Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Determination of the gamma self-attenuation correction factors using intensity ratios

Summary The possible correlation between the self-attenuation correction in gamma-spectrometric assay of uranyl nitrate samples and spectral line intensity ratios was investigated experimentally and simulated numerically using MCNP code. The characteristic gamma- and X-lines of uranium were measured using a low energy Ge gamma-spectrometer. The simulation results agreed with the experimental data and showed obvious correlation between the self-attenuation correction and the intensity ratios [(185.7 keV)/(143.8 keV), (98.44 keV)/(185.7 keV) and (185.7 keV)/(63.23 keV)]. This correlation greatly simplifies the determination of the self-attenuation correction and reduces the troublesome traditional procedures used to determine this coefficient.     

Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Metal-Assisted Oxidative Cyclization of Arylamidrazones I. Synthesis of 3-Acetyl-1,4-dihydro-1-phenyl-1,2,4-benzotriazine

In the presence of RuCl₃, N-phenylamidrazone underwent oxidative cyclization into 1,4-dihydro-1-phenyl-1,2,4-benzotriazine, the structure of which is established by spectral and X-ray diffraction data.     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.     

Indirect photomeric detection of anions in capillary electrophoresis using dyes as probes and electrolytes buffered with an isoelectric ampholyte

The use of highly absorbing anionic dyes as probes and isoelectric ampholytes as buffers in background electrolytes (BGEs) combined with the use of a light emitting diode (LED) as a light source has been studied for ultrasensitive indirect photometric detection in capillary electrophoresis (CE). Potential dyes and buffers were evaluated based on characteristics relevant to indirect photometric detection principles, such as the electrophoretic mobility of the probe dye, its solubility and adsorption behaviour, and the isoelectric point and buffering capacity of the ampholytic buffer. Two dyes, tartrazine and naphthol yellow S, and histidine as the ampholytic buffer, were selected for detailed investigation. Purification of the probes was vital to avoid anionic impurities interfering with the detection. For the electrolytes containing a purified probe (0.5 mM) and histidine as the isoelectric buffer (p/ 7.7), hydroxypropylmethyl cellulose (approximately 0.05%) was effective in suppression of the electroosmotic flow (EOF). Analytical method performance characteristics were determined. For both probes, experimentally determined mobilities were generally close to literature values, excellent peak shapes and separation efficiencies of up to 298 000 theoretical plates were obtained, and detection limits were generally at the sub-microM level. For the naphthol yellow S-histidine BGE, linearity and reproducibility were also evaluated, with excellent linearity being observed over a range of 5-500 microM, and reproducibility (relative standard deviation, RSD) less than 1% for migration times and 2-8% for normalised peak areas. The approach developed was applied successfully to several real samples including tap water, mineral waters, and beer.     

KMo5O13 and KNb1.76Sb3.24O13

The title compounds, potassium pentamolybdenum oxide, KMo₅O₁₃, and potassium niobate antimonate or potassium niobium antimony oxide (1/1.76/3.24), KNb_1.76Sb_3.24O₁₃, were synthesized by solid‐state reactions and are isomorphous in space group Cmcm. The structure of the Mo complex has three unique Mo atoms and consists of MoO₆ octahedra sharing edges to form Mo₂O₆ pairs and Mo₃O₉ triplets, which, in turn, form layers by sharing corners. These layers are linked together in the [100] direction, yielding a three‐dimensional network similar to that of KSb₅O₁₃. This framework delimits interconnected tunnels, running approximately along the [110] and [10] directions, in which K⁺ ions are located. In the isomorphous KNb_1.76Sb_3.24O₁₃ structure, one of the Mo sites in KMo₅O₁₃ is replaced by Sb and the other two Mo sites have been replaced by Nb/Sb.     

Highly Efficient and Practical Syntheses of Lavendamycin Methyl Ester and Related Novel Quinolindiones

The novel 7-(N-formyl-, 7-(N-acetyl-, and 7-(N-isobutyrylamino)-2-methylquinoline-5,8-diones were synthesized in excellent overall yields in three steps via the nitration of the commercially available 8-hydroxy-2-methylquinoline followed by a reduction-acylation step and then oxidation. Acid hydrolysis of 7-(N-acetylamino)-2-methylquinoline-5,8-dione (14a) afforded the novel 7-aminoquinoline-5,8-dione 7 in excellent yields. Due to our efficient preparation of dione 14a, we now report a short and practical method for the total synthesis of the potent antitumor agent lavendamycin methyl ester (1b) with an excellent overall yield.     

New conductivity detection response equation for anions eluted with fully and partially ionised eluents in non-suppressed ion chromatography

A response equation for conductivity detection in ion chromatography has been derived. This equation is applicable to non-suppressed ion chromatography using both fully ionised and partially ionised eluents. A prime assumption of this equation is that when partially ionised eluents are used (such as benzoic acid), both the ionised and neutral components of the eluent species contribute to the detector response of anionic analytes. Experimental evidence is provided to support this assumption in that pH changes accompanying the elution of an analyte have been measured. These pH changes are proportional to the concentration of analyte injected onto the column, in accordance with predictions from the response equation. Furthermore, it is shown that protonated eluents (such as benzoic acid) give more sensitive detection than equivalent ionised eluents (such as potassium benzoate) and the signal enhancement achieved using a protonated eluent species is in accordance with theory.     

Prediction of retention times for anions in linear gradient elution ion chromatography with hydroxide eluents using artificial neural networks

The feasibility of using an artificial neural network (ANN) to predict the retention times of anions when eluted from a Dionex AS11 column with linear hydroxide gradients of varying slope was investigated. The purpose of this study was to determine whether an ANN could be used as the basis of a computer-assisted optimisation method for the selection of optimal gradient conditions for anion separations. Using an ANN with a (1, 10, 19) architecture and a training set comprising retention data obtained with three gradient slopes (1.67, 2.50 and 4.00 mM/min) between starting and finishing conditions of 0.5 and 40.0 mM hydroxide, respectively, retention times for 19 analyte anions were predicted for four different gradient slopes. Predicted and experimental retention times for 133 data points agreed to within 0.08 min and percentage normalised differences between the predicted and experimental data averaged 0.29% with a standard deviation of 0.29%. ANNs appear to be a rapid and accurate method for predicting retention times in ion chromatography using linear hydroxide gradients.