Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of suitable digestion methods for the determination of total phosphorus in soils

Total phosphorus in five soils with different compositions which were obtained from different places were extracted by using Na(2)CO(3) fusion, HClO(4) digestion, HClO(4) + HNO(3) digestion, HF + HClO(4) digestion or NaOBr oxidation methods. In order to test the suitability of the HF + HClO(4) digestion the results obtained by this method were compared with the others above, especially the Na(2)CO(3) fusion which is accepted as a standard method. The phosphorus amount found with the HF + HClO(4) digestion method were almost the same as the phosphorus amount by the Na(2)CO(3) fusion method, while the superiority in extracting phosphorus when compared to other methods were obvious. The methods used in the study were evaluated according to the recovery of total phosphorus, ease of application and rapidity with which they were performed. Orthophosphate in the soil extracts was determined by the molybdenum blue colour method. The relationships between methods are examined statistically.     

The sorption behavior of a nickel-insolubilized humic acid system in a column arrangement

The sorption characteristics of insolubilized humic acid (IHA) were investigated for Ni (II) in a column arrangement. The sodium form of the IHA (INaA) was used as a solid phase. Column operations were performed with five steps and all of them were monitored continuously by a flowthrough cell-adapted UV-Vis spectrophotometer. Thus, all solid-phase extraction (SPE) steps were visualized by breakthrough curves and analyses progress were evaluated. However, all calculations and evaluations were focused on the atomic absorption spectrophotometric (AAS) analyses of the solutions collected during the stripping steps. There was a high correlation (r(2), 0.972) between peak area and AAS data of stripping steps. The effect of concentration and pH of the loading solution onto sorption of Ni (II) by INaA was investigated. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Multilayer sorption was found to be agreeable for Ni (II). From the D-R isotherm the mean free energy of sorption (E) was calculated (6.65 kJ mol(-1)) and attributed to the multilayer sorption. Finally, the sorption characteristic of the INaA-Ni (II) system was compared with that of the INaA-Cu (II) system, and possible separation of two ions in a binary mixture system is discussed.     

Toward artificial developmental regulators

A polyamide-peptide conjugate is designed which recruits sequence specifically the developmental regulator Exd to a cognate DNA site. In particular, an eight-ring hairpin polyamide (Im-Im-Py(C3H6NHR)-Py-gamma-Im-Py-Py-Py-beta-Dp) with a heptapeptide (R = Ac-Phe-Tyr-Pro-Trp-Met-Lys-Gly-) attached on a central ring was shown to induce cooperative binding of the Drosophila Hox protein cofactor Exd with a Kd of 4.4 nM in vitro, an order of magnitude more efficient than the natural Hox protein partner Ubx. The conjugate joins two sequence specific domains, one for DNA and one for the protein. This small molecule thus serves as a cooperative protein-DNA dimerizer, which mimics the natural Hox family of developmental regulators.     

Preconcentration and speciation of chromium using a melamine based polymeric sequestering succinic acid resin: its application for Cr(VI) and Cr(III) determination in wastewater

A new melamine based polymeric sequestering resin was prepared for preconcentration and separation of hexavalent chromium from water, and its sequestering action was investigated. The water-insoluble, cross-linked sequestering resin was formed by reaction with bromosuccinic acid and cross-linking of melamine. The active sequestering group on the resin is NH-(Succinic acid) or salt thereof. The resulting chelating resin was characterized by infrared spectra. The newly prepared resin quantitatively retained Cr(VI) at pH 2.0-4.0 when the flow rate was maintained between 1 and 5 ml min⁻¹. The retained Cr(VI) was instantaneously eluted with 25 ml of 0.1 M NaOH. The chromium species were determined by a flame atomic absorption spectrometer. The limits of detection for Cr(VI) and Cr(III) were found to be 5.3 and 4.2 μg l⁻¹, respectively. The precision and accuracy of the proposed procedure was checked by the use synthetic and reference steel samples. The established preconcentration method was successfully applied to the determination and selective separation of Cr(VI) in electroplating industry wastewater. Total concentrations determined by the spectrophotometric method (110.3±0.6 g l⁻¹ Cr(VI) and 1.2±0.3 g l⁻¹ Cr(III)) are compared with those found by FAAS and the obtained results (110.4±1.8 g l⁻¹ Cr(VI) and 1.4±0.5 g l⁻¹ Cr(III)) show good agreement.     

