Specular reflectance of cold-rolled aluminum surfaces

The specular reflectance of cold-rolled aluminum surface is studied using a fiber optic system. An approximation for the determination of surface roughness is presented.     

Multi-scale study of the mineral porosity of veined gneiss and pegmatitic granite from Olkiluoto,Western Finland

The purpose of this work was to support the long-term experiments for investigation of rock matrix retention properties at the spent nuclear fuel repository site ONKALO, in Olkiluoto, Western Finland. Towards this end, rock samples were characterised in terms of porosity connected to mineralogy, with emphasis on pore sizes, and fillings. Both filled and unfilled pores were found with unfilled pores being majority in the pegmatitic granite veins of the mostly veined gneiss samples. It was found that the fillings were often connected to local alteration and the alteration caused variation in the range of pore sizes.     

Optical aperture area determination for accurate illuminance and luminous efficacy measurements of LED lamps

The measurement uncertainty of illuminance and, consequently, luminous flux and luminous efficacy of LED lamps can be reduced with a recently introduced method based on the predictable quantum efficient detector (PQED). One of the most critical factors affecting the measurement uncertainty with the PQED method is the determination of the aperture area. This paper describes an upgrade to an optical method for direct determination of aperture area where superposition of equally spaced Gaussian laser beams is used to form a uniform irradiance distribution. In practice, this is accomplished by scanning the aperture in front of an intensity-stabilized laser beam. In the upgraded method, the aperture is attached to the PQED and the whole package is transversely scanned relative to the laser beam. This has the benefit of having identical geometry in the laser scanning of the aperture area and in the actual photometric measurement. Further, the aperture and detector assembly does not have to be dismantled for the aperture calibration. However, due to small acceptance angle of the PQED, differences between the diffraction effects of an overfilling plane wave and of a combination of Gaussian laser beams at the circular aperture need to be taken into account. A numerical calculation method for studying these effects is discussed in this paper. The calculation utilizes the Rayleigh–Sommerfeld diffraction integral, which is applied to the geometry of the PQED and the aperture. Calculation results for various aperture diameters and two different aperture-to-detector distances are presented.     

GC–MS with photoionization of cold molecules in supersonic molecular beams—Approaching the softest ionization method

A new type of photoionization ion source was developed for the ionization of cold molecules in supersonic molecular beams (named Cold PI). The system was based on a GC–MS with supersonic molecular beams and its fly‐through EI of cold molecules ion source (Cold EI) plus quadrupole mass analyzer. A continuously operated deuterium VUV photoionization lamp was added and placed above and between the supersonic nozzle and skimmer whereas the Cold EI ion source served only as a portion of the ion transfer ion optics. The supersonic nozzle and skimmer were voltage biased and the VUV light crossed the supersonic expansion about 10 mm from the nozzle. We obtained over three orders of magnitude enhancement in the relative abundance of the molecular ion of squalane in Cold PI versus in photoionization of this compound as a thermal compound. Accordingly, we also proved that standard photoionization is not as soft ionization method as previously perceived for large compounds. We found that Cold PI is as soft as and possibly softer than field ionization; thus, it could be the softest known ionization method. The ionization yield was about 200–300 times weaker than with Cold EI yet our limit of detection was about 200 femtogram in SIM mode for cholesterol and pyrene which is reasonable. Practically, all hydrocarbons gave only molecular ions with rather uniform response whereas alcohols gave some molecular ions plus major fragment ions particularly with a loss of water (similarly to field ionization). We tested Cold PI in the GC–MS analysis of diesel fuels and analyzed the time averaged data for group type information. We also found that we can analyze the diesel fuels by fast under 20‐s flow injection analysis in which the generated averaged mass spectrum of molecular ions only could serve for the characterization of fuels.     

In situ migration of tritiated water and iodine in Grimsel granodiorite,part II: assessment of the diffusion coefficients by TDD modelling

Diffusive transport of iodine (I) and tritiated water (HTO) in granodiorite is studied in the framework of the long term diffusion project (LTD) at the Grimsel Test Site, Switzerland. In this paper we modelled the tracer profiles measured in a long term (780 days) in situ diffusion test was carried out as part of LTD. The main outcome of the modelling tends to prove that the in situ apparent diffusion coefficients of I and HTO are close to the reference apparent diffusion coefficient determined in the laboratory (D _a = 3 × 10⁻¹⁰ m² s⁻¹).

     

Gravitational redshift experiments with the high-resolution Mössbauer resonance in67Zn

A gravitational tedshift (GRS) experiment using the high-resolution Mössbauer resonance in⁶⁷Zn is described. The tiny Doppler motion of the source can be checked by a dc-SQUID based displacement sensor. The results on the GRS strongly indicate that solid-state effects, which are difficult to control experimentally, finally limit the accuracy that Mössbauer measurements can provide in determining the GRS. We argue that for this reason conventional Mössbauer experiments most probably will not be able to compete with other methods in future GRS measurements of very high precision.