Rheology of binary colloidal structures assembled via specific biological cross-linking

The selectivity and range of energies offered by specific biological interactions serve as valuable tools for engineering the assembly of colloidal particles into novel materials. In this investigation, high affinity biological interactions between biotin-coated "A" particles (RA = 0.475 microm) and streptavidin-coated "B" particles (RB = 2.75 microm) drive the self-assembly of a series of binary colloidal structures, from colloidal micelles (a large B particle coated by smaller A particles) to elongated chain microstructures (alternating A and B particles), as the relative number of small (A) to large (B) particles (2 < or = NA/NB < or = 200) is decreased at a low total volume fraction (10(-4) < or = phiT < or = 10(-3)). At a significantly higher total volume fraction (phiT > or = 10(-1)) and a low number ratio (NA/NB = 2), the rheological behavior of volume-filling particle networks connected by streptavidin-biotin bonds is characterized. The apparent viscosity (eta) as a function of the shear rate gamma, measured for networks at phiT = 0.1 and 0.2, exhibits shear-rate-dependent flow behavior, and both the apparent viscosity and the extent of shear thinning increase upon an increase of a factor of 2 in the total volume fraction. Micrographs taken before and after shearing show a structural breakdown of the flocculated binary particle network into smaller flocs, and ultimately a fluidlike suspension, with increasing shear rate. Rheological measurements provide further proof that suspension microstructure is governed by specific biomolecular interactions, as control experiments in which the streptavidin molecules on particles were blocked displayed Newtonian flow behavior. This investigation represents the first attempt at measuring the rheology of colloidal suspensions where assembly is driven by biomolecular cross-linking.     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

Synthesis,Antibacterial, and Antioxidant Evaluation of Novel Series of Condensed Thiazoloquinazoline with Pyrido,Pyrano, and Benzol Moieties as Five- and Six-Membered Heterocycle Derivatives

A novel synthesis of thiazolo[2,3-b]quinazolines 4(a–e), pyrido[2′,3′:4,5]thiazolo[2,3-b]quinazolines {5(a–e), 6(a–e), and 7(a–e)}, pyrano[2′,3′:4,5]thiazolo[2,3-b]quinazolines 8(a–e), and benzo[4,5]thiazolo[2,3-b]quinazoloine9(a–e) derivatives starting from 2-(Bis-methylsulfanyl-methylene)-5,5-dimethyl-cyclohexane-1,3-dione 2 as efficient α,α dioxoketen dithioacetal is reported and the synthetic approaches of these types of compounds will provide an innovative molecular framework to the designing of new active heterocyclic compounds. In our study, we also present optimization of the synthetic method along with a biological evaluation of these newly synthesized compounds as antioxidants and antibacterial agents against the bacterial strains, like S. aureus, E. coli, and P. aeruginosa. Among all the evaluated compounds, it was found that some showed significant antioxidant activity at 10 μg/mL while the others exhibited better antibacterial activity at 100 μg/mL. The results of this study showed that compound 6(c) possessed remarkable antibacterial activity, whereas compound 9(c) exhibited the highest efficacy as an antioxidant. The structures of the new synthetic compounds were elucidated by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR.     

Novel microscopic mechanism of intermixing during growth on soft metallic substrates

Generic computer simulations using empiric interatomic potentials suggest a new, collective mechanism that could be responsible for mixing at heteroepitaxial interfaces. Even if single adsorbate atoms diffuse by hopping on the substrate surface and do not mix at the terraces, two-dimensional islands formed by nucleation may become unstable above a certain critical size and explode upwards forming clusters of several atomic layers. This process is accompanied by strong distortions of the underlying atomic layers, and on soft materials it can result in surface etching and incorporation of substrate atoms into the islands.     

The use of an automatic on-line system for monitoring penicillin cultivation in a bubble-colum loop reactor

Penicillium chrysogenum is cultivated by a fed-batch mode to produce penicillin V. During fermentation, the concentrations of the medium components must be held at predetermined levels, which will change during fermentation, e.g., in the growth phase the concentration of the carbon sources and the nitrogen sources (urea and ammonium) must be high enough to maximize biomass production, whereas in the production stage these sources should be limited. To achieve optimal substrate concentrations, continuous measurement of various components in the fermentation broth is necessary. This is done by using a sterilizable ultrafiltation sampling probe and an air-segmented automatic flow analysis system to determine reducing sugars, dissolved organic carbon, ammonium, urea, sulfate, phosphate and penicillin V concentrations; spectrophotometric and gas-sensing electrodes are used in order to guarantee dependable results throughout the 290-h fermentation process, the analysis system is automatically cleaned and calibrated, and blanks are determined. The results are stored and evaluated by computer.     

On-line monitoring of media components during the production of cephalosporin C

For optimum process management, substrates and products should be monitored continuously, because substrates are expensive, and because catabolic repression can be avoided. The main problem is continuous sampling. A cross-flow, hollow-fiber filtration module is described for the removal of solid-free samples from the high-solids medium required for cephalosporin-C production. The solids-free medium then permeates through a membrane, and is transported through air-segmented flow systems which quantify glucose (enzyme electrode), ammonia (ammonia-selective electrode), phosphate (molybdenum blue spectrophotometry), sulfate (methylthymol blue/barium), methionine (sodium nitroprusside) and cephalosporin (direct u.v. absorbance). The methods for glucose, methionine and cephalosporin are described in detail. The system is controlled by computer.     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

An Identification Problem for First-Order Degenerate Differential Equations

We study a first-order identification problem in a Banach space. We discuss the nondegenerate and mainly the degenerate case. As a first step, suitable hypotheses on the involved closed linear operators are made in order to obtain unique solvability after reduction to a nondegenerate case; the general case is then handled with the help of new results on convolutions. Some applications to partial differential equations motivate this abstract approach.Communicated by I. GalliganiWork partially supported by MIUR (Ministero dell’ Istruzione, dell’ Università e dalla Ricerca), Project PRIN 2004011204 “Analisi Matematica nei Problemi Inversi,” and by the University of Bologna Funds for Selected Research Topics.