［NaXY」_2W_nMo_（6－n）O_（19）的~1HNMR和IR研究

本文对二种具有新奇结构的［ＮａＸＹ］２ＷｎＭｏ６－ｎＯ１９（Ⅰ．Ｘ＝ＤＢ１８Ｃ６，Ｙ＝ＣＨ３ＯＨ，ｎ＝４；Ⅱ．Ｘ＝ＤＢ２４Ｃ８，ｎ＝１）冠醚钼钨杂多酸超分子配合物进行了核磁共振和红外光谱测定，判定了谱图的归属并考察了结构与谱学参数之间的关系。     

Functional graphene-gold nano-composite fabricated electrochemical biosensor for direct and rapid detection of bisphenol A

In this research, the graphene with excellent dispersity is prepared successfully by introducing gold nanoparticle to separate the individual sheets. Various techniques are adopted to characterize the prepared graphene and graphene-gold nanoparticle composite materials. This fabricated new composite material is used as the support material to construct a novel tyrosinase based biosensor for detection of bisphenol A (BPA). The electrochemical performances of the proposed new enzyme biosensor were investigated by differential pulse voltammetry (DPV) method. The proposed biosensor exhibited excellent performance for BPA determination with a wide linear range (2.5 × 10⁻³–3.0 μM), a highly reproducible response (RSD of 2.7%), low interferences and long-term stability. And more importantly, the calculated detection limit of the proposed biosensor was as low as 1 nM. Compared with other detection methods, this graphene-gold nanoparticle composite based tyrosinase biosensor is proved to be a promising and reliable tool for rapid detection of BPA for on-site analysis of emergency BPA related pollution affairs.     

Oriented ZnO nanoflakes on nickel-titanium alloy fibers for solid-phase microextraction of polychlorinated biphenyls and polycyclic aromatic hydrocarbons

ZnO nanoflakes (ZnONFs) were electrochemically grown on a nickel-titanium alloy (NiTi) wire for use in solid-phase microextraction. Prior to the growth of ZnONFs, the NiTi wire was hydrothermally treated for in-situ growth of TiO₂/NiO nanoflakes as a seeding base. The applied potential was used to control the dimensions of vertically oriented hexagonal ZnONFs. After annealing at 600 °C, the resulting fiber display fairly selective affinity for polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons. The fibers were applied to the preconcentration of PCBs which then were quantified by HPLC with UV detection. Compared to commercial polydimethylsiloxane coatings, the new coating displays high extraction capability, rapid extraction kinetics and superior cycling stability. This is assumed to be due to its high surface-to-volume ratio, double-sided open access structure, and enhanced structural stability. The assay excels by (a) a wide analytical range (0.10 to 200 μg L^?1 of PCBs), (b) low limits of detection (20–17 ng L^?1), and (c) low standard deviations for the single fiber repeatability (<9.8%) and for the fiber-to-fiber reproducibility (<7.5%). Satisfactory accuracy and precision were achieved when PCBs were determined by this method in spiked rain water, river water and wastewater samples.

Open image in new window

Graphical abstract ZnO nanoflakes were fabricated on a superelastic nickel-titanium alloy wire in desired orientation with enhanced extraction capability and good extraction selectivity. The fabricated fiber was suitable for the determination of PCBs in environmental water samples

     

Rapid in situ growth of oriented titanium‐nickel oxide composite nanotubes arrays coated on a nitinol wire as a solid‐phase microextraction fiber coupled to HPLC–UV

An oriented titanium‐nickel oxide composite nanotubes coating was in situ grown on a nitinol wire by direct electrochemical anodization in ethylene glycol with ammonium fluoride and water for the first time. The morphology and composition of the resulting coating showed that the anodized nitinol wire provided a titania‐rich coating. The titanium‐nickel oxide composite nanotubes coated fiber was used for solid‐phase microextraction of different aromatic compounds coupled to high‐performance liquid chromatography with UV detection. The titanium‐nickel oxide composite nanotubes coating exhibited high extraction capability, good selectivity, and rapid mass transfer for weakly polar UV filters. Thereafter the important parameters affecting extraction efficiency were investigated for solid‐phase microextraction of UV filters. Under the optimized conditions, the calibration curves were linear in the range of 0.1–300 μg/L for target UV filters with limits of detection of 0.019–0.082 μg/L. The intraday and interday precision of the proposed method with the single fiber were 5.3–7.2 and 5.9–7.9%, respectively, and the fiber‐to‐fiber reproducibility ranged from 6.3 to 8.9% for four fibers fabricated in different batches. Finally, its applicability was evaluated by the extraction and determination of target UV filters in environmental water samples.     

