A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and MFVM with emphasis on the treatment of angular derivative term, which appears in curvilinear coordinates due to angular redistribution. After final discretization equation for MFVM is introduced by using the step scheme and directional weights, the present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium. All of the results presented here support its accuracy as well as moderate efficiency. Finally, the present approaches are applied to a truncated cone-shaped enclosure as a body-fitted geometry case.     

基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

图像的自动采集分析和实现

文章针对焊件检测过程中需大量采集和分析实时图像的要求 ,利用小波分析的特点 ,相关跟踪识别视频图像运动状态 ,实现自动采集、分析处理和储存一并完成 ,解决了视频图像连续捕获不能得到高像质的问题。     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

钐(Ⅱ)类卡宾CH_3SmCH_2X(X=Cl、Br和Ⅰ)促进乙烯环丙烷化反应途径的理论研究(英文)

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理。对三种不同的钐的SS试剂CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)分别和CH_2CH_2反应的各反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证。结果表明：CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)与CH_2CH_2环丙烷化反应按亚甲基转移通道(通道A)和卡宾金属化通道(通道B)都可以进行,与锂类卡宾的反应机理相同,只是按亚甲基转移通道(通道A)进行反应较容易一些,而且此反应在较低的温度下就可以发生。     

Simultaneous determination of trace cadmium and mercury in Chinese herbal medicine by non-dispersive atomic fluorescence spectrometry using intermittent flow vapor generator.

A method was proposed for the simultaneous determination of trace cadmium and mercury by vapor generation non-dispersive atomic fluorescence spectrometry using an intermittent flow system. The effects of the parameters on the performance were studied systematically. The parameters such as acid concentration of the reaction medium, flow rate of the carrier gas and shield gas, the observation height and the atomizer temperature, etc. which affected the sensitivity, were optimized. Ascorbic acid, cobalt ion and thiourea were used as enhancement reagents or masking agents to enhance the generation efficiency of the volatile species of Cd and Hg. The mechanisms of their effects on vapor generation were investigated. In the presence of thiourea and ascorbic acid, the influences of some coexisting elements on the determination of cadmium and mercury were investigated. The detection limits (3sigma) were 0.010 microg l(-1) for Cd and 0.019 microg l(-1) for Hg, respectively. The relative standard deviations for Cd and Hg at 1.00 microg l(-1) were 2.6% and 0.97% (n = 11), respectively. The proposed method has been satisfactorily applied to the determination of trace cadmium and mercury in Chinese herbal medicine.     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。