C→N Migrations of the ethoxycarbonyl group in reactions of ortho-substituted aryl isocyanates with the 1,3-zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate

The reactions of meta—para-substituted aryl isocyanates with phosphorus-containing 1,3-zwitterions, which proceed with the CN migration of the CO₂Et group to form the corresponding carbamates, were extended to ortho-substituted aryl isocyanates. The influence of the steric and electronic effects of the ortho substituents in the aromatic rings of aryl isocyanates on the ease of this rearrangement is qualitatively considered.     

Folding, conformational changes, and dynamics of cytochromes C probed by NMR spectroscopy

NMR spectroscopy has become a vital tool for studies of protein conformational changes and dynamics. Oxidized Fe(III)cytochromes c are a particularly attractive target for NMR analysis because their paramagnetism (S = (1)/(2)) leads to high (1)H chemical shift dispersion, even for unfolded or otherwise disordered states. In addition, analysis of shifts induced by the hyperfine interaction reveals details of the structure of the heme and its ligands for native and nonnative protein conformational states. The use of NMR spectroscopy to investigate the folding and dynamics of paramagnetic cytochromes c is reviewed here. Studies of nonnative conformations formed by denaturation and by anomalous in vivo maturation (heme attachment) are facilitated by the paramagnetic, low-spin nature of native and nonnative forms of cytochromes c. Investigation of the dynamics of folded cytochromes c also are aided by their paramagnetism. As an example of this analysis, the expression in Escherichia coli of cytochrome c(552) from Nitrosomonas europaea is reported here, along with analysis of its unusual heme hyperfine shifts. The results are suggestive of heme axial methionine fluxion in N. europaea ferricytochrome c(552). The application of NMR spectroscopy to investigate paramagnetic cytochrome c folding and dynamics has advanced our understanding of the structure and dynamics of both native and nonnative states of heme proteins.     

Differential transition-state stabilization in enzyme catalysis: quantum chemical analysis of interactions in the chorismate mutase reaction and prediction of the optimal catalytic field

Chorismate mutase is a key model system in the development of theories of enzyme catalysis. To analyze the physical nature of catalytic interactions within the enzyme active site and to estimate the stabilization of the transition state (TS) relative to the substrate (differential transition state stabilization, DTSS), we have carried out nonempirical variation-perturbation analysis of the electrostatic, exchange, delocalization, and correlation interactions of the enzyme-bound substrate and transition-state structures derived from ab initio QM/MM modeling of Bacillus subtilis chorismate mutase. Significant TS stabilization by approximately -23 kcal/mol [MP2/6-31G(d)] relative to the bound substrate is in agreement with that of previous QM/MM modeling and contrasts with suggestions that catalysis by this enzyme arises purely from conformational selection effects. The most important contributions to DTSS come from the residues, Arg90, Arg7, Glu78, a crystallographic water molecule, Arg116, and Arg63, and are dominated by electrostatic effects. Analysis of the differential electrostatic potential of the TS and substrate allows calculation of the catalytic field, predicting the optimal location of charged groups to achieve maximal DTSS. Comparison with the active site of the enzyme from those of several species shows that the positions of charged active site residues correspond closely to the optimal catalytic field, showing that the enzyme has evolved specifically to stabilize the TS relative to the substrate.     

Exploring the self-assembly of dumbbell-shaped polyoxometalate hybrids,from molecular building units to nanostructured soft materials

The formation of hierarchical nanostructures using preformed dumbbell-like species made of covalent organic–inorganic polyoxometalate (POM)-based hybrids is herein described. In this system, the presence of charged subunits (POM, metal linkers, and counter ions) in the complex molecular architecture can drive their aggregation, which results from a competition between the solvation energy of the discrete species and intermolecular electrostatic interactions. We show that the nature of the POM and the charge of the metal linker are key parameters for the hierarchical nanoorganization. The experimental findings were corroborated with a computational investigation combining DFT and molecular dynamics simulation methods, which outlines the importance of solvation of the counter ion and POM/counter ion association in the aggregation process. The dumbbell-like species can also form gels, in the presence of a poorer solvent, displaying similar nanoorganization of the aggregates. We show that starting from the designed molecular building units whose internal charges can be controlled by redox trigger we can achieve their implementation into soft nanostructured materials through the control of their supramolecular organization.

The formation of hierarchical nanostructures using supramolecular dumbbell-like species made of organic–inorganic polyoxometalate-based hybrids is investigated by combination of SAXS and computational methods.