Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Novel bromotyrosine derivatives that inhibit growth of the fish pathogenic bacterium Aeromonas hydrophila, from a marine sponge Hexadella sp

Three new bromotyrosine derivatives, 11-N-methylmoloka'iamine (1), 11-N-cyano-11-N-methylmoloka'iamine (2), and kuchinoenamine (3), were isolated as antibacterial constituents from a marine sponge Hexadella sp. Their structures were elucidated on the basis of spectral and chemical methods. They exhibited moderate antibacterial activity against the fish pathogenic bacterium Aeromonas hydrophila.     

Thermoswitching property in TCNQ salts of ionenes containing poly(ethylene oxide) segments

Ionene polymers characterized by the alternating structure of ionene and crystalline poly(ethylene oxide) (PEO) segments were prepared as a function of PEO segment size. A microstructure of these ionenes and their 7,7,8,8-tetracyanoquinodimethane (TCNQ) salts were investigated with x-ray diffraction patterns, thermal scanning behavior, and polarizing micrographs. On the basis of this microstructure, the change in resistivity with temperature was studied. In Arrhenius' plots of the resistivity the simple salts in which the spherulites consisting of the PEO segments were observed showed a sharp decrease in resistivity with a rise in temperature [critical temperature resistor (CTR)] at about the melting point of the PEO segments, whereas the other simple salts in which the spherulites were not observed showed linear temperature dependence. The switching properties were confirmed similarly in repetitive heating/cooling cycles. This CTR characteristic was attributed to an increase in continuity in the conduction paths by melting spherulites. The apparent switching properties were not observed in the complex salts.     

Kinetic-catalytic determination of traces of iron by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

A new kinetic-catalytic method by the initial rate procedure for the determination of nanogram level of iron(III) is developed, which is based on its catalytic effect on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an indamine dye (λ_max=590 nm) in the presence of hydrogen peroxide. Iron(II) is also determined, being oxidized to iron(III) by hydrogen peroxide. Calibration graphs obtained by the initial rate method are linear in the range 1–1000 ng ml⁻¹ Fe and as low as 10⁻⁸ M Fe(II, III) can easily be determined. The relative standard deviations are 6.6, 2.5 and 1.5% for ten determinations of 1, 20 and 60 ng ml⁻¹ of Fe(III), respectively. The method is applicable to the determination of iron in natural waters without preconcentration and separation.     

Anode Magnetron Enhanced DC Glow Discharge Processes for Plasma Surface Cleaning and Polymerization

The objective of this study was to examine some fundamental factors involved in the design and construction of the anode magnetron dc glow discharge processes as well as its performance in plasma cleaning and polymerization. Those advantages of anode magnetron include the capability of the magnetron to operate at low pressure, as well as decreasing the thickness of cathode dark space, i.e., the negative glow which contains a higher concentration of ions and active species was more closely to the cathode surface, which makes the plasma surface cleaning and polymerization an effective and uniform processes. The deposition rate at a given discharge power is increased by the presence of anode magnetrons, and is also much higher relative to rf and af. The refractive index of dc plasma film at a given polymer thickness (such as TMS, 70 nm, RI: 2.4) is higher than rf, af, and cascade arc plasma (RI: 1.6–1.7).     

Studies on the Thioglycosides of N-Acetyl-Neuraminic Acid 8: Synthesis of S-(α-Sialyl)-(2→ 6)-β-Hexopyranosyl and -(2→ 6')-β-Lactosyl Ceramides Containing β-Thioglycosidically Linked Ceramide

