Hydrodynamics of a bounded vertical film with nonlinear surface properties

The drainage of a thin liquid film with an insoluble monolayer down a vertical wall is studied. Lubrication theory is used to develop a model where the film is pinned at the top with a given thickness and the film drains into a bath at the bottom. A nonlinear equation of state is used for the surface tension and the surface viscosity is a nonlinear function of the surfactant concentration; these are appropriate for some aqueous systems. The three partial differential equations are solved via discretization in space and then the resulting differential algebraic system is solved. Results are described for a wide range of parameters, and the conditions under which the free surface is immobilized are discussed.     

Synthesis of Polymer Nanoparticles in the Presence of Diatoms as Sustainable Bio-Templates

Colloid Journal - Preparation of complex nano- and micron-sized non-spherical particulate geometries still remains a challenge. One potential approach is the utilization of natural templates with...     

Schemes for Single Electron Transistor Based on Double Quantum Dot Islands Utilizing a Graphene Nanoscroll,Carbon Nanotube and Fullerene

The single electron transistor (SET) is a nanoscale switching device with a simple equivalent circuit. It can work very fast as it is based on the tunneling of single electrons. Its nanostructure contains a quantum dot island whose material impacts on the device operation. Carbon allotropes such as fullerene (C₆₀), carbon nanotubes (CNTs) and graphene nanoscrolls (GNSs) can be utilized as the quantum dot island in SETs. In this study, multiple quantum dot islands such as GNS-CNT and GNS-C₆₀ are utilized in SET devices. The currents of two counterpart devices are modeled and analyzed. The impacts of important parameters such as temperature and applied gate voltage on the current of two SETs are investigated using proposed mathematical models. Moreover, the impacts of CNT length, fullerene diameter, GNS length, and GNS spiral length and number of turns on the SET’s current are explored. Additionally, the Coulomb blockade ranges (CB) of the two SETs are compared. The results reveal that the GNS-CNT SET has a lower Coulomb blockade range and a higher current than the GNS-C₆₀ SET. Their charge stability diagrams indicate that the GNS-CNT SET has smaller Coulomb diamond areas, zero-current regions, and zero-conductance regions than the GNS-C₆₀ SET.     

Electrocatalytic Oxidation of Ethanol on the Surface of Graphene Based Nanocomposites: An Introduction and Review to it in Recent Studies

This review gives an overview of the electrochemical investigations about the properties of various types of graphene composites in the ethanol oxidation. Various routes to provide appropriate graphene‐based materials required electrochemical techniques for investigation of different types of the materials as well as their performance and efficacy in ethanol oxidation are discussed in detail. Furthermore, it is demonstrated that the incorporation of suitable materials, e. g. noble metals (graphene‐supported binary and ternary metal nanoparticles), metal oxides, conductive polymer, etc, with graphene results in excellent electrocatalytic activity, superb durability and selectivity in ethanol oxidation. Immobilization of electrocatalytically active NPs on graphene supports using physical approaches is considered as an effective route to prepare direct ethanol fuel cell (DEFC) anode catalysts.     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

Ultrasonic assisted synthesis of nanocrystalline cellulose as support and reducing agent for Ag nanoparticles: green synthesis and novel effective nanocatalyst for degradation of organic dyes

In this study, nanocrystalline cellulose (NCC) prepared from microcrystalline cellulose using high‐intensity ultrasonication as mechanical method without any chemical treatment. The obtained NCC with around 30–50 nm diameters, utilized as support, reducing and stabilizing agent for in‐situ green and eco‐friendly synthesis of silver nanoparticles (Ag NPs). The catalytic activity of composite was examined for degradation of environmental pollutants. The structure of as‐synthesized composite (Ag@NCC) was characterized by ultraviolet–visible spectroscopy (UV–vis), field emission scanning electron microscopy (FE‐SEM); Transmission electron microscopy (TEM); Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The results of the catalytic reaction experiments showed that spherically shaped silver nanoparticles of around 20 nm distributed on the surface of nanocellulose demonstrated high catalytic efficiency towards the removal of methyl orange (MO) and 4‐nitrophenol (4‐NP).     

Preparation,Electrochemistry, and Electrocatalytic Activity of Lead Pentacyanonitrosylferrate Film Immobilized on Carbon Ceramic Electrode

Lead pentacyanonitrosylferrate (PbPCNF), a new Prussian blue analog, was immobilized on the surface of a carbon ceramic electrode (CCE) prepared by sol‐gel method. The immobilization process consists of adding a certain amount of metallic lead to the electrode matrix before gelation, and chemical derivatization of Pb on the electrode surface to a PbPCNF solid film by immersing the electrode in a solution of sodium pentacyanonitrosylferrate (PCNF). The composition of the synthesized PbPCNF was characterized by FTIR, scanning electron microscopy (SEM), and energy‐dispersive X‐ray (EDX) techniques. The resulting modified electrode showed electroactivity at two redox centers. The electrochemical behavior of the PbPCNF modified carbon ceramic electrode (PbPCNF|CCE) was studied by cyclic voltammetry. Under optimized conditions the peak‐to‐peak separation is only 39 mV, indicative of a surface reaction. Ion effects of the supporting electrolyte suggest that cations have a considerable effect on the electrochemical behavior of the modified electrode. The transfer coefficient (α) and the charge transfer rate constant at the modifying film|electrode interface (k_s) were calculated. The electrocatalytic activity of the modified electrode toward the electro‐reduction of peroxodisulfate was studied in details.     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

Ag Nanoparticle/Nanofibrillated Cellulose Composite as an Effective and Green Catalyst for Reduction of 4-Nitrophenol

In this work, silver nanoparticles (Ag NPs) prepared through in situ green and facile synthesis by using nanofibrillated cellulose (NFC) hydrogel as support, stabilizer and reducing agent by two different methods. Their catalytic abilities were examined for conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The structure of as-synthesized composites with different AgNO₃ concentrations were characterized by ultraviolet–visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy; energy dispersive spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Results show that all nanocomposites demonstrated excellent catalytic activity. Among them, Ag@NFC-2 sample, with spherical and well-dispersed Ag NPs along the nanofiber, produced by the second method having 0.25 M AgNO₃ concentration presented outstanding catalytic efficiency.