全息透镜在车辆中的两种应用

通过把全息透镜嵌入挡风玻璃，实现全息透镜在车辆中的两种应用，即将具有颜色选择性的窄带全息透镜用于车辆的平视显示，将具有角度选择性的宽带全息透镜用于车辆的阳光防护。     

Surface-enhanced Raman study of organic sulfides adsorbed on silver

The surface-enhanced Raman scatterings of dimethyl sulfide, diethyl sulfide and dimethyl disulfide have been investigated in silver sol. The dimethyl disulfide molecule decomposes on silver to the corresponding mercaptide implying facile cleavage of its S---S bond. The C---S bond in dialkyl monosulfide appears not to cleave on silver. For diethyl sulfide, the C₂ conformation seems to be favorable on silver than other conformations.     

β-蒎烯和马来酸酐的反应及产物表征

研究了β-蒎烯和马来酸酐的烯反应、溶剂中自由基共聚反应和本体热共聚反应,得到了β-蒎烯和马来酸酐烯反应产物和共聚产物,并用IR、1H NMR、13C NMR、GPC、DSC进行表征,研究了引发剂浓度、溶剂体系、单体配比、温度等因素对产物的影响.对聚合物进行皂化改性,测量了皂化物浓度对水表面张力的影响.     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Flow-injection chemiluminescence determination of epinephrine in pharmaceutical preparations using raw apple juice as enzyme source

Raw apple juice exhibits the activity of polyphenol oxidase which can be employed for the determination of mono-, di- and polyhydric phenols. The chemiluminescence detection in the two-channel manifold was used to develop the new procedure for determination of epinephrine. Epinephrine can be determined by this method in pharmaceutical preparations in concentration ranges 1.0–10.0 and 10.0–25.0 mg l⁻¹, with a detection limit of 0.2 mg l⁻¹. Good selectivity against typical antioxidants and other coexisting substances was achieved. Relatively slow loss of the enzyme activity was observed during 1 week. The proposed method is very simple. Fresh juice solution from one apple can be prepared in 10 min and used for at least 8 h with excellent precision. Consumption of luminol solution was 0.15 ml min⁻¹. The throughput was 20 samples per hour.     

Anatase-Rutile Transition of Precipitated Titanium Oxide with Alcohol Rinsing

The effect of alcohol washing on the anatase-rutile transition of precipitated titanium oxide was investigated using X-ray powder diffraction, Fourier-transform IR spectroscopy, and thermogravimetry. Alcohol (butanol) rinsing accelerated the anatase-rutile transition of precipitated titanium oxide powder so that the onset temperature of transition decreased drastically from 800 degrees C for water-washed powder to 550 degrees C for alcohol-rinsed powder. Alternation of transition kinetics and mechanisms by rinsing media could be confirmed from the analysis of temperature and time dependence of rutile content. The attributability of the chemical state of anatase after crystallization, which contained H(2)O, OH, and organic residues, to the change of transition kinetics with alcohol rinsing will be discussed. Two mechanisms, the effect of residual organics and/or H(2)O(OH), could be suggested on the basis of analysis of the difference between chemical states of water-washed anatase and alcohol-rinsed powder. Copyright 2000 Academic Press.     

Fluorine-doped nanocrystalline SnO2 powders prepared via a single molecular precursor method as anode materials for Li-ion batteries

Fluorine-doped nanocrystalline tin dioxide materials (F:SnO₂) have been successfully prepared by the sol-gel process from a single molecular precursor followed by a thermal treatment at 450-650 °C. The resulting materials were characterized by FTIR spectroscopy, powder X-ray diffraction, nitrogen adsorption porosimetry (BET) and transmission electron microscopy (TEM). The mean particle size increased from 5 to 20 nm and the specific surface area decreased from 123 to 37 m²/g as the temperature of heat treatment was risen from 450 to 650 °C. Fluorine-doped nanocrystalline SnO₂ exhibited capacity of 560, 502, and 702 mA h/g with 48%, 50%, and 40% capacity retention after 25 cycles between 1.2 V and 50 mV at the rate of 25 mA/g, respectively. In comparison, commercial SnO₂ showed an initial capacity of 388 mA h/g, with only 23% capacity retention after 25 cycles.     

In situ Fe K-edge X-ray absorption fine structure of a nitrosyl adduct of iron phthalocyanine irreversibly adsorbed on a high area carbon electrode in an acidic electrolyte

Key aspects of the microenvironment surrounding the Fe center in the nitrosyl adduct of iron phthalocyanine, [Fe(Pc)(NO)], have been elucidated from the analysis of the Fe K-edge extended X-ray absorption fine structure (EXAFS) of the material adsorbed on the surface of a high area carbon electrode recorded in situ, in 0.5 M H(2)SO(4). Statistical best fits to the EXAFS data place the Fe center in a five-coordinated square pyramidal configuration shifted away from the Pc plane toward the axially bound NO bent at an angle of ca. 40 degrees with respect to the normal to the Pc plane. This environment is analogous to that of Fe in the nitrosyl adduct of crystalline [Fe(TPP)], where TPP = meso-tetraphenylporphyrinato(2-), determined from X-ray diffraction.     

Studies of tetracene- and pentacene-based organic thin-film transistors fabricated by the neutral cluster beam deposition method

The neutral cluster beam deposition (NCBD) method has been applied to produce and characterize organic thin-film transistors (OTFTs) based upon tetracene and pentacene molecules as active layers. Organic thin films were prepared by the NCBD method on hexamethyldisilazane (HMDS)-untreated and -pretreated silicon dioxide (SiO2) substrates at room temperature. The surface morphology and structures for the tetracene and pentacene thin films were examined by atomic force microscopy (AFM) and X-ray diffraction (XRD). The measurements demonstrate that the weakly bound and highly directional neutral cluster beams are efficient in producing high-quality single-crystalline thin films with uniform, smooth surfaces and that SiO2 surface treatment with HMDS enhances the crystallinity of the pentacene thin-film phase. Tetracene- and pentacene-based OTFTs with the top-contact structure showed typical source-drain current modulation behavior with different gate voltages. Device parameters such as hole carrier mobility, current on/off ratio, threshold voltage, and subthreshold slope have been derived from the current-voltage characteristics together with the effects of surface treatment with HMDS. In particular, the high field-effect room-temperature mobilities for the HMDS-untreated OTFTs are found to be comparable to the most widely reported values for the respective untreated tetracene and pentacene thin-film transistors. The device performance strongly correlates with the surface morphology, and the structural properties of the organic thin films are discussed.