Studies with dithizone: Part XXI. The Relationship between pH12 and Molar Solubility

The effect of changes of ionic strength on the partition of an analytically important weak acid between a variety of aqueous and immiscible organic phases has been studied with respect to new measurements on dithizone (3-mercapto-1,5-diphenylformazan) and di(p-tolyl)thiocarbazone. A linear relationship has been deduced between the pH at which 50% extraction takes place and S_r,o (the solubility of the reactant in the organic phase), and confirmed by measurements of pH_{$\text{1}\text{2}$}, and S_r,o for a large number of organic solvents. The solubilities of the reagents in water, S_r, are also reported. The form of the relationship between pH and log D, and between pH_{$\text{1}\text{2}$} and log S_r,o is the same whether a solution of dithizone consists of a single species or a mixture of thiol and thione forms in tautomeric equilibrium.     

On describing the steady absorption of brownian particles by a restricted random walk

This paper is concerned with idealizing brownian motion as a random walk, using the diffusion equation, and finding the boundary condition at an absorbing surface - all with an eye towards chemical kinetics. Three models of random walk (due to Smoluchowski, Fermi, and Lorentz) are considered, and it is concluded that the lorentzian model is the most appropriate.     

Spectrophotometric determination ofo- andp-phenylenediamines

Summary Cupric chloride-triphenylphosphine complex gives red color witho-phenylenediamine having maximum absorption at 505–520 nm and 0.5g/ml as visual limit of identification. The reaction is specific foro-phenylenediamine and obeys Beer's law (1 to 10g/ml). This reaction provides the basis of a new method for the Spectrophotometric determination ofo-phenylenediamine ing quantities.Ruthenium trichloride-triphenylphosphine complex gives blue color withp-phenylenediamine having maximum absorption at 580 nm and 2g/ml as visual limit of identification. On the basis of this color reaction a Spectrophotometric method for the determination ofp-phenylenediamine in hair dyes is described. The recovery of the dye from commercial preparations is better than 97%. Other organic compounds do not interfere.

---

Zusammenfassung Kupfer(II)chlorid-triphenylphosphin reagiert mito-Phenylendiamin unter Rotfärbung mit maximaler Absorption bei 505 bis 520 nm und 0,5g/ml als Erfassungsgrenze. Die Reaktion ist für o-Phenylendiamin spezifisch und folgt dem Beerschen Gesetz zwischen 1 und 10g/ml. Sie dient als Grundlage für eine neue Methode der spektrophotometrischen Bestimmung von Mikrogrammengen o-Phenylendiamin.Rutheniumtrichlorid-triphenylphosphin reagiert mit p-Phenylendiamin unter Blaufärbung mit maximaler Absorption bei 580 nm und 2g/ml als Erfassungsgrenze. Auf dieser Grundlage läßt sich p-Phenylendiamin in Haarfärbemitteln bestimmen. In handelsüblichen Präparaten werden mehr als 97% des enthaltenen Farbstoffes gefunden. Andere Verbindungen stören nicht.

     

On the long-lived transient absorption observed in nanosecond laser photolysis studies of two polymethine cyanine dyes

It is shown that the long-lived transient absorption which is observed when solutions of cryptocyanine and DDI (1, 1′-diethyl-2, 2′-dicarbocyanine iodide) in methanol and other alcohols are exposed to nanosecond ruby laser pulses arises from a photoproduct whose formation requires consecutive absorption of two photons.     

The thermal dissociation of some metal cupferrate chelates

The thermal dissociation of the cupferron complexes with Cu(II), Ni, Co(II), Zn, Cd, Mn(II), Hg(II), Mg, Ca, Ba, Sr, Al, Fe(III). Ce(III), La, and Nd was studied by differential thermal analysis (DTA) and by pyrolysis into a mass spectrometer. The DTA curves consisted mainly of endothermic peaks although some contained exothermic peaks as well. The mass spectrometer showed that cupferron decomposes slightly above room temperature, giving off N₂, NO, N₂O, NH₃ and H₂O. A mechanism for the thermal dissociation of the coppcr(II) cupferrate is proposed.     

