Hydroformylation and hydroalkylcarbonylation of 3,4-dihydro[2H]pyran catalysed by Co2(CO)8 under syngas conditions

In the cobalt-catalysed hydroformylation of 3,4-dihydro[2H]pyran, the influence of different reaction parameters such as time, pressure, triphenylphosphine addition, catalyst and substrate concentration has been investigated. 2-formyl-tetrahydropyran, tetrahydropyran and a hydroalkylcarbonylation product were the main reaction products. The selectivity towards 2-formyl-tetrahydropyran formation is favoured at constant catalyst and substrate concentration. The coordination of the pyran’s oxygen to the cobalt atom seems to be an important intermediate for the formation of 2-formyl-tetrahydropyran. Different substrate or catalyst concentrations promote the formation of other reduced products. The addition of triphenylphosphine to the catalyst leads to a less active species, which decreases the yield and promotes the hydroalkylcarbonylation reaction.     

Polymerization kinetics and microstructure of waterborne acrylic/alkyd nanocomposites synthesized by miniemulsion

Waterborne acrylic‐alkyd nanocomposites are expected to combine the positive properties of alkyd resins and acrylic polymers. In this work, the kinetics of the miniemulsion polymerization used to synthesize these nanocomposites and the effect of the process variables on the polymer architecture and particle morphology was investigated. It was found that resin hydrophobicity and the type of initiator strongly affected the microstructure of these materials. The mechanisms responsible for these effects were discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4871–4885, 2009     

One-pot synthesis of new 6-(alkylamine)dibenzo[c,e][1,2]oxaphosphinine-6-oxides

Several new 6-(alkylamine)-6H-dibenz[c,e][1,2]oxaphosphinine-6-oxides were prepared through a one-pot reaction, starting with 2-phenylphenol, phosphorus trichloride, and a Zn catalyst, to form 6-chloro-6H-dibenz[c,e][1,2]oxaphosphine. The alkylamine derivatives were subsequently prepared through a nucleophilic substitution reaction involving aliphatic amines and H₂O₂ oxidation under soft conditions. This method has the advantages that it is a one-pot synthesis, does not require an inert atmosphere, and involves in situ catalyst formation.     

An improved cryopreservation protocol for pineapple apices using encapsulation-vitrification

Several modifications to the cryogenic protocols previously described for pineapple apices were performed using vitrification and encapsulation-vitrification. Pregrowth of apices in sucrose-proline before loading significantly reduced the exposure duration to PVS2 and PVS3 required for successful cryopreservation. Encapsulation and treatments with PVS3 at 0 degree C gave the highest survival before and after cooling. Optimal conditions involved the encapsulation of pineapple apices in calcium alginate (3 percent) followed by a 2-d preculture in liquid medium with 0.16 M sucrose + 0.3 M proline for 24 h and then transfer to 0.3 M sucrose + 0.3 M proline for an additional 24 h. After preculture, samples were loaded in 0.75 M sucrose + 1 M glycerol solution at room temperature (25 min) and dehydrated with PVS3 at 0 degree C for 60 min before immersion into liquid nitrogen. Following this procedure 54 percent and 83 percent of apices from MD-2 and Puerto Rico varieties respectively survived.     

Polymerization of Diphenylbutadiyne Derivatives in Solution by Free Radical Initiator

In order to study free radical reactions of aromatic diacetylenes, the reaction of diphenyldiacetylene with di‐t‐butylperoxide was carried out in 1,2‐dichlorobenzene. The presence of t‐butoxy radicals considerably accelerated product formation, and oligomers with number average molecular weights of 700–2000 were obtained. There is no fragment of the t‐butyl group in the oligomers obtained according with the ¹H‐NMR spectrum. Furthermore, it is impossible that the t‐butoxy radicals would have initiated the oligomerization. The intense ESR spectra observed during the reaction at 130°C are due to the diradicals of oligomeric diphenylbutadiyne. It was concluded that the oligomerization proceeds via coupling of diradicals, and not the successive addition of radicals to monomers. The purified product oligomers did not contain carbonyl groups indicating there was no oxidation, and their ESR spectra have revealed that these oligomers contained a substantial amount of living free radicals stable in air at room temperature. The reason why high polymers are not obtained is the steric effect of oligomeric diradicals for coupling, as well as probable cyclization.     

Introducing axial chirality into mesoionic 4,4'-bis(1,2,3-triazole) dicarbenes

Mesoionic 4,4'-bis(1,2,3-triazole-5,5'-diylidene) Rh(I) complexes having a C2 chiral 4,4'-axis were accessed from 3-alkyltriazolium salts in virtually complete de. Their structure and configurational integrity were assessed by NMR spectroscopy, X-ray crystallography, and chiral HPLC. Computational analysis of the MICs involved in the reaction suggested the formation of a highly stable and unprecedented cation-carbene intermediate species, which could be evidenced experimentally by cyclic voltammetry analysis.     

