Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

Korrosion und Schutzanstriche

Ohne Zusammenfassung     

Accelerated glycosylation under frozen conditions

O-Glycosylations using thiomethyl glycosides as donors were compared under both frozen and unfrozen conditions. In the presence of MeOTf as a promoter, enormous rate acceleration was observed when the glycosylation was conducted in p-xylene below its freezing point.     

Hyperbolic-parabolic singular perturbation for quasilinear equations of Kirchhoff type

We consider a hyperbolic-parabolic singular perturbation problem for a quasilinear equation of Kirchhoff type, and obtain parameter-dependent time decay estimates of the difference between the solutions of a quasilinear dissipative hyperbolic equation of Kirchhoff type and the corresponding quasilinear parabolic equation. For this purpose we show time decay estimates for hyperbolic-parabolic singular perturbation problem for linear equations with a time-dependent coefficient.     

HPLC determination of (+)-pseudoephedrine and (-)-ephedrine in Japanese herbal medicines containing Ephedra herb using solid-phase extraction

We developed a rapid and simple HPLC method combined with solid-phase extraction (SPE) for quantitative analysis of (+)-pseudoephedrine (PEP) and (-)-ephedrine (EP) in Japanese herbal (Kampo) medicines such as Kakkon-to, Sho-seiryu-to, Goshaku-san and Bofu-tsusho-san. SPE was performed on TOYOPAK IC-SP M containing propylsulfonic groups. Determination of PEP and EP was carried out using ion-pair reversed-phase HPLC with sodium dodecyl sulfate. N-Benzyldiethylamine was used as an internal standard. The analytical procedure was validated with regard to specificity, linearity, accuracy, and precision. These data suggest that the analytical method developed in this study is useful for quantitative analysis of PEP and EP in various formulations of Kampo medicine containing Ephedra herb.     

Lifetime of living polymers in cationic polymerization. II. Living polymerization of isobutyl vinyl ether initiated by the hydrogen iodide/zinc halide systems

In the living cationic polymerization of isobutyl vinyl ether (IBVE) initiated by the hydrogen iodide/zinc halide (HI/ZnX₂; X = I, Br, Cl) systems, the concentration ([P^*]) of the living propagating species was determined by quenching with sodiomalonic ester ( 1 ). The quenching reaction was shown to be clean, instantaneous, and quantitative to give poly (IBVE) with a terminal malonate group from which [P^*] was obtained by ¹H-NMR spectroscopy. In the polymerizations in toluene below +25°C, [P^*] was constant and equal to the initial concentration ([HI]₀) of hydrogen iodide, independent of the type and concentrations of ZnX₂ as well as monomer conversion. At 0 and +25°C, however, the living species started decaying immediately after the complete consumption of monomer. In contrast, such a decay process was absent at ?15°C even in the absence of monomer until about an hour (depending on the conditions) after the end of polymerization. The deactivation reaction was first order in [P^*], and the lifetime (half-life) of the living species was longer at lower temperature and at lower ZnX₂ concentration. On the basis of these [P^*] and lifetime measurements, the HI/ZnX₂ systems were also compared with the HI/I₂ counterpart.     

Multifunctional coupling agents for living cationic polymerization. IV. Synthesis of end-functionalized multiarmed poly(vinyl ethers) with multifunctional silyl enol ethers

Telechelic ( 8 ) and end-functionalized four-arm star polymers ( 9 ) were synthesized through the coupling reactions of end-functionalized living poly(isobutyl vinyl ether) ( 5; DP _n ～ 10) with the bi-and tetrafunctional silyl enol ethers, H_4-nC? [CH₂OC₆H₄C(OSiMe₃) = CH₂]_n ( 3: n = 2; 4: n = 4). The precursor polymers 5 were prepared by living cationic polymerization with functionalized initiators, CH₃CH(Cl)OCH₂CH₂X(6), in conjunction with zinc chloride in methylene chloride at ?15°C. The initiators 6 were obtained by the addition of hydrogen chloride gas to vinyl ethers bearing pendant functional groups X , including acetoxy [? OC(O)CH₃], styryl (? OCH₂C₆H₄-p-CH = CH₂), and methacryloyl [? OC(O)C(CH₃) = CH₂]. The coupling reactions with 3 and 4 in methylene chloride at ?15°C for 24 h afforded the end-functionalized multiarmed polymers ( 8 and 9 ) in high yield (>91%), where those with styryl or methacryloyl groups are new multifunctional macromonomers. © 1994 John Wiley & Sons, Inc.     

A lithiation approach to cordycepin analogues variously substituted at the C-8 position

Several 8-substituted cordycepins were prepared via LDA lithiation of 2′,5′-bis-O-(t-butyldimethylsilyl)-cordycepin and successive reactions of its C-8 lithiated species with various types of electrophiles. Wittig reaction of the 8-formyl derivative was also examined.     

Amphiphilic block copolymers of vinyl ethers by living cationic polymerization. II. Synthesis and surface activity of macromolecular amphiphiles with pendant amino groups

Amphiphilic block polymers of vinyl ethers (VEs). $\rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OCH}_{\rm 2} {\rm CH}_{\rm 2} {\rm NH}_{\rm 2} } \right)\rlap{--} ]_m \rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OR}} \right)\rlap{--} ]_n \left( {{\rm R: }n{\rm - C}_{{\rm 16}} {\rm H}_{{\rm 33}} ,{\rm }n{\rm - C}_{\rm 4} {\rm H}_{\rm 9} ;m \simeq 40,{\rm n} = 1 - 10} \right)$ were prepared, each of which consists of a hydrophilic segment with pendant primary amino groups and a hydrophobic poly(alkyl VE) segment. Their precursors were obtained by the HI/I₂-initiated sequential living cationic polymerization of an alkyl VE and a VE with a phthalimide pendant (CH₂ = CHOCH₂CH₂Im; Im; phthalimide group), where the segment molecular weights and compositions (m/n ratio) could be controlled by regulating the feed ratio of two monomers and the concentration of hydrogen iodide. Hydrazinolysis of the imide functions gave the target polymers which were readily soluble in water under neutral conditions at room temperature. These amphiphilic block polymers lowered the surface tension of their aqueous solutions (0.1 wt%, 25°C) to a minimum ? 30 dyn/cm when the hydrophobic pendant R was n-C₄H₉ (n = 4–9). The polymers with n-C₄H₉ pendants in the hydrophobic segment exhibited a higher surface activity than those with n-C₁₆ H₃₃ pendants. The surface activity of the polymers also depended on the pH of the polymer solutions; the surface activity increased in more basic solutions where the ionization of the amino group (? NH₂)2? NH₃^⊕) is suppressed.