Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

Metamaterial absorber based on circular ring structure with and without copper lines

This paper presents the analysis of circular ring metamaterial absorber with the existing of copper lines. The structure is designed using lossy FR4 substrate with thin copper layers. The circular ring shape with copper lines is printed on the top surface of FR4 substrate, while at the bottom surface is printed with full copper ground plane. Parametric study is done to investigate the effect of copper lines on the resonance frequency. From the simulation, the circular ring metamaterial absorber with vertical copper lines can resonates at lower frequency, but this structure is polarized sensitive. This drawback can be improved by adding horizontal copper lines together with the vertical copper lines. The circular ring structure with vertical and horizontal copper lines is not only polarization insensitive, but it can works at wide operating angle of incident waves.     

Comparison between discrete dipole approximation and other modelling methods for the plasmonic response of gold nanospheres

We investigate the plasmonic response of gold nanospheres calculated using discrete dipole approximation validated against the results from other discretization methods, namely the finite-difference time-domain method and the finite-element methods. Comparisons are also made with calculations from analytical methods such as the Mie solution and the null-field method with discrete sources. We consider the nanoparticle interacting with the incident field both in free space and sitting on a planar substrate. In the latter case, discrete dipole approximation with surface interaction is used; this includes the interaction with the ‘image dipoles’ using Sommerfeld integration.     

Q‐symmetry and conditional Q‐symmetries for Drinfel'd–Sokolov–Wilson system

We study in this paper the Q‐symmetry and conditional Q‐symmetries of Drinfel'd–Sokolov–Wilson equations. The solutions which we obtain in this paper take the form of convergent power series with easily computable components. Copyright © 2014 John Wiley & Sons, Ltd.     

Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.     

X-ray CT in the detection of palm weevils

Early detection of the red palm weevils (RPW) is a major challenge in agriculture among all kinds of palm trees due to the nature of the insect and the difficulty to trace them through their life stages associated with the tree life. Many methods have been applied for the weevil detection such as X-ray diffraction techniques, fluoroscopy and ultrasound. On the other hand, the idea of tomography has been used for other purposes such as the determination of the age of the tree and for applied environmental studies. Such technology can also reveal the weevil in principle. In this study, we explore the use of X-ray CT for weevil detection with the Monte Carlo method. A model of the stem of a palm tree is developed for simulations. MCNPX is chosen to carry out the simulations for the radiography tally in the code. The tally records the 2D data of the X-ray beams irradiating the tree model. An iterative reconstruction method for cone beam CT is applied to obtain the 3D slices of the tree model. We are exploring the minimum number of projection angles and the detectability of the weevil. We shall also report the sensitivity of weevil detection using X-ray CT with a large set of simulations with different weevil sizes and tree diameters.     

Electronic structures and bonding of oxygen on plutonium layers

Oxygen adsorptions on -Pu (100) and (111) surfaces have been studied at both non-spin-polarized and spin-polarized levels using the generalized gradient approximation of density functional theory (GGA-DFT) with Perdew and Wang (PW) functionals. The center position of the (100) surface is found to be the most favorable site with chemisorption energies of 7.386 eV and 7.080 eV at the two levels of theory. The distances of the oxygen adatom from the Pu surface are found to be 0.92 Å and 1.02 Å, respectively. For the (111) surface non-spin-polarized calculations, the center position is also the preferred site with a chemisorption energy of 7.070 eV and the distance of the adatom being 1.31 Å, but for spin-polarized calculations the bridge and the center sites are found to be basically degenerate, the difference in chemisorption energies being only 0.021 eV. In general, due to the adsorption of oxygen, plutonium 5f orbitals are pushed further below the Fermi energy, compared to the bare plutonium layers. The work function, in general, increases due to oxygen adsorption on plutonium surfaces.Received: 20 July 2004, Published online: 9 September 2004PACS: 71.15.-m Methods of electronic structure calculations - 71.15.Mb Density functional theory, local density approximation, gradient and other corrections - 71.15.Nc Total energy and cohesive energy calculations 71.27. + a Strongly correlated electron systems; heavy fermions     

Simulating the introduction of a sapphire crystal into an epithermal neutron beamline

The epithermal beamline at the Portuguese Research Reactor is being optimized for Prompt Gamma Neutron Activation Analysis (PGNAA). One of the major changes is to thermalise the beam by the introduction of a sapphire crystal into the beamline. Placing the sapphire at the exit of the beamline would greatly reduce the alterations and work necessary to the port and make the crystal easily removable. However, the scattered neutrons from the sapphire would increase both the neutron-induced detector damage and the background radiation. MCNPX was used to simulate the crystal in the beam port and at the exit of the port.