Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

Light Diffraction of Aligned Polymer Fibers Periodically Dispersed by Phase Separation of Liquid Crystal and Polymer

We have confirmed light diffraction of aligned polymer fibers obtained by a phase separation of an anisotropic-phase solution of liquid crystal and polymer. He—Ne laser light passing through the polymer fibers was scattered in the axis vertical to the fibers, and had two peaks of light intensity symmetrical to the center of the transmitting laser spot. The two peaks were found to be caused by light diffraction due to the periodic polymer-fiber dispersion because the peaks corresponded to values calculated by intervals between the fibers. The periodical fiber networks are considered to be formed by anisotropic spinodal decomposition. This effect can be used to measure the dispersion order of the polymer fibers. © 2004 The Optical Society of Japan     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Base-free oxidative homocoupling of arylboronic esters

Base-free oxidative homocoupling reaction of arylboronic esters has been found to proceed using a catalytic amount of a palladium-1,3-bis(diphenylphosphino)propane (DPPP) complex under an oxygen atmosphere, affording a variety of biaryls in modest to excellent yields. Even arylboronic esters bearing a base-sensitive functional group are applicable to the reaction.     

A multi-mode-driven molecular shuttle: photochemically and thermally reactive azobenzene rotaxanes

The shuttling process of alpha-CyD in three rotaxanes (1-3) containing alpha-cyclodextrin (alpha-CyD) as a ring, azobenzene as a photoactive group, viologen as an energy barrier for slipping of the ring, and 2,4-dinitrobenzene as a stopper was investigated. The trans-cis photoisomerization of 1 by UV light irradiation occurred in both DMSO and water due to the movement of alpha-CyD toward the ethylene group, while the photoisomerization of 2 occurred in DMSO, but not in water. No photoisomerization was observed for 3 in both water and DMSO. The activation parameters of 1 and 1-ref in DMSO are subject to a compensation relation between deltaS(double dagger) and deltaH(double dagger); however, in water, the deltaS(double dagger) terms are not compensated by the deltaH(double dagger) terms. Alternating irradiation of the UV and visible lights resulted in a reversible change in the induced circular dichroism (ICD) bands of trans-1 and cis-1. In contrast, after the UV light irradiation, the ICD band of trans-2 decreased without the appearance of any bands of cis-2. The NMR spectra of 2 in DMSO showed coalescence of the split signals for the methylene and for the viologen protons due to the shuttling of alpha-CyD. Both the NOE differential spectra for cis-1 in water after UV light irradiation and 2 in DMSO after heating to 120 degrees C showed the negative NOE peaks assigned to interior protons of alpha-CyD, suggesting that alpha-CyD in cis-1 exists at the one ethylene moiety, and alpha-CyDs in cis-2 and 2 heated in DMSO exist at the propylene moieties.     

Vertebrate collagenase inhibitor. II. Tetrapeptidyl hydroxamic acids.

To develop a potent and specific collagenase inhibitor, a series of tetrapeptidyl hydroxamic acids were synthesized, based on the previous findings with tripeptidyl derivatives (Chem. Pharm. Bull., 38, 1007-1011, 1990). Among the series of tetrapeptidyl derivatives synthesized, R-Gly-Pro-Leu-Ala-NHOH and R-Gly-Pro-D-Leu-D-Ala-NHOH were found to be highly specific and potent inhibitors against vertebrate collagenase with an IC50 of 10(-6) M order, where R stands for Boc or acyl group. Analysis of their structure-activity relationships showed a characteristic feature of the substrate-binding site of collagenase as follows: 1) the S1 subsite forms a shallow hydrophobic pocket, although glycine residue corresponds to the subsite of the natural collagen substrate: 2) the S2 subsite constitutes a bulky pocket with less requirement for hydrophobicity: 3) the S3 subsite preferentially accommodates Pro residue: and 4) the accommodation of the P4-P1 subsites of peptidyl collagenase inhibitor to the S4-S1 subsites is required to form a tight binding of its hydroxamic acid moiety to the zinc ion at the catalytic site of the enzyme. The introduction of an enantiometric dipeptide unit, D-Leu-D-Ala, to the P2-P1 subsites demonstrated an increased binding capacity to the extended S4-S1 subsites of collagenase, thus providing proteinase-resistant inhibitor.     

Reaction of enaminones with carbon disulfide: Synthesis of heterocycles using enamino dithiocarboxylates

Reaction of various types of enaminones, which are prepared by the condensation of 1,3-dicarbonyl compounds with aromatic amines, with carbon disulfide in the presence of sodium hydroxide as the base in dimethyl sulfoxide to give the corresponding enamino dithiocarboxylates, 1,3-thiazines and trithiones. Enamino dithiocarboxylates are cyclized under refluxing in diphenyl ether to give the fused quinoline derivatives. The reaction of 6-arylamino-1,3-dimethyluracils with excess carbon disulfide in the presence of sodium hydroxide and subsequent methylation with dimethyl sulfate gave directly the corresponding 1,3-dimethyl-5-methylthiopyrimido[4,5-b]quinoline-2,4(1H,3H)-diones.     

Synthesis and antinociceptive activity of orally active opioid peptides: improvement of oral bioavailability by esterification

To improve the oral bioavailability of a dermorphin tetrapeptide analog, N(alpha)-1-iminoethyl-Tyr-D-MetO-Phe-MebetaAla-OH (III), which has a potent analgesic activity after oral administration, various derivatives were synthesized to increase lipophilicity by esterification of the C-terminal carboxyl group and/or acylation of the phenolic hydroxyl group on Tyr1. Antinociceptive activity was evaluated after subcutaneous or oral administration using the mouse tail pressure test. As a result, increased antinociceptive activity after oral administration as well as an improved ED50(p.o.)/ED50(s.c.) ratio, which is an indicator of oral bioavailability, were found for some compounds. With regard to the improvement of bioavailability, derivatives with acylation of the phenolic hydroxyl group on Tyr1 showed better results than derivatives with esterification of the C-terminal carboxyl group. In particular, an ED50(p.o.)/ED50(s.c.) ratio equivalent to that of morphine was found for an acetylated derivative, N(alpha)-1-iminoethyl-Tyr(COMe)-D-MetO-Phe-MebetaAla-OH (7a), as well as for a methoxycarbonylated derivative, N(alpha)-1-iminoethyl-Tyr(CO2Me)-D-MetO-Phe-MebetaAla-OH (7l).