Synthesis and characterization of molybdenum incorporated mesoporous aluminophosphate

A synthesis of molybdenum incorporated mesoporous aluminophosphate with long-chain n-alkylamine as template material had been prepared under non-aqueous condition. These materials were extensively characterized by using X-ray diffraction (XRD), nitrogen sorption isotherms, nuclear magnetic resonance of ²⁷Al and ³¹P (NMR), inductive coupled plasma (ICP), electron spin resonance (ESR), Fourier transform infrared (FTIR) and thermogravimetric-differential thermal analysis (TG-DTA). Morphology of the materials had been observed by using transmission electron microscope (TEM) that revealed the mesoporous materials possessed wormhole-like structures. Alkaline solvent extraction using n-butylamine/ethanol had been efficiently removed the n-alkylamine from the mesoporous samples which yielded BET surface areas around 550-730 m²/g. BJH analysis showed a narrow pore size distribution which increased with increasing of the carbon chain length of alkylamine (template). Valence state and coordination of the molybdenum in the obtained samples were investigated by using ESR and FTIR where it was found that Mo⁴⁺ and Mo⁶⁺ molybdenum species existed in the molybdenum incorporated mesoporous aluminophosphate in tetrahedral coordination.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Carbonyl allylations by 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide

2-Propenyl tin species, prepared from 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide in dichloromethane, causes nucleophilic addition to aldehydes to produce the corresponding homoallylic alcohols.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

Purification and characterization of gamma-enolase from various mammals.

The gamma subunit of enolase (gamma-enolase) was purified from the brain tissues of cow, dog, goat, pig, rabbit, and rat. The purification was achieved in only three steps: ammonium sulfate-precipitation, DE 53 cellulose ion-exchange chromatography, and polyacrylamide gel electrophoresis (PAGE) in a preparative mode. The purification procedure was comparatively more simple than previously reported methods, and the yield of gamma-enolase was sufficient for subsequent structural and immunological analyses. In all mammals, the purified gamma-enolase migrated in sodium dodecyl sulfate-PAGE (SDS-PAGE) with a molecular mass of 46 kilodaltons (kDa), and the immunological cross-reactivity between those gamma-enolases was very strong. The structural homology of these gamma-enolases was examined by peptide mapping using cyanogen bromide cleavage and subsequent two-dimensional electrophoresis. The resulting peptide patterns were highly similar and in cow, dog, and goat, the patterns were almost identical. These results indicate that structural homology, that is, the species non-specificity of gamma-enolase, appears to be very high.     

Expression of a restricted fragment of staphylococcal tetracycline resistance determinant as a fused product in Escherichia coli

Tetracycline resistance (TcR) plasmid pNS1, a deletion derivative constructed from staphylococcal plasmid pTP5, carries a tet determinant which specifies a TcR protein (TET) with a molecular weight of 50 kilodaltons (kDa). In order to express the pNS1-encoded TET as a fused product, a 0.8 kilobase pairs fragment containing 57.1% of tet determinant was inserted into a chloramphenicol resistance determinant. From the nucleotide sequence, it is deduced that the fusion protein (designated CAT'-TET') is a 53 kDa protein composed of 472 amino acids in which the 199 and 262 amino acids are derived from CAT and TET, respectively. Although the molecular weight of CAT'-TET' obtained from the result of sodium dodecyl sulfate polyacrylamide gel electrophoresis (42 kDa) was not in agreement with its predicted weight (53 kDa), the ratio of TET' segment to the fusion protein (22 kDa/42 kDa) corresponded almost exactly to that deduced from the nucleotide sequence (29 kDa/53 kDa). The expression of CAT'-TET' in Escherichia coli caused a rapid decrease in growth rate and in the number of viable cells. This result is thought to be due to the toxic effect of CAT'-TET' on the cell membrane.     

A novel solvent dipole-induced rotational isomerism of 1-hxdroxy-2-pyridone in the excited singlet state

The title compound shows dual fluorescence depending on polarity of the solvent used. The fluorescence in the nonpolar solvent, cyclohexane, has a maximuni at 370 nm, while the fluorescence in the polar solvent, methanol, has a maximum at 400nm. The short and long wavelength fluorescences were assigned to the syn and anti conformers, respectively. From these observations one is allowed to conclude that a novel solvent dipole-induced rotational isomerism takes place in the excited singlet state.     

Ni-catalyzed alkylative dimerization of vinyl grignard reagents using alkyl fluorides

Alkyl halides underwent unique cross-coupling reaction with vinylmagnesium chloride in the presence of Ni catalyst to give 2-alkyl-3-butenyl Grignard reagent (1) in high yields. This reaction proceeded efficiently at 25 degrees C in THF using primary and secondary alkyl fluorides. On the other hand, PhCH=CHMgBr gave double alkylative vinyl coupling product 4 in good yield as the sole coupling product. Alkyl fluorides react as the most suitable alkylating reagent in comparison to the corresponding chlorides, bromides, and iodides.