Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Application of a new standardization method in activation analysis with registration of soft gamma radiation

An application of a new standardization method for rapid activation mass analysis with registration of the strongly absorbed low-energy gamma radiation is described. This method makes it possible to avoid the use of the time-consuming and laborious method of Internal Standard.     

Dinitration studies of 2,4,5-tribromo-3,6-dimethylphenol: the formation of an acyloin rearrangement product

Dinitration of 2,4,5-tribromo-3,6-dimethylphenol(1) gives either the tribromodinitro-compound(2) or its acyloin rearrangement product(3), depending on the reaction conditions: X-ray crystal structure analyses are reported for compounds (2) and (3).     

Improperly efficient solutions in a class of vector optimization problems

Journal of Global Optimization - Improperly efficient solutions in the sense of Geoffrion in linear fractional vector optimization problems with unbounded constraint sets are studied systematically...     

SHORT-TERM ADAPTATION OF HIGHER PLANTS TO CHANGING LIGHT INTENSITIES AND EVIDENCE FOR THE INVOLVEMENT OF PHOSPHORYLATION OF THE LIGHT HARVESTING CHLOROPHYLL alb PROTEIN COMPLEX OF PHOTOSYSTEM II

Abstract The short-term adaptation of intact leaves to an increase in light intensity was studied by an analysis of chlorophyll fluorescence and oxygen evolution monitored by photoacoustics. An increase in light intensity led to an oxygen “gush”. This “gush” was followed by a large (up to 120%) biphasic increase in the yield of oxygen evolution characterized by a fast phase (T = 0.5–2 min) and a slow phase (T = 4–20 min). The fast phase of the increase in oxygen yield was coupled to a decrease of fluorescence, whereas the slow phase was accompanied by a parallel fluorescence increase. A comparison of fluorescence parameters with oxygen yield indicates that the slow phase of the increase in oxygen yield was coupled to an increase in the antenna size of photosystem II. The slow phase was not inhibited by the uncoupler Nigericin but it was absent in chlorophyll-b-less barley mutants dencient in the light harvesting chlorophyll a/b protein complex of photosystem II (LHC II). These experiments indicate that changes in the LHC II mediated energy distribution, which occur in the time-range of several minutes, are involved in the adaptation to changing light intensities. Moreover, electrophoretic analysis of ³²P orthophosphate labeled leaf discs adapted to low and high light intensities suggests that the slow phase of the increase in oxygen evolution involves dephosphorylation of the 25 kDa polypeptide of LHC II, by a small extent of 12%. The trigger for the slow phase of the increase in oxygen yield does not involve the oxidation of the plastoquinone pool. It was found that in response to the increased light intensity, the plastoquinone pool became more reduced as judged by model calculations. Experiments with the uncoupler Nigericin suggest that the control of the slow phase of adaptation to increased light intensity was also not exerted by the pH gradient across the thylakoid membrane. The similarities between the adaptation to increased light intensity and the state II to state I transition suggest that both adaptation phenomena involve LHC II dephosphorylation possibly triggered by the cytochrome b₆/f complex.     

A study of the gold/aqueous electrolyte interphase by modulated reflection spectroscopy

The admittance and differential reflectivity of an electrode of polycrystalline gold in contact with aqueous 0.02 M NaF, KClO₄, 0.01 M Na₂SO₄ and KCl have been measured in the range of potential where the electrode is ideally polarized (?0.7 V to 0.8 V NHE). In NaF and KClO₄ evidence was obtained for the compression of the adsorbed layer of water. The increase of the number of water molecules, with respect to the number in the least original state (at?4μC cm^?2), is 3% at +8 μC cm^?2 and at?17 μC cm^?2. At the potential of zero charge the water dipoles are oriented preferentially with the oxygen towards the metal. In KCl the optical measurements confirm the existence of two types of Au?Cl^? interaction and the covalent character of the bond at the most positive charges.     

Zur Synthese wasserfreier Ammonium-Seltenerdhalogenide

Preparation of Ammonium Rare Earth Halides totally free of Water Ammonium rare earth halides totally free of traces of water were prepared in an one step synthesis from metal, ammonium halide, and halogen in a two step temperature regime.     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.