Stereochemical assignments of aldol products of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones by 1H NMR

The aldol reactions of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones with benzaldehyde carried out at ?78 °C were found to produce sec‐carbinols. Intramolecular hydrogen bonding within the aldol products forming a six‐membered ring enabled the assignment of stereochemistries of the major and minor diastereomers via analysis of the syn and anti ³J_H,H ¹H NMR coupling constants. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of Green Apple (Golden Delicious) and Its Three Major Flavonols Consumption on Obesity,Lipids, and Oxidative Stress in Obese Rats

Obesity is becoming increasingly common all over the world and global strategies are accordingly being developed to prevent it. In order to support the strategies, the effects of green apple (Golden Delicious) and the consumption of its three major flavonols (quercetin-3-glucoside, quercetin-3-D-galactoside, and quercetin-3-rhamnoside) on body weight; the weight of liver, kidney, and spleen; some lipid parameters in serum; and total lipid ratios of liver and kidney and oxidative stress parameters of obese rats were studied. This study was conducted on two experimental groups: one of which was given an apple, and the other was given flavonols, in addition to their high-energy diet; along with a sham and a control rat group, for 4 weeks. According to results, there was no difference in body and organ weights between groups. The liver and kidney weights increased in obese rats, but there was no difference between the total lipid ratios in these organs. The addition of green apple and selected flavonols to the high-energy diet of rats was not sufficient to prevent the increase in body and organ weights, but it supported the reduction in some lipid fractions and in oxidative stress parameters of obese rats. Moreover, this study supported the argument that obesity causes most of the lipid fractions increase in serum and induces oxidative stress.     

Charging/discharging of Au (core)/silica (shell) nanoparticles as revealed by XPS

By recording XPS spectra while applying external voltage stress to the sample rod, we can control the extent of charging developed on core-shell-type gold nanoparticles deposited on a copper substrate, in both steady-state and time-resolved fashions. The charging manifests itself as a shift in the measured binding energy of the corresponding XPS peak. Whereas the bare gold nanoparticles exhibit no measurable binding energy shift in the Au 4f peaks, both the Au 4f and the Si 2p peaks exhibit significant and highly correlated (in time and magnitude) shifts in the case of gold (core)/silica (shell) nanoparticles. Using the shift in the Au 4f peaks, the capacitance of the 15-nm gold (core)/6-nm silica (shell) nanoparticle/nanocapacitor is estimated as 60 aF. It is further estimated that, in the fully charged situation, only 1 in 1000 silicon dioxide units in the shell carries a positive charge during our XPS analysis. Our simple method of controlling the charging, by application of an external voltage stress during XPS analysis, enables us to detect, locate, and quantify the charges developed on surface structures in a completely noncontact fashion.     

A novel bidentate ligand containing oxime,hydrazone and indole moieties and its BF2+ bridged transition metal complexes and their efficiency against prostate and breast cancer cells

In this study, a novel bidentate ligand containing oxime, hydrazone, and indole moieties and its BF₂⁺-bridged transition metal complexes [Ni(II), Cu(II), and Co(II)] were synthesized and their cytotoxic activities against prostate and breast cancer cells were investigated. The vic-dioxime ligand bearing indole–hydrazone side groups was synthesized by reacting antiglyoximehydrazine (GH₂) with 3-methoxy indole. The ligand forms mononuclear complexes with a metal-to-ligand ratio of 1:2 with M = Co(II)(H₂O)₂, Ni(II), and Cu(II). These metal complexes were then reacted with BF₃(C₂H₅)₂O to obtain BF₂⁺-bridged transition metal complexes. The Co(II) complex of the ligand is proposed to be octahedral with water molecules as axial ligands, whereas the Ni(II) and Cu(II) complexes are proposed to be square planar. Spectral studies showed that the ligand bonded to the metal ion in a neutral bidentate fashion through the azomethine nitrogen atom and the imine oxime group. Structural assignments are supported by a combination of ¹H nuclear magnetic resonance (NMR), ¹³C NMR, Fourier-transform infrared, LC/MS, elemental analyses, and magnetic susceptibility testing. For determining the cytotoxic effects of the novel anticancer products, cancer cells were cultured. The antiproliferative effects were determined using the MCF-7 breast cancer and PC-3 prostate cancer cell lines. The antiproliferative effects of the products were analyzed and their apoptotic or necrotic effects were determined with the Hoechst/propidium iodide double staining method in both cancer cell lines. Paclitaxel was used as the positive control (1 μm ). The results indicated that the newly synthesized compounds are effective on both cell lines between concentrations of 5 and 40 μm and show their effects by apoptotic mechanisms. Besides, these products were found to be more effective on the MCF-7 cell line. The cytotoxic efficiency of the newly synthesized products was more than that of paclitaxel (depending on concentration), which is a chemotherapeutic agent used in cancer therapy.     

Memristor-based oscillatory behavior in the FitzHugh–Nagumo and Hindmarsh–Rose models

Nonlinear Dynamics - The neural firing activities related to information coding maintaining the information transmission vary qualitatively considering the electromagnetic induction. The firing of...     

