Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

On the connectedness of partially balanced block designs

The necessary and sufficient conditions for m-associate partially balanced block (PBB) designs to be connected are given. This generalizes the criterion for m-associate partially balanced incomplete block (PBIB) designs, which has originally been established by Ogawa, Ikeda and Kageyama (1984, Proceedings of the Seminar on Combinatorics and Applications, 248–255, Statistical Publishing Society, Calcutta).This work was partially supported by the Polish Academy of Sciences Grant No. MR I.1-2/2.     

Magnetism in very thin films of permalloy measured by spin polarized cascade electrons

The spin polarizationP of the low energy cascade electrons excited with a primary unpolarized electron beam is measured with ultrathin films of permalloy (Ni₈₀Fe₂₀) as a function of film thickness, external magnetic field, and temperatureT. Surface adsorbates of small concentrations of less than 10% of a monolayer can change the Curie point and the saturation value ofP ₀(T0) by as much as 30%. The Ta-substrate induces a magnetically dead region in permalloy. Conventional spin wave theory cannot account for the observed smallT-dependence of the magnetizationM. Films on a nonmagnetic substrate are compared to similar films coupled to bulk permalloy over an interface of Ta. TheT-dependence ofM with the coupled films can be explained by spin wave theory. At lowT, the films coupled to the bulk exhibit a faster decrease ofM than the uncoupled films. We propose that this thermal stabilization of the magnetization in very thin ferromagnetic films is due to quenching of the long wavelength spin modes.     

A new approach to phosphoserine and phosphothreonine analysis in peptides and proteins: chemical modification,enrichment via solid-phase reversible binding,and analysis by mass spectrometry

beta-Elimination of the phosphate group on phosphoserine and phosphothreonine residues and addition of an alkyldithiol is a useful tool for analysis of the phosphorylation states of proteins and peptides. We have explored the influence of several conditions on the efficiency of this PO(4)(3-) elimination reaction upon addition of propanedithiol. In addition to the described influence of different bases, the solvent composition was also found to have a major effect on the yield of the reaction. In particular, an increase in the percentage of DMSO enhances the conversion rate, whereas a higher amount of protic polar solvents, such as water or isopropanol, induces the opposite effect. We have also developed a protocol for enrichment of the modified peptides, which is based on solid-phase covalent capture/release with a dithiopyridino-resin. The procedure for beta-elimination and isolation of phosphorylated peptides by solid-phase capture/release was developed with commercially available alpha-casein. Enriched peptide fragments were characterized by MALDI-TOF mass spectrometric analysis before and after alkylation with iodoacetamide, which allowed rapid confirmation of the purposely introduced thiol moiety. Sensitivity studies, carried out in order to determine the detection limit, demonstrated that samples could be detected even in the low picomolar range by mass spectrometry. The developed solid-phase enrichment procedure based on reversible covalent binding of the modified peptides is more effective and significantly simpler than methods based on the interaction between biotin and avidin, which require additional steps such as tagging the modified peptides and work-up of the samples prior to the affinity capture step.     

Two-Color Two-Photon Excitation of Fluorescence

Abstract— We report the observation of two-photon excitation of an organic fluorophore with two different wavelengths, a phenomenon we refer to as two-color two-photon (2C2P) excitation. Ultraviolet emission of p -Merphenyl at 340 nm was observed when the sample was illuminated with both 375 and 750 nm pulses from a picosecond dye laser. The emission of p -terphenyl was about 100-fold and more than 1000-fold less for illumination at only 375 or 750 nm, respectively. Observation of the 2C2P signal required temporal and spatial overlap of the 375 and 750 nm pulses. The amplitude of the signal depended on the polarization of each beam. 2C2P excitation can have applications in fluorescence microscopy and elsewhere when spatially localized excitation is desirable.     

Determination of selected elements in bone samples by neutron activation and γ-spectrometry

A non-destructive method for the quantification of eleven elements in bone samples is described. The analytical scheme is based on short (30 s) irradiation with thermal neutrons followed immediately (decay time 10 s) by counting fluorine-20 for 30 s and, after a total waiting time of 150 s, by 10-min γ-spectrometry counting, which give data for Ca, Cl, Mg, Mn, Na, and V. Use of a boron carbide shield for a second set of irradiations with epithermal neutrons permits the additional determination of bromine and strontium and calculation of the contribution of aluminium and phosphorus to the total activity of ₂₈Al.     

Automatisches Verfahren zur Bestimmung des Bleioxidgehalts von Grauoxid durch Messung der L?sungsw?rme

Zusammenfassung Für das zur Herstellung von Bleibatterien verwendete Grauoxid (bestehend aus einem feinteiligen Gemisch von ca. 60 bis 90% Bleioxid, PbO, und einem Rest metallischem Blei) wurde ein Verfahren zur kontinuierlichen bzw. quasikontinuierlichen, automatischen Bestimmung des PbO-Gehaltes an den Fertigungsanlagen benötigt. Eine schnelle Analyse mit vergleichsweise geringem Aufwand war durch Messung der Lösungswärme bei Behandlung einer abgewogenen Menge Grauoxid mit verd. Essigsäure möglich. Unter technisch bequem realisierbaren Bedingungen wurden Temperaturerhöhungen von einigen Grad erhalten. Der Einfluß verschiedener Arbeitsbedingungen, der verschiedenen PbO-Modifikationen und der Teilchengröße und -form wurde untersucht. Zur Zeit wird eine für die Fertigung bestimmte, automatische Apparatur aufgebaut, die bei einer Analysenfolge von 1 min die Bestimmung mit einer Standardabweichung unter ±1% durchzuführen gestattet.

---

Automatic procedure for the determination of the lead oxide content of gray oxides by measurement of the heat of solution

A continuous or semicontinuous automatic method for the determination of the lead oxide content was needed in the manufacturing process of gray oxides (a fine particle mixture of about 60 to 90% lead oxide, PbO, and metallic lead, used in manufacturing lead batteries).A rapid determination with comparatively small effort was possible by measuring the heat of solution of a weighed amount of gray oxides treated with acetic acid. Temperature rise of a few degrees could be reached under technically realisable conditions. The influence of different working conditions, of the particle size and shape and of the PbO modifications were investigated. An automatic apparatus for the determination is at present being built and will give one determination per minute with a standard deviation of less than ±1%.

     

X‐ray investigations of bicyclic α‐methylene‐δ‐valerolactones. V. (4aS,7R,8aR)‐7‐Isopropenyl‐4a‐methyl‐3‐methyleneperhydrochromen‐2‐one

The title compound, C₁₄H₂₀O₂, adopts a conformation in which the δ‐valerolactone and cyclohexane rings are almost coplanar with one another. The γ‐methyl substituent occupies an axial position with respect to the cyclohexane ring. The δ‐valerolactone moiety adopts an envelope arrangement, while the cyclohexane ring exists in a chair conformation.