In this communication, polyanionic poly(potassium 3‐sulfopropyl methacrylate) (PSPM) brushes were switched from hydrophilic to hydrophobic by exchange of the counter cations. First, poly(potassium 3‐sulfopropyl methacrylate) brushes were grown by means of atom transfer radical polymerization (ATRP) from thiol monolayers of initiating ω‐mercaptoundecyl bromoisobutyrate and mixed monolayers of thiol initiator and 1‐undecanothiol (blank thiol) attached to gold surfaces. The kinetics of the polymerization reaction were followed by means of the quartz microbalance technique with dissipation (QCM‐D). The collapse of PSPM brushes in the presence of cationic surfactants like quaternary ammonium salts (tetraethylammonium bromide, hexadecyltrimethylammonium bromide) and imidazolium salts (1‐dodecyl‐3‐methylimidazolium bromide, 1H,1H,2H,2H‐perfluoro‐1‐decyl‐3‐methylimidazolium bromide) was shown by QCM‐D. Water contact angle measurements proved that the wettability of the surface could be tuned reversibly from hydrophilic values (<30 °) to hydrophobic ones (>85 °).
The quartz crystal microbalance with dissipation technique (QCM‐D) and atomic force microscopy (AFM) have been employed to study the interaction of N‐tetradecyl trimethyl ammonium bromide (TdTmAB) with polyelectrolyte multilayers containing poly(sodium 4‐styrene sulfonate) (PSS) as the polyanion and either poly(allylamine hydrochloride) (PAH) or poly(diallyl dimethyl ammonium chloride) (PDADMAC) as the polycations. The multilayers were exposed to aqueous solutions of TdTmAB. This resulted in a selective removal of PDADMAC PSS layers while layers with PAH as polycation remained stable. It is suggested that PDADMAC/PSS multilayers can be employed as strippable protecting layers.
Responsive polyelectrolyte multilayers (PEMs) of poly(diallyl dimethyl ammonium chloride) (PDADMAC) and poly(styrene sodium sulfonate) (PSS) with thicknesses between 350 and 400 nm for 11 deposited polyelectrolyte layers were fabricated assembling the polyelectrolytes at 3 M NaCl. When the 3 M NaCl bulk solution is replaced by water, the PEMs release water, approximately a 46% of the total mass, and experience a thickness reduction of more than 200 nm. Changes in thickness and water content are fully reversible. The film recovers its original thickness and water content when it is exposed again to a 3 M NaCl solution. A responsive polymer film is achieved with the capability of swelling at high ionic strength and collapsing in water with variations in thickness of hundred of nanometers. 相似文献
To separate and analyze giant and small proteins in the same electrophoresis gel, we have used a 3–15% polyacrylamide gradient gel containing 2.6% of the crosslinker bisacrylamide and 0.2 M of Tris‐acetate buffer (pH 7.0). Samples were prepared in a sample buffer containing lithium dodecyl sulphate and were run in the gel described above using Tris‐Tricine‐SDS‐sodium bisulfite buffer, pH 8.2, as electrophoresis buffer. Here, we show that this system can be successfully used for general applications of SDS‐PAGE such as CBB staining and immunoblot. Thus, by using Tris‐acetate 3–15% polyacrylamide gels, it is possible to simultaneously analyze proteins, in the mass range of 10–500 kDa, such as HERC1 (532 kDa), HERC2 (528 kDa), mTOR (289 kDa), Clathrin heavy chain (192 kDa), RSK (90 kDa), S6K (70 kDa), β‐actin (42 kDa), Ran (24 kDa) and LC3 (18 kDa). This system is highly sensitive since it allows detection from as low as 10 μg of total protein per lane. Moreover, it has a good resolution, low cost, high reproducibility and allows for analysis of proteins in a wide range of weights within a short period of time. All these features together with the use of a standard electrophoresis apparatus make the Tris‐acetate‐PAGE system a very helpful tool for protein analysis. 相似文献
(-)-Sparteine induced lithiation of primary 2,4,6-triisopropylbenzoates and subsequent homologation of boronic esters is reported. A comparative study with lithiated N,N-diisopropylcarbamates has demonstrated the superiority of the hindered benzoate. 相似文献
This feature article deals with the self assembly and physical chemistry of polyelectrolytes: multilayers and brushes. The article highlights the interesting behavior of polyelectrolytes in nanoscale assemblies, giving more insight into the complexity of the formation of the assemblies. The water content of multilayers and brushes is studied during the assembly and in different ionic strengths. Similarities are found in the behavior of the brushes and multilayers with ionic strength, with regard to changes in the thickness and the water content. An invariance of the zeta potential with ionic strength is also observed for both systems, which can be explained as a result of conformational changes of the polymer chains. Finally, the combination of brushes and multilayers for surface modification is presented. 相似文献
Metal nanoclusters (NCs) are considered ideal nanomaterials for biological applications owing to their strong photoluminescence (PL), excellent photostability, and good biocompatibility. This study presents a simple and versatile strategy to design proteins, via incorporation of a di‐histidine cluster coordination site, for the sustainable synthesis and stabilization of metal NCs with different metal composition. The resulting protein‐stabilized metal NCs (Prot‐NCs) of gold, silver, and copper are highly photoluminescent and photostable, have a long shelf life, and are stable under physiological conditions. The biocompatibility of the clusters was demonstrated in cell cultures in which Prot‐NCs showed efficient cell internalization without affecting cell viability or losing luminescence. Moreover, the approach is translatable to other proteins to obtain Prot‐NCs for various biomedical applications such as cell imaging or labeling. 相似文献
Inorganic mercury and methylmercury are determined in natural waters by injecting the filtered samples onto a low cost commercial flow injection system in which an anion exchange microcolumn is inserted after the injection loop (FIA-IE). If hydrochloric acid is used as the carrier solution, the HgCl4(2-) species (inorganic mercury) will be retained by the anion exchanger while the CH3HgCI species (methylmercury) will flow through the resin with negligible retention. Four anion exchangers and seven elution agents were checked, in a batch mode, to search for the best conditions for optimal separation and elution of both species. Dowex M-41 and L-cysteine were finally selected. Mercury detection was performed by cold vapour-electrothermal atomic adsorption spectrometry (HG-ETAAS). Both systems were coupled to perform the continuous on-line separation/detection of both inorganic mercury and methylmercury species. Separation and detection conditions were optimized by two chemometric approaches: full factorial design and central composite design. A limit of detection of 0.4 microg L(-1) was obtained for both mercury species (RSD < 3.0% for 20 microg L(-1) inorganic and methylmercury solutions). The method was applied to mercury speciation in natural waters of the Nerbioi-lbaizabal estuary (Bilbao, North of Spain) and recoveries of more than 95% were obtained. 相似文献
A complete study of several English polychromed alabaster sculptures is presented. The support, pigment, and binders were
characterised by combining μEDXRF, μRaman, and FTIR spectroscopies. Among the pigments, minium, vermilion, lead white, carbon
black, red iron oxide, and a degraded green copper pigment were determined, together with gold leaf. The presence of the rare
mineral moolooite (copper oxalate) was also found as a degradation product in the green areas, where weddellite (calcium oxalate
dihydrate) was also determined. These facts, together with degradation of the green copper pigment, suggest microbiological
degradation of the original materials. Remains of glue and a varnish were also determined by FTIR spectroscopy and principal-components
analysis (PCA) of the spectra. Finally, PCA analysis was carried out to confirm whether the pieces came from the same quarry. 相似文献