Crystal structure and electrical properties study of 4-aminopyridinium chloridobismuthate (III) (C5N2H7)4.HBi2Cl11

The crystal structure of (C₅N₂H₇)₄.HBi₂Cl₁₁ has been determined at room temperature by single crystal X-ray diffraction. The compound crystallizes in the triclinic system with Pī space group. The crystal structure consists of two asymmetric inequivalent molecules of 4-aminopyridinium and anionic HBi₂Cl₁₁ chains. The HBi₂Cl₁₁ anionic chains stacked along the a-axis are formed with Bi₂Cl₁₁ dimers connected to each other via hydrogen atoms. The crystal packing is stabilized with N–H...Cl hydrogen bonds connecting aminopyridinium units to the HBi₂Cl₁₁ anionic chains. The title compound exhibits an order–disorder phase transition at 338 K. The AC electrical conductivity properties of (C₅N₂H₇)₄.HBi₂Cl₁₁ compound have been investigated by means of impedance spectroscopy measurements over wide ranges of frequencies and temperatures, 200 Hz to 5 MHz and 303 to 418 K, respectively. Detailed analysis of the impedance spectrum suggests that the electrical properties of the material are strongly temperature dependent. The frequency-dependent conductivity data were fitted in the Jonscher's law: $ \sigma \left( \omega \right) = \sigma (0) + A{\omega^n} $ . The nature of variation of DC conductivity suggests Arrhenius type of electrical conductivity.     

Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.     

A one step synthesis of thiadiazolo[2,3-b]quinazoline derivatives

Diazotized anthranilic acid and its methyl ester react with substituted phenacyl thiocyanates 3 to give in both cases the corresponding thiadiazolo[2,3-b]quinazolines 7a-e . A mechanism is proposed and it is substantiated by alternate synthesis of 7a from the hydrazidoyl chlorides 9a,b and potassium thiocyanate.     

A new bacterial biosensor for trichloroethylene detection based on a three-dimensional carbon nanotubes bioarchitecture

Trichloroethylene (TCE), a suspected human carcinogen, is one of the most common volatile groundwater contaminants. Many different methodologies have already been developed for the determination of TCE and its degradation products in water, but most of them are costly, time-consuming and require well-trained operators. In this work, a fast, sensitive and miniaturised whole cell conductometric biosensor was developed for the determination of trichloroethylene. The biosensor assembly was prepared by immobilising Pseudomonas putida F1 bacteria (PpF1) at the surface of gold interdigitated microelectrodes through a three-dimensional alkanethiol self-assembly monolayer/carbon nanotube architecture functionalised with Pseudomonas antibodies. The biosensor response was linear from 0.07 to 100 μM of TCE (9–13,100 μg L⁻¹). No significant loss of the enzymatic activity was observed after 5 weeks of storage at 4 °C in the M457 pH 7 defined medium (two or three measurements per week). Ninety-two per cent of the initial signal still remained after 7 weeks. The biosensor response to TCE was not significantly affected by cis-1,2-dichloroethylene and vinyl chloride and, in a limited way, by phenol. Toluene was the major interference found. The bacterial biosensor was successfully applied to the determination of TCE in spiked groundwater samples and in six water samples collected in an urban industrial site contaminated with TCE. Gas chromatography–mass spectrometric analysis of these samples confirmed the biosensor measurements.     

Adsorption of CO<Subscript>2</Subscript>-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO<Subscript>2</Subscript> separation

Adsorption of CO₂, N₂, CH₄ and H₂ on triamine-grafted pore-expanded MCM-41 mesoporous silica (TRI-PE-MCM-41) was investigated at room temperature in a wide range of pressure (up to 25 bar) using gravimetric measurements. The material was found to exhibit high affinity toward CO₂ in comparison to the other species over the whole range of pressure. Column-breakthrough dynamic measurements of CO₂-containing mixtures showed very high selectivity toward CO₂ over N₂, CH₄ and H₂ at CO₂ concentrations within the range of 5 to 50%. These conditions are suitable for effective removal of CO₂ at room temperature from syngas, flue gas and biogas using temperature swing (TS) or temperature-pressure swing (TPS) regeneration mode. Moreover, TRI-PE-MCM-41 was found to be highly stable over hundreds of adsorption-desorption cycles using TPS as regeneration mode.     

Effect of sulphate groups on catalytic properties of chromium supported by zirconia in the <Emphasis Type="Italic">n</Emphasis>-hexane aromatization

Catalysts based on chromium supported by sulphated and unsulphated zirconia have been synthesised, in one step, by sol–gel method and dried in hypercritical solvent conditions. Comparative study of their catalytic properties shows that dispersed Cr³⁺ seems to be the active species in the n-hexane aromatisation reaction. However, the acidity generated by sulphate groups acts as coke eliminator of the layers deposed on the surface mainly when catalyst is calcined at high temperature.     

Insecticidal effect of <Emphasis Type="Italic">Mentha pulegium</Emphasis> L. and <Emphasis Type="Italic">Mentha suaveolens</Emphasis> Ehrh. hydrosols against a pest of citrus, <Emphasis Type="Italic">Toxoptera aurantii</Emphasis> (Aphididae)

Essential oils proved their efficiency as natural insecticides to fight many pests of stored products and crops whereas the hydrosols have not been evaluated yet. The objective of this work is to assess the insecticidal effect of hydrosols extracted from Mentha suaveolens Ehrh. and Mentha pulegium L. toward an insect pest of citrus, Toxoptera aurantii (Homoptera, Aphididae). The extraction of hydrosols was carried out by hydro-distillation using Clevenger apparatus and then the chemical composition was identified by gas chromatography coupled with mass spectrometry. The chemical composition of two hydrosols revealed the abundance of hydrophilic and oxygenated compounds as piperitenone oxide and carvacrol. Different concentrations of each hydrosol were separately diluted in distilled water and applied topically to aphids. The results of this investigation have shown a high insecticidal effect, and the M. suaveolens hydrosol is more effective against citrus pests than that of M. pulegium L. Consequently, these natural compounds can be used in the management of aphids on citrus.