Active long pulse shaping technique of pulsed CO2 laser using multi-pulse discharge control

We describe the pulse forming of pulsed CO₂ laser using multi-pulse superposition technique. Various pulse shapes, high duty cycle pulse forming network (PFN) are constructed by time sequence. This study shows a technology that makes it possible to make various long pulse shapes by activating SCRs of three PFN modules consecutively at a desirable delay time with the aid of a PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a high voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage by driving the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence.We investigated various long pulse shapes as different trigger time intervals of SCRs among three PFN modules. As a result, we could obtain laser beam with various pulse shapes and durations from about 250 to 1000 μs.     

A new and convenient synthesis of N-substituted perhydroazepines from adipaldehyde and primary amines with tetracarbonylhydridoferrate,HFe(CO), as a selective reducing agent

Ethanolic tetracarbonylhydridoferrate combined with adipaldehyde is very efficient for the selective transformation of an amino group into perhydroazepine. A large variety of both aliphatic and aromatic amines react with adipaldehyde in the presence of tetracarbonylhydridoferrate at room temperature and carbon monoxide to give the corresponding N-alkyl- and N-arylperhydroazepines in good to excellent yields.     

Quantitative Comparison of the Marker Compounds in Different Medicinal Parts of Morus alba L. Using High-Performance Liquid Chromatography-Diode Array Detector with Chemometric Analysis

It is thought that the therapeutic efficacy of Morus alba L. is determined by its biological compounds. We investigated the chemical differences in the medicinal parts of M. alba by analyzing a total of 57 samples (15 root barks, 11 twigs, 12 fruits, and 19 leaves). Twelve marker compounds, including seven flavonoids, two stilbenoids, two phenolic acids, and a coumarin, were quantitatively analyzed using a high-performance liquid chromatography-diode array detector and chemometric analyses (principal component and heatmap analysis). The results demonstrated that the levels and compositions of the marker compounds varied in each medicinal part. The leaves contained higher levels of six compounds, the root barks contained higher levels of four compounds, and the twigs contained higher levels of two compounds. The results of chemometric analysis showed clustering of the samples according to the medicinal part, with the marker compounds strongly associated with each part: mulberroside A, taxifolin, kuwanon G, and morusin for the root barks; 4-hydroxycinnamic acid and oxyresveratrol for the twigs and skimmin; chlorogenic acid, rutin, isoquercitrin, astragalin, and quercitrin for the leaves. Our approach plays a fundamental role in the quality evaluation and further understanding of biological actions of herbal medicines derived from various medicinal plant parts.     

Anti-Obesity Potential of Ponciri Fructus: Effects of Extracts,Fractions and Compounds on Adipogenesis in 3T3-L1 Preadipocytes

Background: Ponciri Fructus, a crude drug consisting of the dried immature fruits of Poncirus trifoliata (L.) Raf., is a popular folk medicine used for the treatment of allergy and gastrointestinal disorders in Korea and China. In this study, the anti-adipogenic activity of extracts and isolated compounds were evaluated using 3T3-L1 preadipocytes. Methods: Dried immature fruits were extracted and fractionated into n-hexane, ethyl acetate (EtOAc), n-butanol and water-soluble fractions. The ethanol extract and fractions were tested for anti-adipogenic activity in the 3T3-L1 cell line. The active fractions (n-hexane and EtOAc fractions) were further subjected to chromatographic techniques to isolate and identify active compounds. Furthermore, the isolated compounds were evaluated for their anti-adipogenic activity. Results: Altogether, seven compounds, including two flavonoids, one phytosteroid and four coumarin derivatives, were isolated. Ethanol extract, n-hexane fraction, EtOAc fraction and three isolated compounds (phellopterin, oxypeucedanin and poncirin) showed significant anti-adipogenic activity as observed by reduced lipid deposition in differentiated 3T3-L1 cells. Further, oxypeucedanin downregulated the key adipogenic markers, such as peroxisome proliferator-activated receptors proteins γ (PPAR-γ), sterol response element binding proteins-1 (SREBP-1), CCAAT/enhancer binding proteins-α (C/EBP-α), adipocyte-specific lipid binding proteins (FABP-4), adipocyte fatty acid binding proteins (aP2), lipoprotein lipase (LPL) and leptin. Conclusion: This study indicated that the ethanol extract, hexane fraction and ethyl acetate fraction of P. trifoliata fruits possess strong anti-adipogenic activity, containing the active compounds such as phellopterin, oxypeucedanin and poncirin. Further research is recommended to explore their efficacy and safety in animal and clinical models.     