ABSTRACT

Coupling of the sodium salt of S-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-galacto-2-nonulopyranosylonate)-(2→'6)-2,3,4-tri-O-acetyl-1,6-dithio-β-D-glucopyranose (5), -β-D-galactopyranose (8), or S-(methyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→'6)-O-(2,3,4-tri-O-acetyl-6-thio-β-D-galactopyranosyl)-(1→'4)-2,3,6-tri-O-acetyl-1-thio-β-D-glucopyranose (12), which were prepared from the corresponding 1-hydroxy compounds, 1, 2, and 9, via 1-chlorination, displacement with thioacetyl group, and S-deacetylation, with (2S,3R,4E)-2-azido-3-O-benzoyl-1-O-(p-toluenesulfonyl)-4-octadecene-1,3-diol (13), gave the corresponding β-thioglycosides 14, 18 and 22, respectively in good yields. The β-thioglycosides obtained were converted, via selective reduction of the azide group, condensation with octadecanoic acid, and removal of the protecting groups, into the title compounds.     

Preliminary communication:Novel method for uniform orientation of liquid crystal molecules by a polyimide surface exposed to a water flow

A novel technique for surface-induced orientation of liquid crystal (LC) molecules is proposed, using a polyimide surface exposed to a unidirectional water flow. The LC molecules director was unidirectionally oriented along the water flow direction on the polyimide surface. The orientational state of the LC director was strongly dependent upon whether the water flow exposure was carried out before or after thermal curing for imidization, and also upon the temperature of water flow.     

Temperature dependent light transmission-light scattering switching of (homeotropic liquid crystalline polymer network/liquid crystals/chiral dopant) composite film

A (photo-polymerizable liquid crystal (LC) monomer/LCs/chiral dopant/photoinitiator) mixture with a smectic A (SmA)-chiral nematic (N*) phase transition was sandwiched between two ITO glass substrates which were not subjected to any surface orientation treatment. When an electric field-induced homeotropically oriented SmA phase of the mixture was irradiated with UV light, an oriented liquid crystalline polymer (LCP) network was formed upon photo-polymerization of the LC monomer. Then, a (homeotropically oriented LCP network/LCs/chiral dopant) composite with a SmA-N* phase transition was prepared. A focal-conic texture appeared in the heat-induced N* phase of the composite upon heating from the transparent state of the homeotropically oriented SmA phase; the focal-conic texture exhibited strong light scattering. Upon cooling the composite to the SmA phase, this phase was again homeotropically oriented due to the strong intermolecular interaction between the LC molecules and the homeotropically oriented LCP network. Thus, the transparent state of the SmA phase and the light scattering state of the N* phase occurred reversibly upon cooling and heating, accompanied by the thermal SmA-N* phase transition.     

Impaired pulmonary blood flow distribution in congestive heart failure assessed using synchrotron radiation microangiography

Synchrotron radiation microangiography is a powerful tool for assessing adverse changes in pulmonary vessel density associated with primary pulmonary hypertension (PH). Congestive heart failure (CHF) leads to a `secondary' onset of PH, yet it is unknown whether secondary PH is also associated with reduced vessel density. This study utilized synchrotron radiation to assess both pulmonary vessel density and endothelial function in a Dahl rat model of CHF with secondary PH. High salt‐fed Dahl salt‐sensitive (Dahl‐S) and salt‐resistant (Dahl‐R) rats were anesthetized and microangiography was performed to assess the pulmonary vessel density and vascular responses to (i) sodium nitroprusside (5.0 µg kg^?1 min^?1), (ii) acetylcholine (3.0 µg kg^?1 min^?1) and (iii) ET‐1_A receptor blockade, BQ‐123 (1 mg kg^?1). Dahl‐S rats developed CHF and secondary PH as evident by endothelial dysfunction, impaired vasodilatory responses to acetylcholine, enhanced vasodilatory responses to BQ‐123 and extensive pulmonary vascular remodeling. Consequently, the pulmonary vessel density was adversely reduced. Interestingly, the etiology of secondary PH manifests with structural and functional changes that are comparable with that previously reported for primary PH. One important discrepancy, however, is that ET‐1 modulation of pulmonary vessels is most striking in vessels with a diameter range of 100–200 µm in secondary PH, in contrast to a range of 200–300 µm in primary PH. Such discrepancies should be considered in future studies investigating primary and secondary forms of PH.