Novel molecularly imprinted stir bar sorptive extraction based on an 8-electrode array for preconcentration of trace exogenous estrogens in meat

A novel 8-electrode array as stir bar was designed for selective extraction of trace level exogenous estrogens from food samples, followed by liquid desorption and HPLC-photodiode array detection. The array consisted of 8 screen-printed electrodes and each electrode was modified with Fe₃O₄@meso-/macroporous TiO₂ microspheres and molecularly imprinted film (m-TiMIF). The fabrication of the imprinted film coating was very simple without organic solvents and chemical grafting. Both bisphenol A (BPA) and diethylstilbestrol (DES) were employed as templates in m-TiMIF fabrication in order to enrich both targets simultaneously. Interestingly, the imprinted stir bar array showed higher extraction capacity and selectivity for BPA and DES than the non-imprinted counterpart. Meanwhile, it exhibited fast adsorption and desorption kinetics due to increased mass transport in the ultra-thin film. Importantly, the m-TiMIF coating was robust enough for at least 20 uses without obvious alteration in extraction performance. The main parameters affecting the extraction efficiency, including stir speeding, sample pH, ionic strength, extraction time, desorption solvent and time, were optimized. Under optimal experimental conditions, the limits of detection (S/N = 3) of the developed method were 0.28 and 0.47 μg L⁻¹ for BPA and DES respectively, with enrichment factors of 32.6 and 52.8-fold. The linear ranges were 3.0–1500 μg L⁻¹ and 4.0–1500 μg L⁻¹ for BPA and DES, respectively. The m-TiMIF-coating conferred better recovery and selectivity, compared with the commercial stir bar coating. The new method was successfully applied to assess BPA and DES in pork and chicken samples with satisfactory recovery.     

两种钒配合物的合成、表征及与Ct-DNA作用研究

合成了两种钒-邻香草醛衍生物配合物[VO2(C10H11O3N)](HOCH2CH2NH3) (1)和VO(C8H8O3N)2 (2); 用FT-IR和X-ray单晶衍射对它们的晶体结构进行了表征; 用紫外吸收光谱法、荧光光谱法、循环伏安法、粘度法等分析了两种配合物与小牛胸腺DNA (Ct-DNA)的作用; 结果表明配合物1以非插入方式与Ct-DNA作用, 配合物2则以插入方式与Ct-DNA作用.     

Phospho sulfonic acid as an efficient and recyclable solid acid catalyst for the solvent-free preparation of acylals

Phospho sulfonic acid (PSA) acts as a highly effective and reusable catalyst for the chemo-selective protection of aldehydes with acetic anhydride under solvent-free conditions. The desirable features of this new catalytic methodology include its sustainability, effectiveness in the absence of solvent, a facile work-up procedure, and economic viability. PSA is fully characterized by Fourier transform infrared spectroscopy, wide-angle X-ray scattering analysis, and scanning electron microscopy with energy dispersive X-ray spectroscopy. The catalyst can be reused several times without significant loss of activity. In addition, no chromatographic separations are needed to obtain the desired products.     

染料分子SERS与FTIR－Raman的比较研究

本文研究了强荧光染料罗丹明Ｂ（ＲｈＢ）的表面增强拉曼（ＳＥＲＳ）和傅里叶变换红外拉曼（ＦＴＩＲ－Ｒａｍａｎ）光谱，比较了这两种技术在研究荧光物质拉曼效应方面各自的特点和优势，并对两种方法获得的振动模式的差异及ＲｈＢ在银表面的吸附方式进行了讨论。     

An aptamer-based colorimetric assay for chloramphenicol using a polymeric HRP-antibody conjugate for signal amplification

We describe an aptamer-based colorimetric assay for chloramphenicol (CAP) based on the ability of anti-single-stranded DNA antibody (anti-ssDNA Ab) to recognize ssDNA, and the catalytic ability of PowerVision (PV), which is a polymeric conjugate of horseradish peroxidase and antibody with a high enzyme-to-antibody ratio. The complementary DNA of the aptamer (cDNA) was immobilized on magnetic gold nanoparticles (Fe₃O₄@Au) and used as a capture probe (AuMNPs-cDNA). The ssDNA Ab and PV were conjugated to AuNPs to form signal tags that recognize ssDNA with anti-ssDNA Ab to form beads containing the amplified probe (AuMNPs-cDNA@anti-ssDNA Ab/PV-AuNPs). The PV on their surface catalyzes the oxidation of the substrate 3,3’,5,5’-tetramethylbenzidine to produce a color change which is quantified by absorptiometry at 652 nm. The assay has a linear calibration plot for CAP in the 0.01 to 100 ng mL⁻¹ range, with a detection limit as low as 3 pg mL⁻¹. The method was successfully employed to detect CAP in real samples. Results were consistent with data obtained using a conventional enzyme-linked immunosorbent assay.

PowerVision- labeled gold nanoparticles acting as signal tag catalyze the H₂O₂-mediated oxidation of TMB for color development, which can be observed by bare eyes and quantified by ultraviolet-visible spectroscopy.