Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Lyophilised Platelet-Rich Fibrin: Physical and Biological Characterisation

Background: Platelet-rich fibrin (PRF) has gained popularity in craniofacial surgery, as it provides an excellent reservoir of autologous growth factors (GFs) that are essential for bone regeneration. However, the low elastic modulus, short-term clinical application, poor storage potential and limitations in emergency therapy use restrict its more widespread clinical application. This study fabricates lyophilised PRF (Ly-PRF), evaluates its physical and biological properties, and explores its application for craniofacial tissue engineering purposes. Material and methods: A lyophilisation method was applied, and the outcome was evaluated and compared with traditionally prepared PRF. We investigated how lyophilisation affected PRF’s physical characteristics and biological properties by determining: (1) the physical and morphological architecture of Ly-PRF using SEM, and (2) the kinetic release of PDGF-AB using ELISA. Results: Ly-PRF exhibited a dense and homogeneous interconnected 3D fibrin network. Moreover, clusters of morphologically consistent cells of platelets and leukocytes were apparent within Ly-PRF, along with evidence of PDGF-AB release in accordance with previously reports. Conclusions: The protocol established in this study for Ly-PRF preparation demonstrated versatility, and provides a biomaterial with growth factor release for potential use as a craniofacial bioscaffold.     

An efficient sampling method for stochastic inverse problems

A general framework is developed to treat inverse problems with parameters that are random fields. It involves a sampling method that exploits the sensitivity derivatives of the control variable with respect to the random parameters. As the sensitivity derivatives are computed only at the mean values of the relevant parameters, the related extra cost of the present method is a fraction of the total cost of the Monte Carlo method. The effectiveness of the method is demonstrated on an example problem governed by the Burgers equation with random viscosity. It is specifically shown that this method is two orders of magnitude more efficient compared to the conventional Monte Carlo method. In other words, for a given number of samples, the present method yields two orders of magnitude higher accuracy than its conventional counterpart.     

Nonlinear Strong Shock Interactions: A Shock-Fitted Approach

This paper addresses nonlinear effects which result from the interaction of shock waves with vortices. A series of experiments are carried out, which involve the interaction of a strong shock wave with a single plane vorticity wave and a randomly distributed wave system. These experiments are first conducted in the linear regime to obtain a mutual verification of theory and computation. They are subsequently extended into the nonlinear regime. A systematic study of the interaction of a plane shock wave and a single vortex is then conducted. Specifically, we investigate the conditions under which nonlinear effects become important, both as a function of shock Mach number, M ₁, and incident vortex strength (characterized by its circulation Γ). The shock Mach number is varied from 2 to 8, while the circulation of the vortex is varied from infinitesimally small values (linear theory) to unity. Budgets of vorticity, dilatation, and pressure are obtained. They indicate that nonlinear effects become more significant as both the shock Mach number and the circulation increase. For Mach numbers equal to 5 and above, the dilatation in the vortex core grows quadratically with circulation. An acoustic wave propagates radially outward from the vortex center. As circulation increases, its upstream-facing front steepens at low Mach numbers, and its downstream-facing front steepens at high Mach numbers. A high Mach number asymptotic expansion of the Rankine--Hugoniot conditions reveals that nonlinear effects dominate both the shock motion and the downstream flow for ΓM ₁ > 1. Received 28 June 1997 and accepted 25 November 1997     

Optimally growing boundary layer disturbances in a convergent nozzle preceded by a circular pipe

We report the findings from a theoretical analysis of optimally growing disturbances in an initially turbulent boundary layer. The motivation behind this study originates from the desire to generate organized structures in an initially turbulent boundary layer via excitation by disturbances that are tailored to be preferentially amplified. Such optimally growing disturbances are of interest for implementation in an active flow control strategy that is investigated for effective jet noise control. Details of the optimal perturbation theory implemented in this study are discussed. The relevant stability equations are derived using both the standard decomposition and the triple decomposition. The chosen test case geometry contains a convergent nozzle, which generates a Mach 0.9 round jet, preceded by a circular pipe. Optimally growing disturbances are introduced at various stations within the circular pipe section to facilitate disturbance energy amplification upstream of the favorable pressure gradient zone within the convergent nozzle, which has a stabilizing effect on disturbance growth. Effects of temporal frequency, disturbance input and output plane locations as well as separation distance between output and input planes are investigated. The results indicate that optimally growing disturbances appear in the form of longitudinal counter-rotating vortex pairs, whose size can be on the order of several times the input plane mean boundary layer thickness. The azimuthal wavenumber, which represents the number of counter-rotating vortex pairs, is found to generally decrease with increasing separation distance. Compared to the standard decomposition, the triple decomposition analysis generally predicts relatively lower azimuthal wavenumbers and significantly reduced energy amplification ratios for the optimal disturbances.     

The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Direct simulation of compressible turbulence in a shear flow

The purpose of this study is to investigate compressibility effects on the turbulence in homogeneous shear flow. We find that the growth of the turbulent kinetic energy decreases with increasing Mach number—a phenomenon which is similar to the reduction of turbulent velocity intensities observed in experiments on supersonic free shear layers. An examination of the turbulent energy budget shows that both the compressible dissipation and the pressure-dilatation contribute to the decrease in the growth of kinetic energy. The pressure-dilatation is predominantly negative in homogeneous shear flow, in contrast to its predominantly positive behavior in isotropic turbulence. The different signs of the pressure-dilatation are explained by theoretical consideration of the equations for the pressure variance and density variance. We previously obtained the following results for isotropic turbulence: first, the normalized compressible dissipation is of O(M _t ² ), and, second, there is approximate equipartition between the kinetic and potential energies associated with the fluctuating compressible mode. Both these results have now been substantiated in the case of homogeneous shear. The dilatation field is significantly more skewed and intermittent than the vorticity field. Strong compressions seem to be more likely than strong expansions.Dedicated to Professor J.L. Lumley on the occasion of his 60th birthday.This research was supported by the National Aeronautics and Space Administration under NASA Contract No. NAS1-18605 while the authors were in residence at the Institute for Computer Applications in Science and Engineering (ICASE), NASA Langley Research Center, Hampton, VA 23665, U.S.A.     

A statistical learning strategy for closed-loop control of fluid flows

This work discusses a closed-loop control strategy for complex systems utilizing scarce and streaming data. A discrete embedding space is first built using hash functions applied to the sensor measurements from which a Markov process model is derived, approximating the complex system’s dynamics. A control strategy is then learned using reinforcement learning once rewards relevant with respect to the control objective are identified. This method is designed for experimental configurations, requiring no computations nor prior knowledge of the system, and enjoys intrinsic robustness. It is illustrated on two systems: the control of the transitions of a Lorenz’63 dynamical system, and the control of the drag of a cylinder flow. The method is shown to perform well.