Preparation and characterization of PLGA particles for subcutaneous controlled drug release by membrane emulsification

Uniformly sized microparticles of poly(d,l-lactic-co-glycolic) (PLGA) acid, with controllable median diameters within the size range 40–140 μm, were successfully prepared by membrane emulsification of an oil phase injected into an aqueous phase, followed by solvent removal. Initially, simple particles were produced as an oil in water emulsion, where dichloromethane (DCM) and PLGA were the oil phase and water with stabiliser was the continuous phase. The oil was injected into the aqueous phase through an array type microporous membrane, which has very regular pores equally spaced apart, and two different pore sizes were used: 20 and 40 μm in diameter. Shear was provided at the membrane surface, causing the drops to detach, by a simple paddle stirrer rotating above the membrane. Further tests involved the production of a primary water in oil emulsion, using a mechanical homogeniser, which was then subsequently injected into a water phase through the microporous membrane to form a water in oil in water emulsion. These tests used a water-soluble model drug (blue dextran) and encapsulation efficiencies of up to 100% were obtained for concentrations of 15% PLGA dissolved in the DCM and injected through a 40 μm membrane.

Solidification of the PLGA particles was followed by removal of the DCM through the surrounding aqueous continuous phase. Different PLGA concentrations, particle size and osmotic pressures were considered in order to find their effect on encapsulation efficiency. Osmotic pressure was varied by changing the salt concentration in the external aqueous phase whilst maintaining a constant internal aqueous phase salt concentration. Osmotic pressure was found to be a significant factor on the resulting particle structure, for the tests conducted at lower PLGA concentrations (10% and 5% PLGA). The PLGA concentration and particle size distribution influence the time to complete the solidification stage and a slow solidification, formed by stirring gently overnight, provided the most monosized particles and highest encapsulation efficiency.     

RESTRICTED LIE ALGEBRAS WITH MAXIMAL 0-PIM

In this paper it is shown that the projective cover of the trivial irreducible module of a finite-dimensional solvable restricted Lie algebra is induced from the one dimensional trivial module of a maximal torus. As a consequence, the number of the isomorphism classes of irreducible modules with a fixed p-character for a finite-dimensional solvable restricted Lie algebra L is bounded above by p ^MT(L), where MT(L) denotes the maximal dimension of a torus in L. Finally, it is proved that in characteristic p > 3 the projective cover of the trivial irreducible L-module is induced from the one-dimensional trivial module of a torus of maximal dimension, only if L is solvable.     

Concentration of potassium cations in the permeate solution in the presence of N,N-dimethyl-N-2-propenyl-2-propen-1-aminium chloride homopolymer using dead-end nano-or ultrafiltration

The investigation is based on the nano-or ultrafiltration of inorganic salts in the presence of a polyelectrolyte in the feed solution. Cellulose acetate membranes are selected with a pore size of 10–20 nm. The membranes are imaged using atomic force microscope. The membrane is completely impermeable to the polyelectrolyte. Polyelectrolyte concentrations are taken in the range of 0.5–1 g/l to avoid a gel layer formation over the membrane. It is discovered that, at such low polyelectrolyte concentration, inorganic salt concentration in the permeate is higher than in the feed solution. This process therefore deviates from conventional membrane separation processes, where the permeate salt concentration is lower or equal to the salt concentration in the feed solution. It is shown that during the nano-or ultrafiltration of inorganic salts in the presence of polyelectrolyte, the ratio of salt concentration in the permeate to feed increases when the initial salt concentration in the feed solution is low. Concentration polarization has a negative impact on this concentrating effect. In the case of this investigation, KCl, KNO₃, K₂SO₄ are taken as inorganic salts, N,N-dimethyl-N-2-propenyl-2-propen-1-aminium chloride homopolymer is selected as a polyelectrolyte. The text was submitted by the authors in English.     

PLGA particle production for water-soluble drug encapsulation: Degradation and release behaviour

Particles for subcutaneous depot use encapsulating a model water-soluble drug have been produced from poly(lactic–glycolic acid) (PLGA) using a membrane emulsification—solvent evaporation technique. The release behaviour, mainly the change in size and inner morphology are reported. During release, the particles initially swelled in size, then reduced. A diffusion based model, taking in to account the change in particle size, is presented. Surface erosion is evident from the particle size and image evidence, and the diffusion model provides a fit to the data even during the surface erosion period, suggesting that the model drug diffuses before the particle degrades.     

Effect of aggregation on viscosity of colloidal suslension

This experimental study of viscosity of colloidal suspensions was performed using monodisperse polystyrene latex with particle diameter of 1.15 μm and a pH dependent negative zeta potential of up to 120 mV in aqueous solutions. The range of electrostatic repulsion between the particles was controlled by varying the concentration of potassium chloride. Suspensions under investigation were either in a stable, coagulated, or gelated, state depending on the salt concentration. Shear thinning behaviour was observed for all the samples studied. The dependence of viscosity on shear rate imposed was found to depend substantially on the salt concentration.     

Differential non-destructive image current detection in a fourier transform quadrupole ion trap

Dual-detector differential non-destructive Fourier transform detection in a quadrupole ion trap is shown to improve signal intensity and reduce noise compared with spectra recorded using a single detector. A larger area detector in each end-cap electrode is machined to fit its hyperbolic shape and so minimize field imperfections on the z-axis. Argon, acetophenone and bromobenzene spectra were recorded to allow a comparison between single- and dual-detector (differential) modes of detection and to demonstrate the improvement achieved with differential detection. Copyright 1999 John Wiley & Sons, Ltd.     

Temperature hysteretic effect and its influence on colossal magnetoresistance of La0.33Nd0.33Ca0.33MnO3

Electrical resistance (R) measurements of a bulk La_0.33Nd_0.33Ca_0.33MnO₃ perovskite in magnetic fields up to 40 kOe have revealed anomalous temperature hysteretic effects both in 0 Oe and 20 kOe magnetic fields. The sharp peak observed in the R vs. T plot indicates the occurrence of metal-to-insulator (M-I) transition at a temperature of T _MI=110 K and 140 K, for cooling and warming paths, respectively. An applied magnetic field of 20 kOe reduces the resistance and shifts T _MI to 160 K and 185 K for cooling and warming, respectively. We have observed a much higher resistance in the cooling path than in the warming path leading to the hysteretic resistance ratio (R _cool/R _warm) of 200 at 110 K and 1.8 at 160 K for 0 Oe and 20 kOe, respectively. Record values of colossal magnetoresistance (CMR) have been achieved. The CMR value reaches nearly 99% in the temperature ranges of 90 K to 140 K and 90 K to 170 K for 20 kOe and 40 kOe magnetic fields in the cooling mode, respectively. The observed unusual behavior is attributed to the co-existence of La-rich and Nd-rich domains assumed to be distributed randomly in the compound.