High reliability atomic absorption spectrometry of major and minor elements in biological materials

Summary Reliable analytical information is of fundamental importance for decisions of far-reaching impact in many regulatory, medical and scientific areas and disciplines. It is however at times elusive. Although the technique of atomic absorption spectrometry (AAS) as become widely established in analytical laboratories throughout the world for the determination of inorganic elements, only few AAS-based methods have reached official status and even fewer have attained reference method status. Research is underway to delineate impacts of a number of parameters on method performance to lead to protocols for standard and reference flame AAS (FAAS) methods for the reliable measurement of major and minor levels of elements of nutritional and toxicological pertinence in clinical and biological materials. Factors investigated include preparation of standards, calibration techniques, sampling and sample decomposition, solution preparation, instrumental parameters, and measurement protocols. Examples of some pronounced effects of sample decomposition and calibration techniques are presented as well as indications of the excellent performance of well-applied AAS procedures determined by use of standard reference materials and comparison with other techniques of analysis. Reference will be made to the determination of the major and minor nutrient elements Na, K, Mg, Ca, Mn, Fe, Cu and Zn in plant biological reference materials.Formerly at Plant Research Centre, Agriculture Canada, Ottawa, Ontario K1A OC6, CanadaContribution No. 1030 from Plant Research Centre     

Mapping of possible prion protein self-interaction domains using peptide arrays

Background  

The common event in transmissible spongiform encephalopathies (TSEs) or prion diseases is the conversion of host-encoded protease sensitive cellular prion protein (PrP^C) into strain dependent isoforms of scrapie associated protease resistant isoform (PrP^Sc) of prion protein (PrP). These processes are determined by similarities as well as strain dependent variations in the PrP structure. Selective self-interaction between PrP molecules is the most probable basis for initiation of these processes, potentially influenced by chaperone molecules, however the mechanisms behind these processes are far from understood. We previously determined that polymorphisms do not affect initial PrP^C to PrP^Sc binding but rather modulate a subsequent step in the conversion process. Determining possible sites of self-interaction could elucidate which amino acid(s) or amino acid sequences contribute to binding and further conversion into other isoforms. To this end, ovine – and bovine PrP peptide-arrays consisting of 15-mer overlapping peptides were probed with recombinant sheep PrP^C fused to maltose binding protein (MBP-PrP).     

Use of an automated image processing program to quantify recombinant adenovirus particles.

Electron microscopy has a pivotal role as an analytical tool in pharmaceutical research. However, digital image data have proven to be too large for efficient quantitative analysis. We describe here the development and application of an automated image processing (AIP) program that rapidly quantifies shape measurements of recombinant adenovirus (rAd) obtained from digitized field emission scanning electron microscope (FESEM) images. The program was written using the macro-recording features within Image-Pro Plus software. The macro program, which is linked to a Microsoft Excel spreadsheet, consists of a series of subroutines designed to automatically measure rAd vector objects from the FESEM images. The application and utility of this macro program has enabled us to rapidly and efficiently analyze very large data sets of rAd samples while minimizing operator time.     

Atomic absorption spectrometric determination of selenium with carbon furnace atomization

A Varian Techtron model 63 carbon rod atomizer is used for the atomic absorption spectrometric determination of nanogram quantities of selenium. The pronounced interferences from the matrices in biological digests can be obviated by isolating selenium from sample matrices by precipitation with ascorbic acid. The precision of the determination is improved by incorporating 5000 μg Ni ml^?1 in the analytical solutions. Selenium at μg g^?1 and sub-μg g^?1 levels in a variety of biological samples can be determined. The detection limit is 25 ng Se g^?1.     

