赝能隙导致的YBa2(Cu1-xMx)3O7-δ(M=Co,Zn)薄膜的输运性质异常

报道了两类典型元素替代的超导Y123相体系-YBa2(Cu1-xCox)3O7-δ(x=0.01,0.02)和YBa2(Cu1-yZny)3O7-δ(y=0.005,0.010)薄膜的电阻率-温度特性(ρ(T))和Hall效应(RH (T)).研究表明,Co掺杂的Y123相体系十分类似于氧欠掺杂的情况,对Co掺杂的薄膜样品,由电阻率-温度特性定义的赝能隙打开的温度T*分别为193和225K.而Zn掺杂的样品没有观察到赝能隙打开对电阻率-温度特性的影响.由Hall效应的测量和Hall角(cotθH)定义了另一个特征温度T 0,介于Tc与T*之间,这一特征温度与核磁共振(NMR)给出的赝能隙打开温度相近,说明可能源于电子自旋自由度上的能隙打开.在室温到Tc范围内,电阻率-温度特性和Hall效应分别定义了两类不同的转变温度(T*和T 0),可能分别源于电子电荷和自旋通道上的赝能隙的打开,预示着电荷和自旋自由度分别进入某种基态.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

An approach to deciding the observational equivalence of Algol-like languages

We prove that the observational equivalence of third-order finitary (i.e. recursion-free) Idealized Algol (IA) is decidable using Game Semantics. By modelling the state explicitly in our games, we show that the denotation of a term M of this fragment of IA is a compactly innocent strategy-with-state, i.e. the strategy is generated by a finite view function f_M. Given any such f_M, we construct a real-time deterministic pushdown automaton (DPDA) that recognizes the complete plays of the knowing-strategy denotation of M. Since such plays characterize observational equivalence, and there is an algorithm for deciding whether any two DPDAs recognize the same language, we obtain a procedure for deciding the observational equivalence of third-order finitary IA. Restricted to second-order terms, the DPDA representation cuts down to a deterministic finite automaton; thus our approach gives a new proof of Ghica and McCusker’s regular-expression characterization for this fragment. Our algorithmic representation of program meanings, which is compositional, provides a foundation for model-checking a wide range of behavioural properties of IA and other cognate programming languages. Another result concerns second-order IA with full recursion: we show that observational equivalence for this fragment is undecidable.     

Time-resolved imaging of latent fingerprints with nanosecond resolution

Imaging of latent fingerprints using time-resolved (TR) method offers a broader platform to eliminate the unwanted background emission. In this paper, a novel TR imaging technique is demonstrated and implemented, which facilitates the detection of latent fingerprints with nanosecond resolution. Simulated experiments were carried out with two overlapping fingerprints treated with two fluorescent powders having different lifetimes in nanosecond range. The dependence of the fluorescence emission intensity in nanosecond resolution of TR imaging is also revealed.     

Novel aromatic polyamides bearing pendent diphenylamino or carbazolyl groups

Two new diamines, 2,4‐diaminotriphenylamine ( 3 ) and N‐(2,4‐diaminophenyl)carbazole ( 4 ), were synthesized via the cesium fluoride‐mediated aromatic substitution reactions of 1‐fluoro‐2,4‐dinitrobenzene with diphenylamine and carbazole, followed by palladium‐catalyzed hydrazine reduction. Amorphous and soluble aramids having pendent diphenylamino and carbazolyl groups were prepared by the phosphorylation polycondensation of aromatic dicarboxylic acids with diamines 3 and 4 , respectively. The aramids derived from diamine 3 had sufficiently high molecular weights to permit the casting of flexible and tough films. They exhibited excellent mechanical properties and moderately high softening temperatures in the 221–298 °C range. However, the reactions of diamine 4 with aromatic diacids gave relatively lower molecular weights products that could not afford flexible films. For a comparative purpose, the parent aramids derived from m‐phenylenediamine and aromatic diacids were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3302–3313, 2004     

Influence of preparation method on SrMoO4 impurity content and magnetotransport properties of double perovskite Sr2FeMoO6 polycrystals

The magnetic and electric properties of the Sr₂FeMoO₆ compound produced under different preparation conditions were studied. Depending on the preparation condition, a strong variation in the nonmagnetic SrMoO₄ impurity content was found, which in turn determined the metallic or semiconducting behavior of the resistivity of the Sr₂FeMoO₆ compound. There was also evidence that SrMoO₄ played a crucial role in modifying the low magnetic field intergrain tunneling magnetoresistance in Sr₂FeMoO₆. In addition, we have established a simple method to prepare the single phase Sr₂FeMoO₆ polycrystals.     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006