Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Photoluminescence properties of trace amounts of Pr and Tb in yttria-stabilized zirconia

We have investigated the photoluminescence (PL) properties of trace amounts of Pr and Tb in single-crystal samples of yttria-stabilized zironia (YSZ), and found that Pr of the order of 10⁻⁶ mass% and Tb of the order of 10⁻⁵ mass% in YSZ can be detected by the PL spectroscopy. The PL spectra of the YSZ samples for the 280 nm excitation were comprised of several peaks and a broad emission. The peaks were attributed to transitions of Pr³⁺ and Tb³⁺ in the YSZ samples, whereas the broad emission seemed to be attributed to the yttria-associated oxygen vacancies. The peak intensities corresponded to the amounts of Pr and Tb in the YSZ samples, the amounts of which were analyzed by glow discharge mass spectrometry. In the PL excitation spectra, but not in the photoabsorption spectra, small peaks at 376 and 381 nm were observed, and were attributed to the transitions of Tb³⁺ in the YSZ samples. The results of the PL excitation spectra corresponding to the Pr³⁺ line emissions suggest that the charge transfer occurs between the YSZ and Pr ion in it. The trace amounts of these lanthanoids in YSZ would disturb the decay process of the photoinduced electrons to the yttria-associated oxygen vacancies.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.     

Two-mass models of the vocal cords for natural sounding voice synthesis

Three new two-mass models of the vocal cords are treated. First, the features, structure, and differential equations of motion are described for each of the new models and compared with those of previous models. Second, performances of the models are discussed in terms of glottal volume flow, glottal area, radiated sound pressure, trajectories of mass movement, running spectra of the output sound pressure, and perceptual naturalness of the output sound. Finally, the major effects of glottal source-vocal tract interaction including skewing, truncation, and superposition are investigated, using one of the simplest types of two-mass models and two types of load representing the vocal tract.     

Alternating copolymerization of carbon dioxide and epoxide by manganese porphyrin: The first example of polycarbonate synthesis from 1-atm carbon dioxide

The first successful example of the formation of polycarbonate from 1-atm carbon dioxide and epoxide was demonstrated by the alternating copolymerization of carbon dioxide and epoxide with manganese porphyrin as a catalyst. The copolymerization of carbon dioxide and cyclohexene oxide with (porphinato)manganese acetate proceeded under the 1-atm pressure of carbon dioxide to give a copolymer with an alternating sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3549–3555, 2003     

Characterization of U series nuclides in geological materials by selective leaching method

Geological and geochemical events were elucidated in by using U series nuclides in combination with chemical leaching technique. Two examples were examined: (1) in the apatite-bearing sediment column samples U(VI) is moving, while U(IV) in the samples is almost retained, and (2) the redistribution of U occurred along the column under the monsoon climate. On the other hand, U in the conglomerate sample is divided into 5 categories by the leaching technique, which are related with exchangeable, carbonate, iron oxide, organic/sulfide and silicate components, respectively. Uranium is shown to be abundant in the carbonate and iron rich fractions of conglomerate sediment. Appropriate models are proposed in each case study.     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

A study on LH- and FSH-RIA kits by immunoradiometric assay

An evaluation of LH- and FSH-RIA BEAD kits based on IRMA was carried out. The results obtained with the methods characterized by the use of monoclonal antibodies, i.e., one is linked to solid phase, and another is isotopically labeled, were compared with those determined by the Daiichi LH- and FSH-kits. Intra- and inter-assay precision, recovery, linearity, and specificity of both methods were favorable without exceptions. The cross reactivity of the LH kit to 5,000 mIU/ml hCG revealed within the range of less than 3 mIU/ml. Significant correlations were observed between the results derived from conventional Daiichi LH- and FSH-kits. The results from the conventional kits exhibited 30 to 40% of those from the Daiichi kits, considered to be mainly due to the difference in standard calibrations used. Among the individuals within the normal menstrual cycle, the serum LH- and FSH-levels determined by the present kits gave a typical pattern with a peak in the preovulatory phase. On the other hand, the LH- and FSH-values of individuals in normal pregnancy revealed strikingly decreased in comparison with those of non-pregnant women.