Studies on photoinduced effects in pulse-electrodeposited Ag/Hg-1212/CdSe hetero-nanostructures

Metal/superconductor/semiconductor (Ag/Hg-1212/CdSe) hetero-nanostructures have been fabricated using pulse-electrodeposition technique and are characterized by X-ray diffraction (XRD), full-width at half-maximum (FWHM) and scanning electron microscopy (SEM) studies. The junction capacitance of Ag/Hg-1212, Hg-1212/CdSe and Ag/Hg-1212/CdSe heterojunctions is measured in dark and under laser irradiation at room temperature. The nature of the junction formed and built-in-junction potentials were determined. The increase in carrier concentration across the junction due to photo-irradiation has been observed.     

Preliminary assessment of homogeneity of new candidate agricultural/food reference materials

Summary In an effort to bring to the analytical community new natural matrix reference materials (RM's) for elemental composition quality control, ten new agricultural/food candidate reference materials prepared previously, were characterized for homogeneity. The materials include bovine muscle powder, whole egg powder, corn bran, microcrystalline cellulose, wheat gluten, whole milk powder, corn starch and three wheat flours representing a wide range of matrix types and elemental composition. Characterization was for up to some twenty five major, minor, trace and ultratrace elements of nutritional, toxicological and environmental significance. Solid sampling electrothermal atomic absorption spectrometry was applied to the determination of copper and lead in sub-milligram subsamples. A variety of other analytical techniques via an interlaboratory cooperative effort was used to determine many other elements in 100–2000 mg subsample sizes. Good material homogeneity was observed for virtually all materials and analytes with the exception of Cr and Pb in limited instances. The materials were thus deemed suitable for detailed characterization of elemental concentration to lead to recommended values and to bring these biological products to reference material status.     

Effect of laser irradiation of C-V characteristics of electrodeposited Ag/Tl-2223/CdSe hetero-nanostructures

One of the innovative technological directions for the high-temperature superconductors has been persued by fabricating the heteroepitaxial multilayer structures such as superconductor-semiconductor heterostructures. In the present investigation, metal/superconductor/semiconductor (Ag/Tl-2223/CdSe) hetero-nanostructures have successfully been fabricated using dc electrodeposition technique and were characterized by X-ray diffraction (XRD), full-width at half-maximum (FWHM) and scanning electron microscopy (SEM) studies. The measurement of junction capacitance as a function of biasing voltage was used for the estimation of junction built-in-potential (V _D) and to study the charge distribution in a heterojunction. The Mott-Schottky plots were measured for each junction in dark and under the photo-irradiation. The effect of laser irradiation on C-V characteristics of hetero-nanostructure has been studied.     

Characterization (certification) of three wheat flours and a wheat gluten reference material (NIST RM 8436, 8437, 8438 and 8418) for essential and toxic major, minor and trace element constituents

Summary Three wheat flours, Durum Wheat Flour (NIST RM 8436), Hard Red Spring Wheat Flour (NIST RM 8437), Soft Winter Wheat Flour (NIST RM 8438) and Wheat Gluten (NIST RM 8418) Reference Materials were characterized for essential and toxic major, minor and trace elemental composition by analysts in an interlaboratory cooperative characterization campaign. Extensive application of widely varied analytical methods yielded 16–27 best estimate and 3–8 informational concentration values for each of these materials. These reference materials are intended for analytical quality control of element determinations in flour and flour products as well as other agricultural/food materials with related matrices.Contribution No. 92–145 from Centre for Land and Biological Resources Research     

Blending chitosan with polycaprolactone: porous scaffolds and toxicity

The preparation and characterization of porous scaffolds from chitosan-PCL blends by freeze extraction, freeze gelation and freeze drying is reported. Using freeze extraction, stable structures were obtained only from PCL, but these were not porous. No stable scaffolds were obtained using the freeze gelation process. Stable scaffolds of chitosan/PCL mixtures could not be obtained using 77% acetic acid by any of these techniques. With 25% aqueous acetic acid, stable scaffolds of chitosan/PCL mixtures were obtained by the freeze drying technique. The stability and pore morphology of freeze dried scaffolds were dependent on the relative mass ratio of chitosan and PCL. A chorioallantoic membrane assay showed that formed 3D chitosan/PCL mixtures were not toxic to vasculature.