Fast concentration of dissolved forms of cesium radioisotopes from large seawater samples

The method developed for cesium concentration from large freshwater samples was tested and adapted for analysis of cesium radionuclides in seawater. Concentration of dissolved forms of cesium in large seawater samples (about 100 L) was performed using composite absorbers AMP-PAN and KNiFC-PAN with ammonium molybdophosphate and potassium–nickel hexacyanoferrate(II) as active components, respectively, and polyacrylonitrile as a binding polymer. A specially designed chromatography column with bed volume (BV) 25 mL allowed fast flow rates of seawater (up to 1,200 BV h^?1). The recovery yields were determined by ICP-MS analysis of stable cesium added to seawater sample. Both absorbers proved usability for cesium concentration from large seawater samples. KNiFC-PAN material was slightly more effective in cesium concentration from acidified seawater (recovery yield around 93 % for 700 BV h^?1). This material showed similar efficiency in cesium concentration also from natural seawater. The activity concentrations of ¹³⁷Cs determined in seawater from the central Pacific Ocean were 1.5 ± 0.1 and 1.4 ± 0.1 Bq m^?3 for an offshore (January 2012) and a coastal (February 2012) locality, respectively, ¹³⁴Cs activities were below detection limit (<0.2 Bq m^?3).     

Influence of polarity of solvents on the spectral properties of bichromophoric coumarins

Absorption and fluorescence spectra of bichromophoric coumarins were investigated in different solvents and in polymer matrices. These bichromophoric coumarins were composed of a coumarin dimethylamino-substituted at position 7 or unsubstituted coumarin and phthalimide or a 1,8-naphthylimide linked with an iminomethyl bridge to the position 3 or 8 of the coumarin ring. Absorption spectra of 7-dimethylamino derivatives in position 3 of coumarin were quite similar, exhibiting broad bands around 430-440 nm like the parent compound 7-dimethylaminocoumarin-3-carbaldehyde. For coumarin derivatives substituted in position 8, the absorption maximum was shifted to shorter wavelength as for derivatives without position 7 dimethylamino substitution. The most intense fluorescence was observed for 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin in polar solvent, while intense fluorescence was observed for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxobenz[de]isoquinolinyl)iminomethyl]-coumarin in non polar solvent (chloroform), comparable with the fluorescence of 7-amino-4-methylcoumarin. Spectral measurements of bichromophoric coumarins in polymer matrices revealed that the maxima lies in between those for chloroform and methanol yielding more intense fluorescence then in solutions. Completely different solvent effects were observed for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxobenz[de]isoquinolinyl)imino-methyl]coumarin and 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin. With addition of polar methanol the intensity of fluorescence decreases, yielding a Stern-Volmer-like constant of 0.54 dm3 mol?1 for 7-(N,N-dimethylamino)-3-[N-(1,3-dioxo-benz[de]isoquinolinyl)iminomethyl]coumarin and an even higher one of 1.08 dm3·mol?1 for 7-dimethylaminocoumarin-3-carbaldehyde compared to the rather low one of 0.024 dm3 mol?1 for 7-amino-4-methylcoumarin. Contrary to this, addition of methanol under identical conditions brings about an increase in fluorescence intensity of 7-(N,N-dimethylamino)-3-[(N-phtalimidoyl)iminomethyl]coumarin (about 60-fold). The reasons for these different solvent effects are discussed.     

A step towards the electrophotonic nose: integrating 1D photonic crystals with organic light‐emitting diodes and photodetectors

An innovative integrated sensing platform for the detection of various chemical analytes via translating the photonic stop‐band shift of a one‐dimensional photonic crystal (PC) into an electrical current change is proposed. The miniaturized sensing platform features an organic light‐emitting diode (OLED) as a light source and an organic photodetector (OPD) as a light sensor and allows for the detection of ethanol vapor concentrations down to ≈ 10 parts per million (ppm) in nitrogen, which corresponds to a stop‐band shift of ≈ 27 pm. The resolution of the proposed platform exceeds the capabilities of most commercial spectrometers and by far the human eye, while, at the same time, such a sensor is less expensive and less power consuming than a spectrometer. The presented setup is generic and can detect optical changes in the transmission of PCs, which can be induced by both vapor adsorption or by a liquid analyte, as demonstrated with a microfluidic setup.     

Kinetic modeling of benzene and toluene decomposition in air and in flue gas under electron beam irradiation

Computer simulations of benzene and toluene decomposition in air (79% N₂+21% O₂) and in flue gas (87% N₂+10% O₂+3% H₂O+160 ppm SO₂+80 ppm NO) under electron beam (EB) irradiation were carried out using computer code KINETIC and GEAR method. 285 reactions involving 73 species and 294 reactions involving 78 species were considered for simulation of benzene and toluene decomposition, respectively. Calculation results of benzene and toluene decomposition in air under electron beam agree well with the published experimental results. OH radicals play a main role in benzene or toluene decomposition.     

Transformation of 4‐oxo‐4H‐[1]‐benzopyran‐3‐carboxaldehydes into pyrazolo[3,4‐B]pyridines

Reaction of 6‐methyl‐4‐oxo‐4H‐[1]‐benzopyran‐3‐carboxaldehyde 1 with 5‐amino‐3‐methyl‐1‐phenylpyrazole 2 in alcoholic reaction media in the presence of 4‐toluenesulfonic acid as catalyst afforded 5‐(2‐hydroxy‐5‐methylbenzoyl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine 3 and 2‐methoxy‐6‐methyl‐3‐(3‐methyl‐1‐phenylpyrazol‐5‐ylaminomethylene)chroman‐4‐one 7 . We explain the mechanism of formation of both products on the basis of kinetic study of individual reaction steps.     