Carbon nanotube synthesis in supercritical toluene

Multiwall carbon nanotubes (MWNTs) were synthesized in supercritical toluene at 600 degrees C and approximately 12.4 MPa using ferrocene, Fe, or FePt nanocrystals as growth catalysts. Toluene serves as both the carbon source for nanotube formation and the solvent. In contrast to vapor-phase synthetic routes, the supercritical solvent provides high precursor concentration and a homogeneous reaction environment with dispersed growth catalyst particles. Both carbon filaments and MWNTs are produced by this approach, and a growth mechanism is proposed to explain the factors that determine the nanotube versus filament morphology. The plasmon energies of the pi and pi + sigma valence electrons were measured using electron energy-loss spectroscopy (EELS) of individual carbon fibers and MWNTs as a characterization tool to complement the imaging data obtained from electron microscopy.     

Temperature dependence of the lowest frequency <Emphasis Type="BoldItalic">E</Emphasis><Subscript><Emphasis Type="Bold">g</Emphasis></Subscript> Raman mode in laser-synthesized anatase TiO<Subscript>2</Subscript> nanopowder

Nanosized titanium dioxide (TiO₂) powder was prepared by a laser-induced pyrolysis. Specific surface area of the as-grown powder measured by BET method was 109 m²/g. The grain size (14.5 nm) estimated from these data coincides well with the crystallite size (12.3 nm) determined by XRD measurements. The average grain size (∼35 nm) obtained from the subsequent SEM measurements refers to considerable agglomeration of nanoparticles. Raman spectroscopy has been used to investigate the structural properties of TiO₂ nanopowder and its anatase structure is confirmed. The blueshift and broadening of the lowest frequency E_g Raman mode at temperature range ∼25–550 K have been analyzed using a phonon-confinement model. Dominant influence of the strong anharmonic effect at higher temperatures was demonstrated. PACS 81.07.Wx; 78.30.-j; 63.22.+m     

Surface control of CdSe nanocrystals by UV-exposure in air and successive thermal treatment under ultra high vacuum

Colloidal CdSe nanocrystals were synthesized through a solution process. The CdSe nanocrystals coated on Si(1 0 0) wafers were UV-exposed in either an air or argon atmosphere to distinguish the effect of generated ozone from UV-radiation at 365 nm on the removal of surface capping pyridine molecules. The pyridine on the CdSe nanocrystal's surface could be effectively removed by the ozone generated during UV-exposure with an accompanying highly oxidized surface state of the CdSe nanocrystals. For the removal of surface oxides of CdSe nanocrystals, a successive thermal treatment under ultra high vacuum (UHV) was adopted. The optical energy bandgap measured by using UV-vis absorption spectroscopy showed a red shift with treatment with an increase of annealing temperature. The electronic energy structure of UHV-annealed CdSe nanocrystals film was analyzed in situ using X-ray absorption and photoelectron spectroscopy. A great resemblance was found between the values of the optical and electron energy bandgaps of effectively surface-treated CdSe nanocrystals film after UHV-annealing at 400 °C.     

4D-PTV Measurements of an impinged jet with a dynamic 3D-PTV

4D-PTV system was constructed. The measurement system consists of three high-speed high-definition cameras (1k × 1k, 2000 fps), Nd-Yag laser (2000 Hz) and a host computer. The GA-3D-PTV algorithm was used for completing the measurement system. The 4D-PTV is capable of probing the spatial distribution of velocity vectors of the flow field overcoming the temporal resolution of the characteristic turbulence length scales of the measured flow fields. A horizontal impinged jet flow (H/D = 7) was measured. The Reynolds number is about 33,000. Spatial temporal evolution of the jet flow was examined and physical properties such as spatial distributions of vorticity and turbulent kinetic energy were obtained with the constructed system.     

Properties and consolidation of nanocrystalline 3Cu–Al2O3 composite by rapid sintering

Nanopowders of Cu and Al₂O₃ were synthesized from 3CuO and 2Al powders by high-energy ball milling. Nanocrystalline Al₂O₃ reinforced composite was consolidated by pulsed-current activated sintering method within 2 min from mechanically synthesized powders of Al₂O₃ and Cu. The relative density of the composite was 96%. The average hardness and fracture toughness values obtained were 540 kg/mm² and 6.3 MPa m^1/2, respectively.