排序方式: 共有46条查询结果,搜索用时 171 毫秒
1.
Hidemasa Yamaguchi Yuji Minoura 《Journal of polymer science. Part A, Polymer chemistry》1970,8(6):1467-1479
Optically active N-bornylmaleimide (NBMI) was copolymerized with styrene, methyl methacrylate, and vinylidene chloride with a free-radical catalyst to obtain optically active copolymers. The monomer reactivity ratios for the radical copolymerization of NBMI (M2) with styrene, methyl methacrylate, and vinylidene chloride were: ST-NBMI, r1 = 0.13, r2 = 0.05; MMA-NBMI, r1 = 2.02, r2 = 0.16; VCl2-NBMI, r1 = 1.15, r2 = 0.47. The Q-e values for NBMI were Q2 = 0.48 and e2 = +1.47. The specific rotation and optical rotatory dispersion of these copolymers were measured. The correlation between the specific rotation and composition of these copolymers was not linear. The value of λc for each copolymer was independent of the copolymer composition and the comonomer, being 260 mμ for the St-NBMI system, 262 mμ for the MMA-system, and 260 mμ for the VCl2-NBMI system. The effects of solvents and temperature on the specific rotation of these copolymers were investigated. 相似文献
2.
Masahiro Kurokawa Hidemasa Yamaguchi Yuji Minoura 《Journal of polymer science. Part A, Polymer chemistry》1979,17(2):485-492
l-Menthyl vinyl ether (l-MVE) was homopolymerized and copolymerized with the monomers indene (IN) and acenaphthylene (ANp) by BF3OEt2 as a catalyst. The chiral menthyl substituent was cloven from the homopolymers and copolymers using dry-hydrogen bromide gas. After the removal of optically active menthyl group, poly(vinyl alcohol) (PVA) from l-MVE homopolymer was optically inactive, and copolymers (VA-IN, VA-ANp) from l-MVE-IN and l-MVE-ANp copolymers were still optically active. Hence, in the case of l-MVE homopolymer, it was concluded that asymmetric induction in the polymer main chain can only produce pseudoasymmetry. In the case of l-MVE-IN and l-MVE-ANp copolymers, it was found that asymmetric induction proceeded in the copolymer main chain and was caused by the influence of chiral menthyl group. 相似文献
3.
Compact Dry TC qualifies as a rapid method kit for determining aerobic colony counts in foods. The plates are presterilized and contain culture medium and a cold-soluble gelling agent. The medium is rehydrated by inoculating 1 mL diluted sample into the center of the self-diffusible medium and allowing the solution to diffuse by capillary action. The plates can then be incubated and the colonies counted without any additional steps. The Compact Dry TC method was validated with 5 different raw meats. The performance tests were conducted at 35 degrees and 30 degrees C. In all required performance studies, no apparent differences were observed between the Compact Dry TC method and the Standard Pour Plate method (AOAC Official Method 966.23) for the detection level of aerobic microorganisms. For the accuracy claim (n = 60), a correlation factor of r2(35) = 0.9977 (35 degrees C) and r2(30) = 0.9932 (30 degrees C) could be assigned, as stated in the application for "Performance Tested Method." Quality consistency and storage robustness studies, showed no significant variations in plate count results with different production lots or plates of diverse storage age. 相似文献
4.
Hidemasa Yamaguchi Hiroshi Ueno Yuji Minoura 《Journal of polymer science. Part A, Polymer chemistry》1971,9(4):887-895
The melt and solution condensation copolymerization of nylon salts which were prepared from d-camphoric acid and adipic acid with hexamethylenediamine were carried out, and optically active copolyamides were obtained. The copolyamides obtained had a positive specific rotation. The specific rotations for the copolyamides increased with increasing content of d-camphoryl units in the copolymers. The optical rotatory dispersion of the copolyamides had positive curves and were found to fit the simple Drude equation. The λc values of the polymers obtained by the melt and solution condensation polymerization were 241 mμ and 245 mμ, respectively. 相似文献
5.
