6）6p^1/2 （6, 1/2）11/2 and 4f^8（^7F6）6p^1/2 （6, 1/2）13/2 levels are determined to be 1.9 （2） and 2.0 （2）ns, respectively.     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

用于激光推进的高功率激光器的选择

 从激光推进的要求出发，阐述了用于激光推进的高功率激光器的选择原则，即激光器必须满足：（1）高的平均功率和峰值功率；（2）高的单脉冲能量；（3）高的重复频率；（4）优良的大气传输特性。主要分析了目前YAG固体激光器、自由电子激光器和TEA脉冲CO₂激光器的特点，通过上述4个方面性能的比较，认为在目前水平下，TEA脉冲CO₂激光器是进行激光推进的首选强激光源，其优点表现在：功率可达10kW量级，单脉冲能量可达0.5~1kJ，重复频率为20~40Hz；激光波长处于大气传输窗口，对大气变化不敏感；工作物质快速流动，不存在热透镜效应和破坏阈值；相关光学元件易于制造；光束质量较好；运行成本低。