End‐functionalized polylactides using a calcium‐based precatalyst: Synthesis and insights by mass spectrometry

A simple and convenient method for the synthesis of end functionalized polylactides (PLAs) under mild conditions by ring opening polymerization (ROP) in the absence of potentially toxic catalysts is described. Various alcohols were used as initiators in combination with Ca[N(SiMe₃)₂]₂(THF)₂ as the precatalyst in THF at room temperature. Tailored end functionalities were obtained in a controlled fashion. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐ToF‐MS) and electrospray ionization quadrupole time of flight mass spectrometry (ESI‐Q‐ToF‐MS) analysis were performed to investigate the end groups. The results confirmed that the end group fidelity was maintained in the isolated PLAs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 437–448     

Solvent‐Catalyzed Ring–Chain–Ring Tautomerization in Axially Chiral Compounds

The mechanism of ring–chain–ring tautomerization and the prominent effect of the solvent environment have been computationally investigated in an effort to explain the enantiomeric interconversion observed in 2‐oxazolidinone derivatives, heterocyclic analogues of biphenyl atropisomers, which were isolated as single stable enantiomers and have the potential to be used as axially chiral catalysts. This study has shed light on the identity of the intermediate species involved in the ring–chain–ring tautomerization process as well as the catalytic effect of polar protic solvents. These mechanistic details will prove very useful in predicting and understanding ring–chain tautomeric equilibria in similar heterocyclic systems and will further enable experimentalists to devise appropriate experimental conditions in which axially chiral catalysts remain stable as single enantiomers.     

exo-Selective inverse-electron-demand hetero Diels–Alder reactions of norbornene with 5-benzylidine-2-arylimino-3-aryl-thiazolidine-4-thiones at room temperature

2-Arylimino-3-aryl-thiazolidine-4-thiones were synthesized from the corresponding thiazolidine-4-ones using Lawesson's reagent (LR) and converted into 5-benzylidine-2-arylimino-3-aryl-thiazolidine-4-thiones by reaction with benzaldehyde, which were then used as heterodienes in the inverse-electron-demand hetero Diels–Alder cycloadditions with norbornene as a dienophile at 25 ^°C. The reactions with norbornene were found to proceed with 100% exo-selectivity as determined by NMR experiments. The hetero Diels–Alder reactions with axially chiral heterodienes with ΔG^#>116 kJ/mol showed kinetic atroposelectivities up to 11:1. However, the products were found to equilibrate, as revealed by the 97.1 kJ/mol barrier to hindered rotation of the most sterically hindered product, to produce 2:1 diastereoselectivities after the 24 h reaction time.     

pH-labile sheddable block copolymers by RAFT polymerization: Synthesis and potential use as siRNA conjugates

Well-defined amphiphilic block copolymers composed of hydrophilic and hydrophobic blocks linked through an acid-labile acetal bond were synthesized directly by RAFT polymerization using a new poly(ethylene glycol) (PEG) macroRAFT agent modified with an acid-labile group at its R-terminal. The new macroRAFT agent was used for polymerization of poly(t-butyl methacrylate) (PtBMA) or poly(cholesterol-methacrylate) (PCMA) to synthesize well-defined block copolymers with a PEG block sheddable under acidic conditions. The chain extension polymerization kinetics showed known traits of RAFT polymerization. The molecular weight distributions of the copolymers prepared using the new macroRAFT agent remained below 1.2 during the polymerizations and the molecular weight of the copolymers was linearly proportional to monomer conversions. The acid-catalyzed hydrolysis behavior of the PEG-macroRAFT agent and the PEG-b-PtBMA (Mn = 13,600 by GPC, PDI = 1.10) was studied by GPC, ¹H NMR and UV–vis spectroscopy. The half-life of acid-hydrolysis was 70 min at pH 2.2 and 92 h at pH 4.0. The potential use of the pH-labile shedding behavior of the copolymers was demonstrated by conjugating a thiol-modified siRNA to ω-pyridyldisulfide modified PEG-b-PCMA. The resultant PEG-b-PCMA-b-siRNA triblock modular polymer released PCMA-b-siRNA segment in acidic and siRNA segment in reductive conditions, as confirmed by polyacrylamide gel electrophoresis.     

Computational Methods for MOF/Polymer Membranes

Metal–organic framework (MOF)/polymer mixed matrix membranes (MMMs) have received significant interest in the last decade. MOFs are incorporated into polymers to make MMMs that exhibit improved gas permeability and selectivity compared with pure polymer membranes. The fundamental challenge in this area is to choose the appropriate MOF/polymer combinations for a gas separation of interest. Even if a single polymer is considered, there are thousands of MOFs that could potentially be used as fillers in MMMs. As a result, there has been a large demand for computational studies that can accurately predict the gas separation performance of MOF/polymer MMMs prior to experiments. We have developed computational approaches to assess gas separation potentials of MOF/polymer MMMs and used them to identify the most promising MOF/polymer pairs. In this Personal Account, we aim to provide a critical overview of current computational methods for modeling MOF/polymer MMMs. We give our perspective on the background, successes, and failures that led to developments in this area and discuss the opportunities and challenges of using computational methods for MOF/polymer MMMs.