Numerical Prediction of the Strain State of Thermoset Matrix/Mineral Filler Composite Plates

The numerical prediction of the fields of inelastic strains (the linear invariant of the tensor of inelastic strains) in thermoset polyester/marble filler composite plates is discussed. A uniformly distributed load is applied to the plates, which lie on a steel base. The strain fields are predicted by means of the boundary element method by using creep test data for the composites and the polyester matrix itself. Identical creep tests were performed for two ages of the materials (1 month and 13 years), which allowed evaluating the aging effect. The study is carried out in two stages. At the first stage, the application of the generalized Maxwell-Gurevich equation to the thermoset matrix/mineral filler composite is demonstrated. The model parameters determined from the experimental creep data is used for the second stage, where the state of inelastic strains in the plates is predicted by applying the boundary element method. The influence of composite formulation (filler content) and physical aging of the polyester matrix on the state of inelastic strains in the plates is shown.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 145–156, March–April, 2005.     

Measured and calculated vertical structure of a sound field in the ocean

Results of measuring the monochromatic sound field with a dipping probe in the deep ocean are presented. The sound speed profile in the region of measurements had a minimum at a depth of 1600 m. The experiment was carried out in the Atlantic Ocean with the use of two vessels separated by a distance of approximately four ray cycles (～240 km). The experimental data are compared with the calculations based on a new concept of the Brillouin waves for describing the vertical structure of the sound field produced by rays. It is shown that a satisfactory agreement between experiment and calculation can be achieved by fitting the parameters of the experiment. Such a procedure allows one to refine or even to determine the experimental conditions, which not are always known. The proposed method of calculation offers an opportunity for solving inverse problems of ocean acoustics.     

Corn stover fractions and bioenergy

Information is presented on structure, composition, and response to enzymes of corn stover related to barriers for bioconversion to ethanol. Aromatic compounds occurred in most tissue cell walls. Ferulic acid esterase treatment before cellulase treatment significantly improved dry weight loss and release of phenolic acids and sugars in most fractions over cellulase alone. Leaf fractions were considerably higher in dry weight loss and released sugars with esterase treatment, but stem pith cells gave up the most phenolic acids. Results help identify plant fractions more appropriate for coproducts and bioconversion and those more suitable as residues for soil erosion control.     

Generation of angular momentum of fission fragments in a cluster model

Based on the dinuclear system concept, the role of bending vibrations in creation of the angular momentum of primary fission fragments is investigated. For ²⁵²Cf spontaneous fission, the angular momenta of the fragments are calculated as a function of the neutron multiplicity and compared with available experimental data. Different cluster compositions of the ²⁵²Cf fission modes at the scission point are considered.     

640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

Topological K-groups of two-dimensional local fields

A complete two-dimensional local field K of mixed characteristic with finite second residue field is considered. The existence of a completely ramified extension L of K such that L is a standard field is assumed. It is proved that the rank of the quotient U(1)K ₂ ^top K/T_K, where T_K is the closure of the torsion subgroup, is equal to the degree of the constant subfield of K over ℚ_p. I. B. Zhukov constructed a set of generators of this quotient in the case where K is a standard field. In this paper, two natural generalizations of this set are considered, and it is proved that one of them generates the entire group and the other generates its subgroup of finite index. Bibliography: 5 titles. __________ Translated from Zapiski Nauchnykh Seminarov POMI, Vol. 343, 2007, pp. 206–221.     

HPLC study of starch hydrolysis products obtained with α-amylase from bacillus amyloliquefaciens and bacillus licheniformis

Two bacterial α-amylases from new industrial strains were studied: α-amylase fromBacillus amyloliquefaciens CCM 3502 (Czechoslovak) and thermostable α-amylase fromBacillus licheniformis 44MB82 (Bulgarian). The thermostable enzyme hydrolyzed starch mainly to dextrins, and after 1 h, 30% of the products were oligosaccharides. TheB. amyloliquefaciens enzyme produced more maltooligosaccharides than the first enzyme (B. licheniformis). Within 1 h, up to 80% of the substrate were hydrolyzed, giving different spectrum of oligosaccharides in comparison with the thermostable one.     

Application of a Near-Optimal Reinforcement Learning Controller to a Robotics Problem in Manufacturing: A Hybrid Approach

Optimization theory provides a framework for determining the best decisions or actions with respect to some mathematical model of a process. This paper focuses on learning to act in a near-optimal manner through reinforcement learning for problems that either have no model or the model is too complex. One approach to solving this class of problems is via approximate dynamic programming. The application of these methods are established primarily for the case of discrete state and action spaces. In this paper we develop efficient methods of learning which act in complex systems with continuous state and action spaces. Monte-Carlo approaches are employed to estimate function values in an iterative, incremental procedure. Derivative-free line search methods are used to obtain a near-optimal action in the continuous action space for a discrete subset of the state space. This near-optimal control policy is then extended to the entire continuous state space via a fuzzy additive model. To compensate for approximation errors, a modified procedure for perturbing the generated control policy is developed. Convergence results under moderate assumptions and stopping criteria are established.     

Elastic and Thermophysical Properties of Poly(Vinyl Chloride) and Chlorinated Polyethylene Blends

The results of experimental and theoretical investigations of elastic and thermophysical properties of poly(vinyl chloride) (PVC) and chlorinated polyethylene (CPE) blends are presented. Eight types of specimens with different ratios of weight contents of PVC and CPE (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) were tested. The effect of blend composition on the elastic constants (tensile and shear modulus) is discussed. The data on the thermal conductivity, thermal diffusivity, and heat capacity of the blends investigated are also presented.