Synthesis and characterization of a semiflexible liquid crystalline polyester with a broad nematic region

In this paper, we report on the synthesis and detailed characterization of a new semiflexible nematic liquid crystalline polyester which could serve as a 'model' polyester for a variety of physical and physico-chemical investigations. The polymer is a nematic liquid over a wide temperature range-from the glass transition temperature at ∼95°C to the isotropic transition at ∼240°C. We expect this polyester to be particularly useful for studying the effect of flow on the orientation of liquid crystalline polymers, as well as the production and removal of disclinations.     

Polyamide Layer Chromatography. VIII. Preparation of Polyamide Layer on Poly(ethylene terephthalate) Film and its Application to Aromatic Nitro Compounds

Poly(ethylene terephthalate) film was used as supporter for preparation of polyamide layer. The most convenient method of preparation was described. This layer can be cut into any size and its sensitivity is higher than the glass plate supported layer. Twenty aromatic nitro compounds were used to show the behavior of polyester film based polyamide layer.     

Studies toward labeling cytisine with [11C]phosgene: rapid synthesis of a delta-lactam involving a new chemoselective lithiation-annulation method

With the aim of the radiolabeling of cytisine, a potent agonist of nicotinic receptors, with [(11)C]phosgene, the rapid synthesis of a lactam model of our target has been studied. The key step of the delta-lactam formation is a new chemoselective lithiation-annulation method, under high dilution, of a suitable piperidinylcarbamoyl chloride. This precursor was obtained from (2-hydroxyethyl)piperidine in a linear synthetic sequence involving a Corey-Fuchs olefination of the corresponding aldehyde, followed by a selective reduction, using a diimide equivalent, of an iodoalkyne into a (Z)-iodopropene piperidine. This alkene served as main precursor to study the cyclization according to several procedures using phosgene as the required carbonylating reagent.     

1-Alkoxy-2-azaallenyl-komplexe von chrom und wolfram

The successive reaction of (CO)₆M with Na[NCR₂¹] and [Et₃O]BF₄ yields (CO)₅M[C(NCR₂¹)OEt] (II: M = Cr; III: M = W; CR₂¹ = C(C₆H₄Br-p)₂ (a), CPh₂ (b), C(C₆H₄OMe-p)₂ (c), C(C₆H₄)₂O (d), CBu₂^tt (e)). Hexacarbonyltungsten, (CO)₆W, reacts with Na[NCPh₂] and MeOSO₂F to give (CO)₅W[C(NCPh₂) OMe] (IV). X-Ray analysis of IIe shows that: (1) the CNC fragment is almost linear (171.7°); (2) the two NC bond lengths are equal within experimental error; and (3) the O,C,Cr,N plane is perpendicular to the C(Me₃),C,N,C(Me₃) plane (90.0°). Therefore compounds II–IV are best described as 1-alkoxy-2-azaallenyl complexes.     

Application of the photoionization detector for the determination of ethanol in aqueous solutions and human breath

A determination of ethanol is described, which is based on a purging system in conjunction with a photoionization detector. With that system a fast and reliable determination of ethanol in aqueous solutions is possible. The system has been used for the analysis of wine. The 3delta-detection limit has been 0.005% ethanol, the relative standard deviation 4.8 to 6.0% and the time constant of the entire analytical system 20 s. The photoionization detector has been also applied to the analysis of artificial and genuine human breath. A comparison with gas-chromatography and non-dispersive IR-detection has been proven the reliability of results.     

Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods

In the photovoltaic industry the etching of silicon in HF/HNO₃ solutions is a decisive process for cleaning wafer surfaces or to produce certain surface morphologies like polishing or texturization. With regard to cost efficiency, a maximal utilisation of etch baths in combination with highest quality and accuracy is strived. To provide an etch bath control realised by a replenishment with concentrated acids the main constituents of these HF/HNO₃ etch solutions including the reaction product H₂SiF₆ have to be analysed. Two new methods for the determination of the total fluoride content in an acidic etch solution based on the precipitation titration with La(NO₃)₃ are presented within this paper. The first method bases on the proper choice of the reaction conditions, since free fluoride ions have to be liberated from HF and H₂SiF₆ at the same time to be detected by a fluoride ion-selective electrode (F-ISE). Therefore, the sample is adjusted to a pH of 8 for total cleavage of the SiF₆²⁻ anion and titrated in absence of buffers. In a second method, the titration with La(NO₃)₃ is followed by a change of the pH-value using a HF resistant glass-electrode. Both methods provide consistent values, whereas the analysis is fast and accurate, and thus, applicable for industrial process control.     

Oligothiophene isocyanides for platinum-based molecular electronic applications

Understanding molecular orientation on a metal surface is key to designing molecular electronic device junctions. Though platinum device electrodes are of particular interest as a more stable alternative to the often used gold electrodes, the chemisorption of conducting molecules onto platinum surfaces has not been thoroughly studied. We present herein the first detailed study of the ability and manner in which soluble oligothiophene isocyanides, of lengths ranging from 2 to 7 nm, chemisorb onto platinum surfaces and nanoparticles. It was found that these oligothiophene isocyanides stand at a 41 degrees angle from the platinum surface normal, suggesting their applicability in molecule-bridged platinum electrode devices.     

Preferred dimerization of tetra-tolyl- and tetra-tosylurea derivatives of flexible and rigidified calix[4]arenes

The dimerization of tetratolyl- and tetratosyl-urea derivatives 1 and 2, derived from a tetrapentoxy calix[4]arene in the cone conformation and of the corresponding tetra-urea derivatives 3 and 4, in which the cone conformation is rigidified by the two crown-3 tethers, have been studied. All six possible equimolar mixtures were examined by 1H NMR using CDCl3 and CD2Cl2 as solvents. While no heterodimers are found for the combinations 1/3 and 2/4 in either solvent, all remaining combinations lead to the (exclusive) formation of heterodimers in CD2Cl2. In CDCl3 heterodimers are only observed for the combinations of 3 with 2 or 4. These results are discussed in terms of entropic and enthalpic contributions and compared with MD-simulations in a box of chloroform solvent molecules.