Influence of biomass on hydrodynamics of an internal loop airlift reactor

The effect of the biomass presence on the overall circulation velocity, the linear velocities both in the riser and the downcomer and the overall gas hold-up was studied in a three-phase internal loop airlift reactor (ILALR). The measured data were compared with those obtained using a two-phase system (air—water). All experiments were carried out in a 40 dm³ ILALR at six different biomass concentrations (ranging from 0 g dm⁻³ to 7.5 g dm⁻³), at a temperature of 30°C, under atmospheric pressure. Air and water were used as the gas and liquid model media, respectively. Pellets of Aspergillus niger produced during the fermentation of glucose to gluconic acid in the ILALR were considered solid phase. In addition, liquid velocities were measured during the fermentation of glucose to gluconic acid using Aspergillus niger. All measurements were performed in a bubble circulation regime. At given experimental conditions the effect of the biomass on the circulation velocities in the ILALR was negligible. However, increasing of the biomass concentration led to lower values of the total gas hold-up. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Chiral induction in quinoline-derived oligoamide foldamers: assignment of helical handedness and role of steric effects

Chiral groups attached to the end of quinoline-derived oligoamide foldamers give rise to chiral helical induction in solution. Using various chiral groups, diastereomeric excesses ranging from 9% to 83% could be measured by NMR and circular dichroism. Despite these relatively weak values and the fact that diastereomeric helices coexist and interconvert in solution, the right-handed or left-handed helical sense favored by the terminal chiral group could be determined unambiguously using X-ray crystallography. Assignment of chiral induction was performed in an original way using the strong tendency of racemates to cocrystallize, and taking advantage of slow helix inversion rates, which allowed one to establish that the stereomers observed in the crystals do correspond to the major stereomers in solution. The sense of chiral helical induction was rationalized on the basis of sterics. Upon assigning an Rs or Ss chirality to the stereogenic center using a nomenclature where the four substituents are ranked according to decreasing sizes, it is observed that Rs chirality always favors left-handed helicity and Ss chirality favors right-handed helicity (P). X-ray structures shed some light on the role of sterics in the mechanism of chiral induction. The preferred conformation at the stereocenter is apparently one where the bulkiest group should preferentially point away from the helix, the second largest group should be aligned with the helix backbone, and the smallest should point to the helix.     

Aromatic foldamers as scaffolds for metal second coordination sphere design

As metalloproteins exemplify, the chemical and physical properties of metal centers depend not only on their first but also on their second coordination sphere. Installing arrays of functional groups around the first coordination sphere of synthetic metal complexes is thus highly desirable, but it remains a challenging objective. Here we introduce a novel approach to produce tailored second coordination spheres. We used bioinspired artificial architectures based on aromatic oligoamide foldamers to construct a rigid, modular and well-defined environment around a metal complex. Specifically, aza-aromatic monomers having a tethered [2Fe–2S] cluster have been synthesized and incorporated in conical helical foldamer sequences. Exploiting the modularity and predictability of aromatic oligoamide structures allowed for the straightforward design of a conical architecture able to sequester the metal complex in a confined environment. Even though no direct metal complex–foldamer interactions were purposely designed in this first generation model, crystallography, NMR and IR spectroscopy concurred to show that the aromatic oligoamide backbone alters the structure and fluxional processes of the metal cluster.

Wrapping a [2Fe–2S] metal complex in an aromatic foldamer helix is introduced as a new approach to tailor a second coordination sphere.     

Strained aromatic oligoamide macrocycles as new molecular clips

Can one join both ends of a helix? A helical aromatic oligoamide was macrocyclized into a saddle-shaped bifunctional clip molecule that self-assembles into discrete circular dodecamers in the solid state and shows great potential for binding aromatic acid guests in solution. The cyclization step requires that the helix is only partly denatured in the reaction medium.     

Oligo-Quinolylene–Vinylene Foldamers

Quinoline based aromatic amide foldamers are known to adopt stable folded conformations. We have developed a synthetic approach to produce similar oligomers where all amide bonds, or part of them, have been replaced by an isosteric vinylene group. The results of solution and solid state structural studies show that oligomers exclusively containing vinylene linkages are not well folded, and adopt predominantly flat conformations. In contrast, a vinylene segment flanked by helical oligoamides also folds in a helix, albeit with a slightly lower curvature. The presence of vinylene functions also result in an extension of π-conjugation across the oligomer that may change charge transport properties. Altogether, these results pave the way to foldamers in which both structural control and specific electronic properties may be engineered.     

Aromatic Foldamer Helices as α-Helix Extended Surface Mimetics

Helically folded aromatic oligoamide foldamers have a size and geometrical parameters very distinct from those of α-helices and are not obvious candidates for α-helix mimicry. Nevertheless, they offer multiple sites for attaching side chains. It was found that some arrays of side chains at the surface of an aromatic helix make it possible to mimic extended α-helical surfaces. Synthetic methods were developed to produce quinoline monomers suitably functionalized for solid phase synthesis. A dodecamer was prepared. Its crystal structure validated the initial design and showed helix bundling involving the α-helix-like interface. These results open up new uses of aromatic helices to recognize protein surfaces and to program helix bundling in water.     

Parallel Homochiral and Anti‐Parallel Heterochiral Hydrogen‐Bonding Interfaces in Multi‐Helical Abiotic Foldamers

A hydrogen‐bonding interface between helical aromatic oligoamide foldamers has been designed to promote the folding of a helix‐turn‐helix motif with a head‐to‐tail arrangement of two helices of opposite handedness. This design complements an earlier helix‐turn‐helix motif with a head‐to‐head arrangement of two helices of identical handedness interface. The two motifs were shown to have comparable stability and were combined in a unimolecular tetra‐helix fold constituting the largest abiotic tertiary structure to date.     

Hybridization of Long Pyridine‐Dicarboxamide Oligomers into Multi‐Turn Double Helices: Slow Strand Association and Dissociation,Solvent Dependence,and Solid State Structures

Oligoamides of 2,6‐diaminopyridine and 2,6‐pyridinedicarboxylic acid comprised of 5, 7, 9, 11, or 13 units and bearing 4‐isobutoxychains on all pyridine rings and tert‐butyl‐carbamate terminal groups have been synthesized stepwise, along with an 11 mer having benzyl‐carbamate terminal groups. The crystal structure of all five Boc‐terminated compounds has been obtained and shows a highly regular and conserved double helical hybridization motif of up to 3 complete turns for the 13 mer. Four pyridine units span one helical turn and define a helix pitch of ca 7 Å. Solution studies in CDCl₃ demonstrated that the Boc‐terminated oligomers strongly hybridize in this solvent, and that K_dim values increase with oligomer length. The K_dim values are 31000 and 7×10⁵ L mol^?1 for the 7 mer and the 9 mer, respectively, and are too high to be measured by NMR for the 11 mer and the 13 mer. Hybridization and dissociation kinetics at 2 mM proceed at decreasing rates upon increasing oligomer length. The rate was faster than minutes for the 7 mer, of the order of hours for the 9 mer, and days for the 11 mer and 13 mer. The same trend was observed in [D₅]pyridine but with considerably lower K_dim values and faster kinetics. The benzylcarbamate 11 mer was also found to hybridize into a double helix but with reduced K_dim values and faster kinetics compared to its Boc‐terminated analogue. Combined with previous studies, the results presented here frame a global understanding of the hybridization of these pyridinecarboxamide oligomers and provide useful guidelines for the design of other artificial double helices.