Large Volume Injection in Fast Gas Chromatography with On‐Column Injector

In this work a fast gas chromatography set‐up with on‐column injection was optimized and evaluated with a model mixture of C₈–C₂₈ n‐alkanes. Usual injection volumes when using narrow‐bore (e. g., 0.1 mm i.d.) analytical columns are ca. 0.1 μL. The presented configuration allows introduction of 10–30‐fold larger sample volumes without any distortion of peak shapes. In the set‐up a normal‐bore retention gap (1 m×0.32 mm i. d.) was coupled to a narrow‐bore (4.8 m×0.1 mm i. d.×0.4 μm film thickness) analytical column using a low dead volume column connector. The effects of the experimental conditions such as inlet pressure, sample volume, initial injection temperature, and oven temperature on a peak focusing are discussed. H‐u curves for helium and hydrogen are used to compare their suitability for high speed gas chromatography and to show the dependence of separation efficiency on the carrier gas velocity at high inlet pressures. In the fast gas chromatography system a baseline separation of C₁₀–C₂₈ n‐alkanes was achieved in less than 3 minutes.     

Self‐association,tautomerism and E–Z isomerization of isatin–phenylsemicarbazones – spectral study and theoretical calculations

The self‐association and tautomerism of (E)‐isatin‐3‐4‐phenyl(semicarbazone) Ia and (E)‐N‐methylisatin‐3‐4‐phenyl(semicarbazone) IIa were investigated in solvents of various polarity. In weakly interacting non‐polar solvents, such as CHCl₃ and benzene, phenylsemicarbazone concentrations above 1×10^?5 mol dm^?3 result in the formation of dimers or higher aggregates of E‐isomers Ia and IIa . This aggregate formation prevents room temperature E–Z isomerization of Ia and IIa to more stable Z‐isomers. In contrast to the situation in non‐polar solvents, E–Z isomerization from the monomeric form of phenylsemicarbazone Ia and IIa E‐isomers occurs in highly interactive polar solvents including MeOH and DMF only at temperatures above 70 °C. Moreover, decrease in phenylsemicarbazone concentration below 1×10^?4 mol dm^?3 in these highly solute–solvent interacting systems leads to aggregate dissociation, and a new hydrazonol tautomeric form with a high degree of conjugation predominates in these solutions. Theoretical calculations confirm obtained experimental results. Copyright © 2013 John Wiley & Sons, Ltd.     

Spectral properties of substituted coumarins in solution and polymer matrices

The absorption and fluorescence spectra of substituted coumarins (2-oxo-2H-chromenes) were investigated in solvents and in polymer matrices. The substitutions involved were: (1) by groups with varying electron donating ability such as CH?, OCH? and N(CH?)?, mainly, but not exclusively, in positions 7 and (2), by either CHO or 4-PhNHCONHN=CH- in position 3. While the spectra of non-substituted coumarin-3-carbaldehyde has absorptions at approximately 305 and 350 nm, substitution at position 7 leads to remarkable changes in the shape of the absorption spectrum and shifts the absorption to a longer wavelength. Similarly, the replacement of the formyl group with a semicarbazide group substantially influences the shape of the absorption spectrum, and coumarins which have only N(CH?)? in position 7 experience small changes. These changes are associated with the increasing intramolecular charge transfer (ICT) character and increasing conjugation length of the chromophoric system, respectively, in the studied molecules. The fluorescence is almost negligible for derivatives which have H in this position. With increasing electron donating ability, and the possibility of a positive mesomeric (+M) effect of the substituent in position 7 of the coumarin moiety, the fluorescence increases, and this increase is most intense when N(CH?)? substitutes in this position, for both 3-substituted derivatives. Spectral measurements of the studied coumarins in polymer matrices revealed that the absorption and fluorescence maxima lay within the maxima for solvents, and that coumarins yield more intense fluorescence in polymer matrices than when they are in solution. The quantum yield of derivatives which have a dimethylamino group in position 7 in polymer matrices approaches 1, and the fluorescence lifetime is within the range of 0.5-4 ns. The high quantum yield of 7-dimethylamino derivatives qualifies them as laser dyes which have k(F) higher than k(nr) in the given medium. This is caused by stiffening of the coumarin structure in polar polymer matrices, such as PMMA and PVC, due to higher micro-viscosity than in solution and intermolecular dipole-dipole interaction between chromophore (dopant) and matrix.     

A new method for the determination of low-level actinium-227 in geological samples

We developed a new method for the determination of ²²⁷Ac in geological samples. The method uses extraction chromatographic techniques and alpha-spectrometry and is applicable for a range of natural matrices. Here we report on the procedure and results of the analysis of water (fresh and seawater) and rock samples. Water samples were acidified and rock samples underwent total dissolution via acid leaching. A DGA (N,N,N′,N′-tetra-n-octyldiglycolamide) extraction chromatographic column was used for the separation of actinium. The actinium fraction was prepared for alpha spectrometric measurement via cerium fluoride micro-precipitation. Recoveries of actinium in water samples were 80 ± 8 % (number of analyses n = 14) and in rock samples 70 ± 12 % (n = 30). The minimum detectable activities (MDA) were 0.017–0.5 Bq kg^?1 for both matrices. Rock sample ²²⁷Ac activities ranged from 0.17 to 8.3 Bq kg^?1 and water sample activities ranged from below MDA values to 14 Bq kg^?1of ²²⁷Ac. From the analysis of several standard rock and water samples with the method we found very good agreement between our results and certified values.