Hidemasa Okamoto Shoichi Adachi Tadashi Iwai 《Journal of polymer science. Part A, Polymer chemistry》1979,17(5):1267-1277
The γ-ray-induced addition reaction of carbon tetrachloride onto syndiotactic 1,2-polybutadiene film and liquid 1,2-polybutadiene was carried out at room temperature. In the film gelation was pronounced and the rate of addition increased as the crystallinity of the polymer decreased. In the liquid gelation, which makes the polymer insoluble in carbon tetrachloride, did not take place, although a definite crosslinking reaction was noticed. In this case the appearance of the product changed from a viscous liquid to a white powder as the reaction proceeded. Its structure was compared with that of chlorinated 1,2-polybutadiene. The addition of carbon tetrachloride to the vinyl group in liquid 1,2-polybutadiene caused an anti-Markownikoff-type reaction and was accompanied by an unexpectedly large vinyl depletion in the polymer. The total decrease in the vinyl group was found to be much larger than that brought about by the addition of carbon tetrachloride. This discrepancy was attributed to a cyclization and crosslinking reaction ascribed to the vinyl group bound by the main chain. Cyclization and crosslinking were less noticeable in the chlorination than in the carbon tetrachloride. 相似文献
6.
Hidemasa Azuma Yuzuru Katagiri Shinichi Yamabe 《Journal of polymer science. Part A, Polymer chemistry》1996,34(8):1407-1414
Transition states (TSs) of radical addition homopolymerization reactions of methyl acrylate, methyl methacrylate, dimethyl itaconate, and N-methyl itaconimide were examined with two-unit radical models using MOPAC (PM3 UHF) semiempirical method. Calculated activation energies (Eas) show good correlations with experimental values. Calculated activation entropies (−ΔS‡s) are found to be well proportional to Eas. The entropy terms play an important role as well as Ea in radical additions. Ea depends on the angle (θrs) between reaction points of radical and of monomer at TS. The bond length between reaction points at TS is constant regardless of monomers studied. The geometries and thermodynamical properties calculated here for TS indicate the importance of steric effects caused by substituted group(s) rather than electronic perturbation energies reported previously. © 1996 John Wiley & Sons, Inc. 相似文献
7.
Hidemasa Hidaka Masao Hirayama Kazuhiko Yamada 《Journal of carbohydrate chemistry》2013,32(4):509-522
I. INTRODUCTION Recently the study of oligosaccharides has been extensively pursued in Japan after the findings of the remarkable biofunctions and usefulness of fructooligosac-charides for human health, improving the intestinal microflora and importance in livestock nutrition. 相似文献
8.
Susumu Kuwabata Hidemasa Tomiyori Shingo Masui Hiroshi Yoneyama 《Macromolecular Symposia》2000,156(1):213-222
Composite of polypyrrole and crystalline V2O5 powder was prepared by chemical oxidation of pyrrole with use of V2O5 powder itself as an oxidizing agent. The V2O5 content was changed from 0 to 94 wt% by changing the amount of V2O5 dispersed in the preparation bath. The pellet electrodes could be prepared by pressing the composite powder alone even if amount of polypyrrole in the composite was only 6 wt%. The resulting pellet electrode exhibited good charge‐discharge performance as a positive electrode of Li rechargeable battery in an electrolyte solution as well as in a quasi‐solid cell fabricated by using a gel electrolyte sheet of poly(methyl methacrylate). 相似文献
9.
Composite films have functioned as chemical bending actuators, where stretchable conducting fabrics were joined to both surfaces of ionomer films. This phenomenon shows that a direct metallization of either electroless or electrolytic plating having a metal dendrite formation on the ionomer film is not essential for functioning as actuators. Conducting fabric polymer composite (CFPC) actuators can be easily fabricated by a simple adhesion process using flexible conducting fabrics as electrodes. Due to their excellent contraction and expansion capabilities, gold‐ and copper‐plated knitted fabrics were employed and stably bound to Nafion‐117 film. Au‐CFPC actuators demonstrated a maximum bending displacement of ±2.5 mm at ±2 V. Cu‐CFPC gave a smaller displacement of ±0.7 mm at ±2 V, having no reverse displacement. The method described here is widely applicable, introducing conducting layers on various flexible, stretchable, and polymer substrates. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
10.
A novel method for the synthesis of 4-phenylquinazolinones via a palladium-catalyzed domino reaction of o-aminobenzamides with benzyl alcohols is developed. This protocol involves N-benzylation, benzylic C-H amidation, and dehydrogenation in water, which may play an important role in the smooth generation of the (η(3)-benzyl)palladium species by activation of the hydroxyl group of the benzyl alcohol. 相似文献