Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

An observation of electron phase transition in SmB6 at low temperatures

In order to reveal the nature of the ground state of archetypal intermediate-valence compound SmB₆, a comprehensive study of its transport and magnetic properties was carried out on high-quality single crystals at temperatures of 1.8-300 K in magnetic fields up to 7 T. A drastic enhancement of negative magnetoresistance was observed below 14 K, with the maximum absolute value of Δρ/ρB²∼2.2×10⁻³ T⁻² at T≈5.2 K. This effect seems to be attributable to anomalous magnetic scattering of many-body (exciton-polaronic) complexes induced by fast valence fluctuations on Sm sites. The observed anomalies of magnetotransport, thermoelectric and magnetic characteristics are discussed in terms of electron phase transition to the coherent state of interacting many-body complexes occurring at T^*∼5 K.     

Spectroscopic characterization of mineral crystals produced by the bacterium Azospirillum brasilense

The results of spectroscopic structural and trace elemental analyses of mineral crystals produced by the soil nitrogen-fixing bacterium Azospirillum brasilense cultivated in a synthetic medium are presented and discussed. The mineral formed is shown to have a structure close to struvite (MgNH(4)PO(4) x 6H(2)O; ASTM file No. 15-762) with some differences which may be attributed to the presence of isomorphic admixtures of other cations (struvite is known to have a variety of forms). AAS/AES and ion chromatography analyses for a number of biologically important microelements and their role in the formation of the crystal structure, as well as some questions related to biomineralization are also discussed.     

Reaction of the dimethoxyaminyl radical with tertiary nitrosoalkanes as a method for the preparation of N-alkyl-N′-methoxydiazene N-oxides

The reaction of the dimethoxyaminyl radical with functionally substituted nitrosoalkanes (2) in a 2:1 ratio at 20°C gives the corresponding N-alkyl-N-methoxydiazene N-oxides (3) as a single isomer in preparative yields.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2443–2445, October, 1992.     

Nonclassical titanocene silyl hydrides

The titanocene silyl hydride complexes [Ti(Cp)2(PMe3)(H)(SiR3)] [SiR3=SiMePhCl (6), SiPh2Cl (7), SiMeCl2 (8), SiCl3 (9)] were prepared by HSiR3 addition to [Ti(Cp)2(PMe3)2] and were studied by NMR and IR spectroscopy, X-ray diffraction (for 6, 8, and 9), and DFT calculations. Spectroscopic and structural data established that these complexes exhibit nonclassical Ti-H-Si-Cl interligand hypervalent interactions. In particular, the observation of silicon-hydride coupling constants J(Si,H) in 6-9 in the range 22-40 Hz, the signs of which we found to be negative for 8 and 9, is conclusive evidence of the presence of a direct Si-H bond. The analogous reaction of [Ti(Cp)2(PMe3)2] with HSi(OEt)3 does not afford the expected classical silyl hydride complex [Ti(Cp)2(PMe3)(H)[Si(OEt)3]], and instead NMR-silent titanium (apparently TiIII) complex(es) and the silane redistribution product Si(OEt)4 are formed. The structural data and DFT calculations for the compounds [Ti(Cp)2(PMe3)(H)(SiR3)] show that the strength of interligand hypervalent interactions in the chlorosilyl complexes decreases as the number of chloro groups on silicon increases. However, in the absence of an Si-bound electron-withdrawing group trans to the Si-H moiety, a silane sigma complex is formed, characterized by a long Ti-Si bond of 2.658 A and short Si-H contact of 1.840 A in the model complex [Ti(Cp)2(PMe3)(H)(SiMe3)]. Both the silane sigma complexes and silyl hydride complexes with interligand hypervalent interactions exhibit bond paths between the silicon and hydride atoms in Atoms in Molecules (AIM) studies. To date a classical titanocene phosphane silyl hydride complex without any Si-H interaction has not been observed, and therefore titanocene silyl hydrides are, depending on the nature of the R groups on Si, either silane sigma complexes or compounds with an interligand hypervalent interaction.     

Adhesion properties of a silicon-containing calcium phosphate coating deposited by RF magnetron sputtering on a heated substrate

Silicon-containing hydroxyapatite coatings 400–700 nm in thickness are prepared by means of radio-frequency (RF) magnetron sputtering on a heated (to 200°C) titanium substrate chemically etched and treated with a pulsed electron beam. The morphology and phase composition of the coating are studied. The morphology and roughness of the composite “calcium-phosphate coating-titanium substrate” differ depending on the treatment procedure of the substrate before deposition. The scratch test method is used to assess the adhesion strength of the coatings formed at different values of bias potential applied to the substrate. It is observed that the adhesion strength of the coating changes with decreasing crystallite size.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.