Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Ionic strength dependence of formation constants, protonation, and complexation of aspartic acid with dioxovanadium (V)

The stability constants of complexes of dioxovanadium (V) ion and L-asparrtic acid were determined potentiometrically at various ionic strengths of I = 0.1, 0.3, 0.5, and 0.7 mol. dm⁻³ at 25°C. A sodium chloride solution was used to maintain the ionic strength. The parameters based on these formation constants were calculated and the dependence of protonation and the stability constants on ionic strength are described by a Debye-Huckel type equation.     

Regioselective Reaction of N1-Benzyl-N2-(4-nitrophenyl)ethanediamide and Acetylenic Esters

The regioselective reaction of N¹-benzyl-N²-(4-nitrophenyl)ethanediamide with dialkyl acetylenedicarboxylates or alkyl propiolates in the presence of triphenylphosphine leads to dialkyl 4-benzylamino-1-(4-nitrophenyl)-5-oxo-2,5-dihydro-1H-pyrrole-2,3-dicarboxylates or alkyl 4-benzylamino-1-(4-nitrophenyl)-2-oxo-5-pyrrolidinecarboxylates in good yields.     

Certain density theorems applied to the embeddability of iteration semigroups

Aequationes mathematicae - Let A be an additive semigroup of real numbers the additive group generated by which is non-cyclic. Let $$I=(a,b)$$ be an open interval and $$\mathcal {A}=\left\{...     

Demulsification of Gas Oil/Water Emulsion via High-Intensity Ultrasonic Standing Wave

High-intensity ultrasonic standing wave field was established in a horizontal direction and its effect on “gas oil” in “water” emulsion separation rate was studied. Also, effects of four parameters on emulsion instability behavior were investigated: ultrasound irradiation time (5–30 min), emulsion position in ultrasound field (17–37 cm), ultrasound input intensity (20, 45, and 75%) and dispersed phase concentration (0.5, 2, and 10%). Emulsion light absorbance, droplet diameter and distribution were measured to analyze separation efficiency. The optimum states were 10% oil in water emulsion treated at 17 cm distance from ultrasound source under 30 minutes irradiation time and 20% sound intensity.     

Morphology and Size Distribution Characterization of Precipitated Asphaltene from Live Oil During Pressure Depletion

The size and morphology of asphaltene aggregates, precipitated from live oil by pressure depletion at the reservoir temperature was studied using scanning electron microscopy and atomic force microscopy. The experimental studies showed that the mean size of aggregates increased when pressure decreased. The results indicate that the morphology of aggregates was changed from amorphous spherical and elliptical shapes to irregular. A bimodal distribution function was able to describe the size distribution in pressure range of 500 to 3500 psi. At higher pressure, the unimodel was able to represent the size distribution. The results showed reduction in live oil stability and asphaltene aggregation with pressure drop.     

Heat stable and organosoluble benzoxazole or benzothiazole-containing poly(imide-ester)s and poly(etherimide-ester)s: synthesis and characterization

Two series of poly(imide-ester)s (PIEs) and poly(ether-imide-ester)s (PEIEs), having benzoxazole or benzothiazole pendent groups, were conveniently prepared by the diphenylchlorophosphate-activated direct polyesterification of two bis(imide-carboxylic acid)s (1), such as 2-[3,5-bis(N-trimellitimidoyl)phenyl]benzoxazole (1 _O ) and 2-[3,5-bis(Ntrimellitimidoyl) phenyl]benzothiazole (1 _S ) and two bis(imide-ether-carboxylic acid)s (2), such as 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzoxazole (2 _O ), and 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzothiazole (2 _S ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. The structures, solubilities and thermal properties of obtained polymers were investigated in detail. All of the resulting polymers were characterized by FTIR and ¹H-NMR spectroscopy and elemental analysis. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, tetrahydrofuran and m-cresol, as well as in polar organic solvents, such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide and dimethyl sulfoxide. The modified polymers were obtained in quantitative yields with inherent viscosities between 0.47 and 0.67 dl·g^?1. Experimental results indicated that all the polymers had glass transition temperature between 198 °C and 262 °C, the decomposition temperature at 10% weight loss between 398 °C and 531 °C under nitrogen.     

Synthesis of Highly Functionalized 1-Azadienes and Ketenimines

Summary. The 1:1 reactive intermediate generated by the addition of alkyl isocyanides to dialkyl acetylenedicarboxylates was trapped by fairly strong NH-acids such as carbazole, indole, or pyrrole to yield highly functionalized 1-azadienes and ketenimines.