Semiquantitative determination of thiourea,thiocyanate, and sulfide by circular thin layer chromatography

Summary A method for semiquantitative determination of thiourea, thiocyanate, and sulfide is described. It involves making circular spots or rings on chromatoplates using the circular thin layer Chromatographic apparatus. The method is based on sensitivity and specificity of spot reactions and comparison of the color intensity of a circular spot with that of sensitivity standards. The accuracy of the method is ± 5% and the procedure is rapid, simple and economical.

---

Zusammenfassung Ein Verfahren zur halbquantitativen Bestimmung von Thioharnstoff, Thiocyanat und Sulfid wurde beschrieben. Es beruht auf der chromatographischen Herstellung kreisförmiger Flecken oder Ringe auf Dünnschichtplatten. Mit empfindlichen und spezifischen Tüpfelreaktionen wurden die Flecken gefärbt und die Farbintensität mit Standardproben verglichen. Die Genauigkeit beträgt ± 5%.

     

Performance comparison of an 241Am-Be neutron source-based PGNAA setup with the KFUPM PGNAA setup

Monte Carlo calculations have been carried out to compare the performance of an ²⁴¹Am-Be neutron source-based prompt gamma neutron activation analysis (PGNAA) setup with that of the 2.8 MeV neutron-based PGNAA setup at King Fahd University of Petroleum and Minerals (KFUPM) to analyze Portland cement samples. This work is a part of a wide Monte Carlo studies being conducted at KFUPM in search of a more efficient neutron source for its 2.8 MeV neutrons, from the D(d,n) reaction, based PGNAA facility. In this study an ²⁴¹Am-Be neutron source-based PGNAA setup was simulated. For comparison, the diameter of a cylindrical external moderator of the ²⁴¹Am-Be neutron source, based PGNAA setup, was assumed to be similar to that used in the KFUPM PGNAA setup. The results of this study revealed that although the optimum geometry of the ²⁴¹Am-Be neutron source-based setup is similar to that of the KFUPM PGNAA facility, the performance of the ²⁴¹Am-Be neutron source-based setup is slightly poorer than that of the 2.8 MeV neutron-based setup. This revised version was published online in July 2006 with corrections to the Cover Date.     

Blends of starch with ethylene vinyl alcohol copolymers: effect of water,glycerol, and amino acids as plasticizers

Blends of thermoplastic starch with poly(ethylene‐co‐vinyl alcohol) copolymer (EVOH) were melt extruded with water/glycerol as plasticizer and a series of amino acid additives. The biggest factor in end‐use mechanical properties proved to be the relative humidity (RH) during storage. Plasticized starch‐EVOH blends stored at 0 and 50% RH changed significantly over time, with, for example, the tensile strength (TS) of the glycerol‐plasticized blend increasing from 4.7 to 26.3 MPa over 8 weeks when maintained at 0% RH. In contrast, the TS of this same sample stored at 75% RH remained unchanged for 8 weeks. Amino acids provided relatively minor, but significant changes in mechanical properties with time. Based on TS, elongation‐to‐break, and modulus, it may be concluded that β‐alanine, sarcosine, and L ‐proline were more effective than glycerol at maintaining strong flexible blends. Increases in crystallinity and changes in morphology with time, as described by modulated DSC were correlated to these changes in mechanical properties. Published in 2007 by John Wiley & Sons, Ltd.     

Anti-HIV Active Naphthyl Analogues of HEPT and DABO

Summary.  5-Isopropyl-6-naphthyl uracil and 5-isopropyl-6-naphthyl-2-thiouracil were alkylated to give N-1-(ethoxymethyl and methylthiomethyl) uracil and S²-cyclohexyl-thiouracil, respectively. 5-Ethyl-6-naphthyl uracil and 5-ethyl-6-naphthyl-2-thiouracil afforded N-1-(ethoxymethyl, methoxy-methyl, methylthiomethyl, acetoxyethoxy methyl and hydroxyethoxy methyl) uracil and S²-((2,2- diethoxyethyl), methoxycarbonylmethyl, ethoxycarbonylpropyl, methylthiomethyl, ethoxymethyl, methyl and cyclohexyl)-thiouracil upon alkylation. Received September 25, 2001. Accepted (revised) December 3, 2001