Spermine participates in oxidative damage of guanosine and 8-oxoguanosine leading to deoxyribosylurea formation

Oxidation of single- or double-stranded DNA containing a 7,8-dihydro-8-oxoguanosine lesion with the one-electron oxidant Na2IrCl6 in the presence of spermine led to formation of a covalent adduct that was analyzed by gel electrophoresis, HPLC, ESI-MS, and UV-vis. The adduct was labile to heat, exhibiting a t1/2 of 12 h at 37 degrees C, and the ultimate hydrolysis product was characterized as a deoxyribosylurea lesion. Data from model studies with 1,3-diaminopropane vs 1,4-diaminobutane are consistent with initial formation of a C5 spermine adduct from a dehydro-8-oxoguanosine intermediate, followed by rearrangement to a spiroaminal subject to slow hydrolysis at C4 of the purine. Spermine adducts could also be formed from oxidation of the analogous G-containing oligomer from reaction with singlet oxygen, albeit in lower yield. These results are surprising in light of the traditional view that spermine is radioprotective against DNA oxidation.     

Texture development in polyethylene. I. Uniaxial extension and uniaxial compression

Texture development of high-density polyethylene has been studied by x-ray diffraction at various strains for uniaxial extension, as achieved by uniaxial tension and extrusion, and for uniaxial compression. Pole distributions were measured for the (100), (200), (020), and (011) reflections. Textures were described by ideal single-crystal orientations with inverse pole figures. In uniaxial extension, samples were deformed up to true strains of 1.83 (reductions of up to 84%). After a strain of 0.55, the c axis oriented at 35° from the extension axis and with increasing strain approached the extension axis. This was attributed to initial (110) or (310) twinning in combination with (100) slip, followed subsequently by [001] slip. In compression, samples were deformed up to true strains of 1.83 (reductions up to 84%). The texture consisted of strong components of the compression axis near (100) and weaker components near (110). At higher strains the intensity of the near-(100) components decreased, whereas the near-(110) components became more intense. The near-(100) components are explained by slip on (100) planes. The growth of the near-(110) components at the expense of the near-(100) components can be explained by relaxation twinning of the near-(100) components.     

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

Effect of IR laser radiation on the structure and optical properties of PC-PBT/Pd polymer nanocomposite films

ABSTRACT

Bayfol (PC-PBT blend ?lm) is a class of polymeric solid-state nuclear track detector which has a lot of applications in several radiation detection ?elds. It is a bisphenol-A polycarbonate PC blended with polybutylene terephthalate PBT. Bayfol/Palladium (PC-PBT/Pd) nanocomposite films have been deposited using the molding technique. It is worth mentioning that this report is almost the first one dealing with the topic of the changes of physical properties of Bayfol/Pd nanocomposite due to laser exposure. Samples from PC-PBT/Pd (5?wt%) nanocomposite were exposed to IR-pulsed laser of 5-W power, capable of producing 2000 pulses per second with pulse duration of 200?ns at 904?nm. The laser fluences were in the range 2–25?J/cm². The resultant modi?cations in the exposed nanocomposite samples have been studied as a function of fluence using different characterization techniques such as X-ray diffraction (XRD), UV spectroscopy and color difference studies. The results indicate the proper dispersion of Pd nanoparticles in the PC-PBT matrix that causes a strong intermolecular interaction between Pd and PC-PBT, resulted in an increase in refractive index and the amorphous phase. Also, it is found that the laser exposure reduces the optical energy gap that could be attributed to the increase in structural disorder of the exposed PC-PBT/Pd nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the exposed samples and the non-exposed one, was increased with increasing the laser fluence, convoyed by a significant increase in the green and yellow color components.     

昆虫信息素研究III: 拟蚜虫警戒素的研究

合成了一系列碳数为十五和十四的倍半萜类蚜虫警戒素,并进行了生物活性测定,从中筛选有效化合物.     

Texture development in polyethylene II. Unidirectional rolling

The effect of degree of strain on texture development in high-density polyethylene has been studied by pole figure analysis for unidirectional rolling. The crystallite orientation distribution in rolling textures has been quantified with an efficient technique which fits three-parameter, two-dimensional Gaussian-type distributions to pole figure intensity data around ideal single crystal orientations. During flat rolling of polyethylene a texture consisting of a strong (100) [001] component and a weak (110) [001] component develops continuously from the lowest true strain of 0.24 (21% reduction) up to the highest true strain of 1.36 (74% reduction). The peak intensity of the Gaussian distributions of both (100) [001] and (110) [001] components increase continuously to the highest strain. The maximum angular breadth of both component distributions, which are roughly perpendicular to the strain direction, remains constant with increasing strain. The minimum angular breadth of both component distributions, which are roughly parallel to the strain direction, decreases continuously owing to gradual alignment of the covalently bonded chain backbone parallel to the strain direction. The development of the (100) [001] component is explained by slip on (100) planes while the weak (110) [001] component is explained by slip on (110) planes. Although the latter component was previously attributed to (110) or (310) relaxation twinning, this seems unlikely because of the lateral constraint during plane strain deformation conditions used in this study.     

羧甲基纤维素钠水凝胶的制备及其生物降解性研究

用羧甲基纤维素钠(CMC—Na)制得了含水量高达98％的水凝胶，考察了防腐剂、交联剂、无机态氮素、有机态氮素、碳水化合物的加入量以及环境中pH值等因素对生物降解性的影响。结果表明：制备条件不同，水凝胶的生物降解性不同；环境中一定量铵根离子的存在有利于水凝胶的生物降解；在pH=5．2的环境中纤维素酶活性最高，降解程度最大。     

The Anti-Inflammatory Effect of a γ-Lactone Isolated from Ostrich Oil of Struthio camelus (Ratite) and Its Formulated Nano-Emulsion in Formalin-Induced Paw Edema

The ostrich oil of Struthio camelus (Ratite) found uses in folk medicine as an anti-inflammatory in eczema and contact dermatitis. The anti-inflammatory effect of a γ-lactone (5-hexyl-3H-furan-2-one) isolated from ostrich oil and its formulated nano-emulsion in formalin-induced paw edema was investigated in this study. Ostrich oil was saponified using a standard procedure; the aqueous residue was fractionated, purified, and characterized as γ-lactone (5-hexyl-3H-furan-2-one) through the interpretation of IR, NMR, and MS analyses. The γ-lactone was formulated as nano-emulsion using methylcellulose (MC) for oral solubilized form. The γ-lactone methylcellulose nanoparticles (γ-lactone-MC-NPs) were characterized for their size, shape, and encapsulation efficiency with a uniform size of 300 nm and 59.9% drug content. The γ-lactone was applied topically, while the formulated nanoparticles (NPs) were administered orally to rats. A non-steroidal anti-inflammatory drug (diclofenac gel) was used as a reference drug for topical use and ibuprofen suspension for oral administration. Edema was measured using the plethysmograph method. Both γ-lactone and γ-lactone-MC-NPs showed reduction of formalin-induced paw edema in rats and proved to be better than the reference drugs; diclofenac gel and ibuprofen emulsion. Histological examination of the skin tissue revealed increased skin thickness with subepidermal edema and mixed inflammatory cellular infiltration, which were significantly reduced by the γ-lactone compared to the positive control (p-value = 0.00013). Diuretic and toxicity studies of oral γ-lactone-MC-NPs were performed. No diuretic activity was observed. However, lethargy, drowsiness, and refusal to feeding observed may limit its oral administration.