Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy

This article presents a new methodology for the quantitative determination of the progress of the curing reaction of a thermosetting resin, using the results of electrical impedance spectroscopy. The method is an extension of the use of the imaginary impedance maximum as a reaction progress indicator and is based on the demonstration of a close correlation between the reaction rate, as measured by conventional differential scanning calorimetry, and the rate of change of the value of the imaginary impedance spectrum maximum. Tests on a commercial aerospace epoxy resin under both isothermal and dynamic heating conditions with calorimetry and impedance spectroscopy have demonstrated the validity of the method and set the accuracy limits involved. This technique can be used as a real-time online control tool for thermoset composite manufacturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 146–154, 2004     

Aluminum(III) complexes containing O,O chelating ligand

The stoichiometric reactions of trimethylaluminum with 2,6‐(MeOCH₂)₂C₆H₃OH (LH) revealed compounds L₃Al ( 1 ) and L₂AlMe ( 2 ). On the other hand reaction of 1 equiv. of LH with trimethylaluminum did not lead to the formation of complex LAlMe₂ ( 3 ), rather 2 together with Me₃Al were observed as a result of a disproportionation of 3 . Compounds 1 and 2 were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy and in the case of 1 by X‐ray diffraction. Derivative 2 underwent transmetalation with Ph₃SnOH, giving LSnPh₃ ( 4 ) as the result of a migration of ligand L from the aluminum to the tin atom. The identity of 4 was established by elemental analysis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and ¹H, ¹¹⁹Sn HMBC experiments. The system 2 and B(C₆F₅)₃ in a 1:1 molar ratio was shown to be active in the polymerization of propylene oxide and ε‐caprolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

A review on initiatives for the management of daily medical emergencies prior to the arrival of emergency medical services

Central European Journal of Operations Research - Emergency services worldwide face increasing cost pressure that potentially limits their existing resources. In many countries, emergency services...     

The relative importance of temperature and isotope effects on the dipole oscillator strength distribution of H2

Summary The calculation of the effects of temperature and isotopic composition on the energy weighted moments of the dipole oscillator strength distribution of H₂ in the random phase approximation to the polarization propagator are reported. It is seen that the effect of isotopic composition is small, while that of temperature is of an order accessible to experiment. We find that all the mean excitation energiesI , for =–1, 0, 1, decrease with temperature as does the dipole oscillator strength momentS() for >0, while the opposite is true for <0. These effects are interpreted in terms of the bond length dependence of the excitation energies.     

2,8'-disubstituted-1,1'-binaphthyls: a new pattern in chiral ligands

The title binaphthyls 19 and 26, which are the positional isomers of 2-methoxy-2'-(diphenylphosphino)-1,1'-binaphthyl (MOP, 19) and 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN, 26), have been synthesized by Suzuki coupling as the key step (10 + 15-->18), followed by functional group transformations, involving C-P and C-N bond formation (18-->19 and 18-->23). Racemic intermediate 22 was resolved by co-crystallization with N-benzylcinchonidinium chloride and the absolute configuration determined by X-ray crystallography. These novel binaphthyls are configurationally stable and, as such, potentially usable as chiral ligands in asymmetric reactions. Michael addition of the glycine-derived enolate 40 to methyl acrylate, carried out in the presence of (R)-(-)-27 as the chiral phase-transfer catalyst, afforded L-glutamic acid (S)-(+)-43 of 92% ee (after hydrolysis of the primary product).     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Phototoxic process after rapid photosensitive membrane damage of 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride

We report a new aspect of rapid (<30 s) light-induced cell membrane damage photosensitized by 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride (BAT), which is a water-soluble alpha-terthienyl analogue, using a high-power laser (light intensity 1.6 W cm(-2)). In this paper, we will discuss the relationship between the exposure time of the cells to the photosensitizer and the phototoxic process. Three toxic processes can be identified: first, a non-light-mediated toxicity dependent on BAT-cell incubation; second, a phototoxicity independent of BAT exposure time when the BAT concentration is in the 2-10-microM range; third, a phototoxicity dependent on BAT exposure time when BAT concentration becomes 20 microM. The cytotoxicity decreases when alpha-tocopherol, an antioxidant, is added to a cell membrane. This pattern of phototoxicity is the typical of a phospholipid peroxidation chain reaction and oxidative damage of membrane proteins triggered by a reactive oxygen species generated by a triplet state of BAT. The BAT exposure time is clearly correlated with the partition of the photosensitizer in the cell membrane and inside the cell.     

A study of the thermal and light induced spin transition in [FeL2](BF4)2 and [FeL2](ClO4)2 L=2,6-di(3-methylpyrazol-1-yl)pyrazine

The spin crossover compounds [FeL2](BF4)2, L=2,6-di(3-methylpyrazol-1-yl)pyrazine and [FeL2](ClO4)2 have very unusual two stage spin transitions which are initially steep and then become more gradual. A detailed variable temperature single crystal X-ray diffraction study has shown that the course of the spin transition is controlled by an order-disorder transition in the counter anions. The high and low spin states both crystallise in the tetragonal space group I4, the structures of the high and low spin states are presented at 290 and 30 K, respectively. The title compounds are shown to undergo LIESST (Light Induced Excited Spin State Trapping) under irradiation with either red or green laser light with wavelengths of 632.8 and 532.06 nm, respectively, at 30 K. The cell parameters for the tetragonal photo-induced metastable high spin state at this temperature are a= 9.169(6), c= 17.77(1) A for [FeL2](ClO4)2 with an increase in unit cell volume of 21 A3, and a= 9.11(1), c= 17.75(2) A and an increase in volume of 42.8 A3 for [FeL2](BF4)2.