Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.     

Proton affinity of proline and modified prolines using the kinetic method: role of the conformation investigated by ab initio calculations

The proton affinities of proline, cis-3-methylproline and cis-3-ethylproline have been measured by the kinetic method using an ion trap instrument; the values obtained are 936, 940.5, and 943 kJ mol(-1), respectively. The experimental values are consistent with those obtained by high-level ab initio calculations (B3LYP/6-31+G*//B3LYP/6-31G* and B3P86/6-31+G*//B3LYP/6-31G*). Several conformations of neutral and protonated proline were considered, in particular the endo and exo ring structure and the position of the carboxyl group. These results show the importance of the position of the hydrogen atom of the carboxyl group in determining the most stable protonated proline structure.     

Synthesis of cis,cis,cis-tetrasubstituted cyclobutanes. Trapping of tetrahedral intermediates in intramolecular nucleophilic addition

The intramolecular [2 + 2] photocycloaddition of bismaleimides leads to cage diimides 2. Nucleophilic addition on these compounds (NaBH4, RLi, or MeONa) gives rise to various diazatetracyclic 4 and 11 or oxadiazapentacyclic 3 "bowl shaped" alcohols. X-ray analyses of 3c and 11a provide definite structural data concerning these two highly functionalized compounds.     

Characterization of Pentaclethra macroloba oil

The Pracaxi oil—(Pentaclethra macroloba) contains high concentrations of fatty acids with emollient action that contribute to skin hydration. The use of this oil is supported by the utilization of natural resources thus enabling regional development and social contribution. The objective of this study was to characterize the P. macroloba oil by thermogravimetry (TG, DTG, and DTA), gas chromatography, Fourier transform infrared spectroscopy (FT-IR), and oxidation stability—Rancimat, aiming at the quality control of plant raw material. Three samples of crude oil sold by Amazon Oil Industry (Ananindeua, Pará, Brazil) were studied. The analysis of these oil samples showed different fatty acids, especially the behenic, oleic, linoleic, and lignoceric acids totalizing approximately 96 % of the grease composition and in smaller percentage arachidic, lauric, myristic, palmitic, and linolenic acids were found. The major acids have wide medicinal use. According to the TG/DTG curve, thermal stability was observed up to 220 °C, indicating a greater mass loss related to the dehydration and elimination of volatile substances. The thermal decomposition process occurred in the range of 430–450° C according to the DTG curve. The absorption spectrum in the infrared region (FT-IR) showed well-defined bands confirming the presence of functional groups present in the oil. Tests in a Rancimat have shown an induction period between 8 and 10 h demonstrating that the samples are in agreement with the standards required by ANP No. 14/2012 which requires at least 6 h of testing.     

Cerium hybrid silica coatings on stainless steel AISI 304 substrate

AISI 304 Stainless Steel is widely used in different industrial fields because of its mechanical and corrosion properties. However, its tendency to corrosion in presence of halide ions limits the applications. One strategy to improve the corrosion resistance is the use of coatings barriers containing corrosion inhibitors in their formulation. The lanthanides present attractive green and corrosion properties for the substitution of chromates, which are the most common substances used as corrosion protection. However, these compounds are highly toxic, and an intense effort is being undertaken to replace them. Cerium is a good alternative because of its relatively low cost and abundance. It fulfils the basics requirements for being considered an alternative inhibitor: the ions form insoluble hydroxides and they present low toxicity. Inorganic and hybrid sol-gel coatings have been developed to increase the corrosion resistance of metals and they provide an excellent vehicle for the incorporation of secondary phases including particles and metal ions as cerium ions. The aim of this work was to study the influence of the incorporation of cerium ions in hybrid silica sol-gel coatings deposited on AISI 304 stainless steel as substrate as a potential replacement of chromate treatments. This system should combine the barrier protection effect of silica coating with the corrosion inhibitor effect of the cerium ions inside the coatings. After 7 days of immersion in NaCl, coated substrates showed lower current densities than the bare steel, although the coatings produced from Ce (III) salts experience a slight weakening in time and those obtained from Ce (IV) chemicals evidence an enhance in the coating performance, probably due to the plugging of corrosion products in the defective areas of the film.     

Novel adsorbent based on silkworm chrysalides for removal of heavy metals from wastewaters

In this contribution, maximum capacity for adsorption of Pb(2+), Ni(2+), and Cu(2+) by silkworm chrysalides (SC) was determined. The raw silkworm chrysalides (SC(r)) and chrysalides after acidic washing (SC(w)) were used. Chitin (CT), extracted from SC, and chitosan (CS), with 85% deacetylation, were employed as reference samples. Adsorption tests showed that all the studied adsorbents exhibited excellent performance in removal of metals. The choice of a more appropriate adsorbent is related to its efficiency for removal of a specific metal. The studied materials presented different intensities for metal adsorption as follows: (i) Ni(2+)>Cu(2+)>Pb(2+) for SC(r); (ii) Pb(2+)>Cu(2+)>Ni(2+) for SC(w); (iii) Ni(2+)>Cu(2+)>Pb(2+) for CT; and (iv) Cu(2+)>Pb(2+)>Ni(2+) for CS. Metal adsorption onto SC(r) and CS was analyzed by Freundlich and Langmuir isotherm equations. Adsorption values for CS-Pb and SC(r)-Ni were provided by the Freundlich model, while the adsorption values for CS-Cu, CS-Ni, SC(r)-Pb, and SC(r)-Cu were provided by the Langmuir model. The studied adsorbents are suitable for use in treatment of wastewater. From the economic point of view, the use of SC(r) as an adsorbent of heavy metals (mainly Ni(2+)) on the large industrial scale would be more appropriate.     

The influence of chondroitin sulfate on composite multilamellar liposomes containing chitosan

A composite multilamellar liposome containing chitosan attached to the inside and outside of the membrane as well as an opposite charged polyelectrolyte, chondroitin, adsorbed at the surface was developed. Not only the chitosan/chondroitin ratio but also the concentration of them were varied. The structure and superficial properties of the liposomes were studied through a combination of light scattering, zeta potential, and small-angle X-rays scattering techniques. While the chitosan/chondroitin ratio affected the superficial charge distributions, the concentration of polyelectrolytes affected the structural properties of the liposomes, as the rigidity of the phospholipid layers. The superficial charge of the resultant composite liposome was influenced by the type and concentration of the polyelectrolyte. Information about the charge density could be obtained by the treatment of zeta potential data, and it was used to estimate the amount of chondroitin adsorbed to the liposome surface. Applying the modified Caillé theory to the X-rays scattering curves, information about the internal structure of the liposomes was accessed. The ability to control the properties of composite multilamellar liposomes is an important issue when they have to be applied as a biomaterial device component.