Cold crystallization and multiple melting behavior of poly(l-lactide) in homogeneous and in multiphasic epoxy blends

Cold crystallization and melting of poly(l-lactide) (PLLA) blended with an uncured or with an amino-cured epoxy resin (diglycidyl ether of bisphenol-A [DGEBA]) were investigated. It was found that the uncured PLLA/DGEBA blends were miscible, as they exhibited a single composition-dependent glass transition temperature (T _g). Melting point depression measurements indicated the existence of some type of interaction between the blend components, which was confirmed by Fourier transform infrared spectroscopy. Depending on the crystallization conditions and on the blend composition, a mixture of α and α′ crystals have been detected in PLLA and in uncured DGEBA/PLLA blends when crystallized from the glassy state. At high DGEBA contents, preferably imperfect α crystals are formed. On the contrary, at low DGEBA contents, the α′ form predominates and an exotherm associated to the α′–α transformation appears on the differential scanning calorimetry (DSC) scan before the main melting peak. Upon curing, the system transforms from a homogeneous mixture with a single refractive index into an opaque multiphasic one, as revealed by the existence of two T _gs in the DSC scans. These cross-linked immiscible blends displayed a single crystallization exotherm which scarcely changed with composition, and PLLA cold crystallized mainly into the α′ form from an almost pure PLLA phase; subsequently, the α′ crystals transform into the α form just before melting during the DSC scan.     

Optimization via experimental design of an SPE-HPLC-UV-fluorescence method for the determination of valsartan and its metabolite in human plasma samples

A chemometric approach was applied for the optimization of the extraction and separation of the antihypertensive drug valsartan and its metabolite valeryl-4-hydroxy-valsartan from human plasma samples. Due to the high number of experimental and response variables to be studied, fractional factorial design (FFD) and central composite design (CCD) were used to optimize the HPLC-UV-fluorescence method. First, the significant variables were chosen with the help of FFD; then, a CCD was run to obtain the optimal values for the significant variables. The measured responses were the corrected areas of the two analytes and the resolution between the chromatographic peaks. Separation of valsartan, its metabolite valeryl-4-hydroxy-valsartan and candesartan M1, used as internal standard, was made using an Atlantis dC18 100 mm x 3.9 mm id, 100 angstroms, 3 microm chromatographic column. The mobile phase was run in gradient elution mode and consisted of ACN with 0.025% TFA and a 5 mM phosphate buffer with 0.025% TFA at pH 2.5. The initial percentage of ACN was 32% with a stepness of 4.5%/min to reach the 50%. A flow rate of 1.30 mL/min was applied throughout the chromatographic run, and the column temperature was kept to 40+/-0.2 degrees C. In the SPE procedure, experimental design was also used in order at achieve a maximum recovery percentage and extracts free from plasma interferences. The extraction procedure for spiked human plasma samples was carried out using C8 cartridges, phosphate buffer (pH 2, 60 mM) as conditioning agent, a washing step with methanol-phosphate buffer (40:60 v/v), a drying step of 8 min, and diethyl ether as eluent. The SPE-HPLC-UV-fluorescence method developed allowed the separation and quantitation of valsartan and its metabolite from human plasma samples with an adequate resolution and a total analysis time of 1 h.     

Biovalidation of an SPE-HPLC-UV-fluorescence method for the determination of valsartan and its metabolite valeryl-4-hydroxy-valsartan in human plasma

A simple and fast method for the simultaneous determination of the antihypertensive drug Valsartan and its metabolite in human plasma has been validated. The proposed method deals with SPE, followed by an HPLC separation coupled with fluorimetric and photometric detection. The optimization of the SPE-HPLC method was achieved by an experimental design. The separation was performed on an RP C18 Atlantis 100 mmx3.9 mm column. The mobile phase consisted of a mixture of ACN 0.025% TFA and phosphate buffer (5 mM, pH = 2.5) 0.025% TFA and was delivered in gradient mode at a flow rate of 1.30 mL/min. The eluent was monitored with a fluorescence detector at 234 and 378 nm excitation and emission wavelengths, respectively, and at 254 nm using a photometric detector. The full analytical validation was performed according to the Food and Drug Administration (FDA) 'guidance for industry: bioanalytical method validation' and the recoveries obtained for Valsartan and its metabolite ranged from 94.6 to 108.8%. The validated method was successfully applied to 12 plasma samples obtained from patients under antihypertensive treatment with Valsartan.